टेस्टो ०५६० ८३१२ ८३०-टी१ आयआर थर्मामीटर सूचना पुस्तिका

1. परिचय

This manual provides essential instructions for the safe and effective use of the Testo 0560 8312 830-T1 IR Thermometer. This device is designed for non-contact measurement of surface temperatures in various industrial and trade applications. It features 12:1 optics and a dual laser for precise targeting, allowing for accurate temperature readings even on smaller objects from a safe distance.

2. सुरक्षितता माहिती

Please read this section carefully before operating the device to ensure safe and proper use.

• Do not point the laser directly into eyes or at other people.
• स्फोटक वातावरणात उपकरण वापरू नका.
• Protect the device from extreme temperatures, impacts, and strong vibrations.
• डिव्हाइस स्वच्छ आणि कोरडे ठेवा.
• या मॅन्युअलमध्ये वर्णन केल्याप्रमाणे फक्त त्याच्या हेतूसाठीच डिव्हाइस वापरा.
• दुरुस्ती केवळ अधिकृत कर्मचाऱ्यांकडूनच केली पाहिजे.

3. उत्पादन संपलेview

The Testo 830-T1 IR Thermometer is a handheld device designed for quick and accurate non-contact temperature measurements.

Figure 1: Testo 830-T1 Infrared Thermometer with included battery.

आकृती 2: समोर view of the Testo 830-T1, showing the display, measurement trigger, and control buttons.

3.1 घटक

• इन्फ्रारेड सेन्सर: Located at the front of the device, used for non-contact temperature measurement.
• ड्युअल लेझर पॉइंटर्स: Two laser dots indicate the measurement spot size.
• डिस्प्ले: Shows temperature readings, measurement units, battery status, and other indicators.
• मापन ट्रिगर: Activates the measurement and laser.
• नियंत्रण बटणे: For navigating menus, adjusting settings (e.g., emissivity, units), and accessing functions like MIN/MAX.
• बॅटरी कंपार्टमेंट: Located in the handle for battery installation.

4. सेटअप

4.1 बॅटरी इंस्टॉलेशन

1. थर्मामीटरच्या हँडलवर बॅटरी कंपार्टमेंट कव्हर शोधा.
2. कव्हर उघडा.
3. Insert two AAA batteries, ensuring correct polarity (+/-). The device requires 2 AAA batteries, which are included.
4. बॅटरी कंपार्टमेंट कव्हर सुरक्षितपणे बंद करा.

4.2 Initial Power-On and Unit Selection

Upon first use or after battery replacement, the device will power on. You may need to select your preferred temperature unit (Celsius or Fahrenheit).

• To change units: Typically, this involves pressing and holding a specific button (often the 'Mode' or 'Set' button, or an arrow button) while the device is off, then powering it on, or accessing a menu option. Refer to the on-screen prompts or the official Testo documentation for the exact procedure for your specific device firmware, as methods can vary.

5. ऑपरेटिंग सूचना

5.1.१ मोजमाप घेणे

1. Point the infrared sensor towards the target object.
2. Press and hold the measurement trigger. The dual laser pointers will activate, indicating the measurement spot.
3. The temperature reading will appear on the display.
4. Release the trigger to hold the last measured value (HOLD function).

Figure 3: The Testo 830-T1 in use, measuring the surface temperature of a radiator.

5.2 Understanding 12:1 Optics and Dual Laser

The 12:1 optics mean that at a distance of 12 inches, the measurement spot diameter is 1 inch. The dual laser pointers converge at the center of this measurement spot, helping you accurately identify the area being measured. This is particularly useful for measuring smaller objects or from a greater distance.

७.० मिनिट/कमाल फंक्शन

The device can display the minimum and maximum temperatures recorded during a continuous measurement. This function is useful for monitoring temperature fluctuations over a period.

• To activate MIN/MAX: Press the appropriate button (refer to your device's specific button layout, often an arrow or 'Mode' button) while taking a measurement. The display will cycle through current, minimum, and maximum values.

5.4 Emissivity Adjustment

Emissivity is a measure of an object's ability to emit infrared energy. Different materials have different emissivities. For accurate readings, adjust the emissivity setting on your thermometer to match the material being measured. Common emissivity values:

• 0.95 (default for many devices): Most organic materials, painted surfaces, water, plastic.
• ५५१०३-१: Concrete, brick, rough wood.
• ५५१०३-१: Polished metals (can vary significantly).

Consult an emissivity table for specific materials. Incorrect emissivity settings will lead to inaccurate temperature readings.

6. देखभाल

6.1 स्वच्छता

To ensure optimal performance and longevity, keep the device clean.

• Wipe the device exterior with a clean, damp कापड अपघर्षक क्लीनर किंवा सॉल्व्हेंट्स वापरू नका.
• Carefully clean the infrared lens with a soft, lint-free cloth or a lens cleaning wipe. Avoid scratching the lens.

6.2 बॅटरी बदलणे

When the battery indicator on the display shows low power, replace the batteries promptly to avoid interruption of operation. Follow the battery installation steps in Section 4.1.

५.८.१ स्टोरेज

Store the thermometer in a dry, dust-free environment within the recommended temperature range (refer to specifications). If storing for extended periods, remove the batteries to prevent leakage.

7. समस्या निवारण

If you encounter issues with your Testo 830-T1, refer to the following common problems and solutions:

• डिव्हाइस चालू होत नाही:
  • Check if batteries are correctly inserted with proper polarity.
  • बॅटरी नवीनसह बदला.
• चुकीचे वाचन:
  • Ensure the infrared lens is clean.
  • Verify the emissivity setting matches the target material.
  • Ensure the measurement distance is appropriate for the target size (12:1 optics).
  • काचेतून किंवा जास्त परावर्तित होणाऱ्या पृष्ठभागावरून मोजमाप टाळा.
• लेसर दिसत नाही:
  • बॅटरी पातळी तपासा.
  • Ensure the measurement trigger is pressed.

If problems persist, contact Testo customer support for assistance.

8. तपशील

9. हमी आणि समर्थन

For warranty information, technical support, or service inquiries, please contact Testo SE & Co. directly. Details regarding specific warranty periods and terms are typically provided with the product packaging or on the manufacturer's official webसाइट

निर्माता: Testo SE & Co.

कृपया वॉरंटी दाव्यांसाठी तुमचा खरेदीचा पुरावा ठेवा.