प्रोग्रेस लाइटिंग P6064-31 वॉल लँटर्न इंस्ट्रक्शन मॅन्युअल

1. उत्पादन संपलेview

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Progress Lighting P6064-31 1-Light Wall Lantern. This fixture features an oval form factor with a grid overlay and etched glass shades, finished in black. It is designed for both outdoor and suitable indoor applications.

आकृती 1: समोर view of the Progress Lighting P6064-31 Wall Lantern.

2. सुरक्षितता माहिती

चेतावणी: To avoid electric shock, ensure power is turned off at the circuit breaker or fuse box before installation or servicing. All wiring must be in accordance with national and local electrical codes. If you are unsure about wiring, consult a qualified electrician.

• जास्तीत जास्त वॅट ओलांडू नकाtagबल्बसाठी निर्दिष्ट केलेले e.
• काचेचे घटक तुटू नयेत म्हणून काळजीपूर्वक हाताळा.
• ज्वलनशील पदार्थ लाईट फिक्स्चरपासून दूर ठेवा.

3. पॅकेज सामग्री

स्थापना सुरू करण्यापूर्वी सर्व घटक उपस्थित आहेत याची खात्री करा:

• Wall Lantern Fixture (P6064-31)
• Etched Glass Shade
• माउंटिंग हार्डवेअर किट
• स्थापना पत्रक

4. तपशील

Figure 2: Product dimensions for the P6064-31 Wall Lantern.

5. स्थापना सूचना

5.1 प्री-इंस्टॉलेशन

1. सर्किट ब्रेकर किंवा फ्यूज बॉक्समधील वीज बंद करा.
2. Carefully unpack the fixture and inspect for any damage.
3. विभाग ३ मध्ये सूचीबद्ध केलेले सर्व भाग उपस्थित असल्याची खात्री करा.

5.2 Sizing and Placement Guidance

Proper sizing and placement are crucial for optimal illumination and aesthetic appeal. Refer to the video below for visual guidance.

• फिक्स्चर आकार: For entrances and garages, select fixtures that measure 1/4 to 1/3 of the door's height.
• माउंटिंग उंची: Mount fixtures at eye level, approximately 5.5 to 6 feet from the ground to the fixture's center.
• Entrance Doors: Mount lights on either side of the door, 8 to 10 feet apart.
• गॅरेजचे दरवाजे: For a one-car garage, use a single wall lantern. For two or more car garages, mount lights on either side of the doors, or across the top of the doors for even illumination.

आकृती 3: उदाample of wall lantern placement for an entryway.

आकृती 4: उदाample of wall lantern placement for a garage.

5.3 वायरिंग आणि माउंटिंग

1. प्रदान केलेले स्क्रू वापरून जंक्शन बॉक्समध्ये माउंटिंग ब्रॅकेट जोडा.
2. Connect the fixture's wires to the house wires: black to black (live), white to white (neutral), and bare copper (ground) to the house ground wire and the mounting bracket. Secure connections with wire nuts.
3. जंक्शन बॉक्समध्ये सर्व तारा काळजीपूर्वक टक करा.
4. Align the fixture with the mounting bracket and secure it with the provided screws or nuts.

३.२ बल्ब बसवणे

1. Insert one medium base incandescent bulb (not included) into the socket.
2. जास्तीत जास्त वॅट ओलांडू नकाtage 100 वॅट्स.
3. Install the etched glass shade by carefully placing it over the bulb and securing it according to the specific instructions on the included installation sheet.

6. ऑपरेटिंग सूचना

Once installed and powered, operate the wall lantern using the standard wall switch connected to the fixture's circuit. Ensure the bulb is correctly installed and the power is on at the circuit breaker.

7. देखभाल

To maintain the appearance and functionality of your fixture:

• स्वच्छता: Turn off power before cleaning. Wipe the fixture with a soft, damp कापड. अपघर्षक क्लीनर किंवा सॉल्व्हेंट्स वापरू नका, कारण ते फिनिश किंवा काचेला नुकसान करू शकतात.
• बल्ब बदलणे: Turn off power before replacing the bulb. Allow the bulb to cool completely. Replace with a new medium base incandescent bulb, not exceeding 100 Watts.

8. समस्या निवारण

If your fixture is not operating correctly, refer to the following common issues:

9. हमी आणि समर्थन

This Progress Lighting fixture is covered by a 1 वर्षांची मर्यादित वॉरंटी. ही वॉरंटी तुमच्या खरेदीबद्दल पूर्ण समाधानाची हमी देते आणि त्यात व्यावसायिक विक्री-पश्चात ग्राहक सेवा समर्थन समाविष्ट आहे.

For warranty claims or technical assistance, please refer to the contact information provided on your purchase receipt or visit the official Progress Lighting webसाइट