टेस्टो ०५६३ ८१५५ साउंड लेव्हल मीटर वापरकर्ता मॅन्युअल

1. परिचय

The Testo 0563 8155 is a precision sound level meter designed for accurate measurement of sound levels in various environments. This instrument is suitable for applications such as air conditioning, heating system analysis, machine noise assessment, and combustion system noise monitoring. It adheres to DIN/IEC 60651, class 2 standards, ensuring high accuracy and reliability. This manual provides essential information for the proper setup, operation, and maintenance of your Testo 0563 8155 sound level meter.

2. सुरक्षितता माहिती

कृपया उपकरण चालवण्यापूर्वी सर्व सुरक्षा सूचना वाचा आणि समजून घ्या. या सूचनांचे पालन न केल्यास उपकरणाला दुखापत किंवा नुकसान होऊ शकते.

• Do not expose the instrument to extreme temperatures, humidity, or direct sunlight.
• Avoid dropping the instrument or subjecting it to strong impacts.
• Do not attempt to open or modify the instrument. Refer all servicing to qualified personnel.
• Ensure the battery compartment is securely closed during operation to prevent moisture ingress.
• स्थानिक नियमांनुसार बॅटरीची विल्हेवाट लावा.

3. उत्पादन संपलेview

The Testo 0563 8155 sound level meter features a robust design with an intuitive button layout for ease of use. Below are key components and controls:

आकृती 1: समोर view of the Testo 0563 8155 Sound Level Meter, showing the display, microphone, and control buttons.

आकृती १: कोन असलेला view of the Testo 0563 8155 Sound Level Meter, highlighting its ergonomic design and side profile.

४.१ नियंत्रणे आणि प्रदर्शन

• डिस्प्ले: Shows current sound level readings, selected weighting, and time response.
• मायक्रोफोन: Located at the top, protected by a foam windscreen, for capturing sound.
• MAX/MIN बटण: Toggles between current, maximum, and minimum measured values.
• ए/सी बटण: Selects frequency weighting (A or C).
• LEVEL Button: Adjusts the measurement range (Lo, Med, Hi).
• FAST/SLOW Button: Switches between fast and slow time weighting.
• पॉवर बटण: (Typically integrated with other buttons or a dedicated switch) Turns the device on/off.
• Tripod Knuckle Screw (1/4"): Located at the bottom for mounting on a tripod.

4. सेटअप

4.1 बॅटरी इंस्टॉलेशन

1. Locate the battery compartment cover on the rear of the instrument.
2. Open the cover and insert one 9V battery, ensuring correct polarity.
3. बॅटरी कंपार्टमेंट कव्हर सुरक्षितपणे बंद करा.

The Testo 0563 8155 requires one 9V battery, which is included with the device. The typical battery life is approximately 70 hours.

4.2 Initial Adjustment

An adjustment screwdriver is included for fine-tuning the instrument. Refer to the specific calibration instructions provided with your device for detailed adjustment procedures. This ensures the meter maintains its specified accuracy.

5. ऑपरेटिंग सूचना

5.1 पॉवरिंग चालू/बंद

Press the power button (refer to your device for exact location, often combined with another function or a dedicated switch) to turn the sound level meter on. Press and hold the same button to turn it off.

5.2 Selecting Measurement Range

दाबा पातळी button to cycle through the available measurement ranges: Lo (32-80 dB), Med (50-100 dB), and Hi (80-130 dB). Select the range appropriate for the expected sound levels to ensure optimal accuracy.

5.3 Frequency Weighting (A/C)

दाबा A/C button to switch between A-weighting and C-weighting:

• A-weighting (dB(A)): Mimics the human ear's response to sound, commonly used for environmental and occupational noise measurements.
• C-weighting (dB(C)): Provides a flatter response, suitable for measuring peak sound pressure levels or machine noise.

5.4 Time Weighting (FAST/SLOW)

दाबा जलद/स्लो button to select the desired time weighting:

• जलद: Responds quickly to changes in sound level, suitable for capturing transient noise events.
• मंद: Provides an averaged reading, useful for measuring steady noise levels.

5.5 Maximum and Minimum Value Memory

दाबा MAX/MIN button to display the maximum or minimum sound level recorded since the last reset. Pressing it again will cycle back to the current reading or show the other stored value. To clear the memory, refer to the specific instructions in your device's full manual, as this often involves a long press or specific button combination.

5.6.१ मोजमाप घेणे

1. इन्स्ट्रुमेंट चालू करा.
2. Select the appropriate measurement range using the पातळी बटण
3. Choose the desired frequency weighting (A or C) with the A/C बटण
4. Set the time weighting (FAST or SLOW) using the जलद/स्लो बटण
5. Hold the meter in the area where sound is to be measured, ensuring the microphone is unobstructed and pointed towards the sound source.
6. Read the sound level directly from the display.

6. देखभाल

6.1 स्वच्छता

Wipe the instrument with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure no moisture enters the microphone or other openings.

6.2 बॅटरी बदलणे

When the battery indicator appears on the display, replace the 9V battery as described in Section 4.1. Always use a fresh, high-quality 9V battery.

५.८.१ स्टोरेज

When not in use for extended periods, remove the battery to prevent leakage. Store the instrument in a clean, dry place within the specified storage temperature range of 14 to 140 °F (-10 to 60 °C).

7. समस्या निवारण

• शक्ती नाही: Check if the battery is correctly installed and fully charged. Replace the battery if necessary.
• चुकीचे वाचन: Ensure the correct measurement range, frequency weighting, and time weighting are selected for the application. Verify the microphone is unobstructed. Consider recalibration if issues persist.
• डिस्प्ले समस्या: If the display is blank or shows erratic characters, try replacing the battery. If the problem continues, contact customer support.

8. तपशील

9. हमी आणि समर्थन

For warranty information and technical support, please contact Testo AG directly or visit their official webसाइट. कोणत्याही वॉरंटी दाव्यांसाठी खरेदीचा पुरावा म्हणून तुमची खरेदी पावती ठेवा.