Eiko H1155

Eiko H1155 H11 Series Halogen Replacement Bulb Instruction Manual

परिचय

This manual provides essential instructions for the safe and effective installation, operation, and maintenance of your Eiko H1155 H11 Series Halogen Replacement Bulb. Please read this manual thoroughly before installation and retain it for future reference.

सुरक्षितता माहिती

उत्पादन संपलेview

The Eiko H1155 is a high-performance H11 series halogen replacement bulb designed to meet or exceed original equipment specifications. It features a tungsten filament for bright, white light output.

Eiko H1155 H11 Series Halogen Replacement Bulb

आकृती 1: Eiko H1155 H11 Series Halogen Replacement Bulb. This image shows the clear glass bulb with its internal tungsten filament, mounted on a metal base with a red rubber seal and a black plastic connector.

सेटअप आणि स्थापना

  1. तयारी: Ensure the vehicle is parked on a level surface, the engine is off, and the parking brake is engaged. Disconnect the negative terminal of the vehicle's battery to prevent accidental electrical shorts.
  2. बल्बमध्ये प्रवेश करा: Locate the headlight assembly. Depending on your vehicle model, you may need to remove a cover, fender liner, or other components to access the rear of the headlight housing. Consult your vehicle's owner's manual for specific access instructions.
  3. वायरिंग डिस्कनेक्ट करा: जुन्या बल्बच्या मागच्या बाजूने असलेले इलेक्ट्रिकल कनेक्टर काळजीपूर्वक डिस्कनेक्ट करा.
  4. जुना बल्ब काढा: Unclip or twist the retaining mechanism that holds the old bulb in place. Gently pull the old bulb straight out from the housing.
  5. नवीन बल्ब बसवा: Wearing clean gloves or using a clean cloth, carefully insert the new Eiko H1155 bulb into the headlight housing. Ensure it is seated correctly and the retaining mechanism is secured. Do not touch the glass bulb with bare hands.
  6. वायरिंग पुन्हा कनेक्ट करा: नवीन बल्बला इलेक्ट्रिकल कनेक्टर पुन्हा जोडा.
  7. चाचणी कार्यक्षमता: Reconnect the vehicle's battery. Turn on the headlights to verify the new bulb is functioning correctly.
  8. पुन्हा एकत्र करणे: Reinstall any covers or components that were removed to access the bulb.

टीप: It is recommended to replace both headlamps simultaneously for consistent light output and performance, as bulbs dim over time.

ऑपरेशन

The Eiko H1155 Halogen Replacement Bulb operates as part of your vehicle's existing electrical system. Once properly installed, it will illuminate when the vehicle's headlight switch is activated. No special operational procedures are required beyond standard vehicle headlight usage.

देखभाल

समस्यानिवारण

समस्यासंभाव्य कारणउपाय
बल्ब पेटत नाही.Incorrect installation, loose connection, blown fuse, faulty wiring, or defective bulb.Check bulb seating and electrical connection. Inspect vehicle's fuse box for a blown headlight fuse. Consult a qualified mechanic if wiring is suspected. Replace bulb if defective.
Bulb is dim or flickers.Aging bulb, poor electrical connection, or voltage समस्या.Replace both bulbs for optimal performance. Check connections. Consult a mechanic for voltage समस्या.
बल्ब लवकर जळतो.खंडtage spikes, touching the glass during installation, or excessive vibration.Ensure proper installation without touching the glass. Have vehicle's electrical system checked for voltage अनियमितता.

तपशील

वैशिष्ट्यतपशील
ब्रँडइको
मॉडेल क्रमांकH1155
बल्ब प्रकारहॅलोजन
खंडtage12.8 Volts (Nominal), 13.2 Volts (Max)
वाटtage55 वॅट्स
चमक1345 लुमेन
Average Operating Life800 तास
बेस प्रकारRight-Angle Pre-Focus H11
बल्ब आकारT3-1/4
आयटम वजन0.8 औंस
UPC031293811646

हमी आणि समर्थन

For warranty information or technical support regarding your Eiko H1155 Halogen Replacement Bulb, please refer to the manufacturer's official website or contact Eiko customer service directly. Keep your purchase receipt as proof of purchase.

Manufacturer: EIkO Auto Lighting

संबंधित कागदपत्रे - H1155

प्रीview EIKO LED T8 लिनियर ट्यूब इंस्टॉलेशन सूचना
EIKO LED T8 टाइप B लिनियर ट्यूब लाईट्ससाठी सर्वसमावेशक इंस्टॉलेशन सूचना, ज्यामध्ये सुरक्षा खबरदारी, देखभाल आणि फ्लोरोसेंट ल्युमिनेअर्स रेट्रोफिटिंगसाठी तपशीलवार वायरिंग आकृत्या समाविष्ट आहेत.
प्रीview EIKO VL1 मालिका LED व्हॉल्यूमेट्रिक ट्रॉफर इंस्टॉलेशन सूचना
EIKO VL1 सिरीज LED व्हॉल्यूमेट्रिक ट्रॉफरसाठी व्यापक स्थापना मार्गदर्शक, ज्यामध्ये समाविष्ट आहेview, सुरक्षा खबरदारी, स्थापना चरणे, वायरिंग स्कीमॅटिक्स आणि सेन्सर स्थापना. पॉवर आणि सीसीटी निवड समाविष्ट आहे.
प्रीview फोटोसेल इंस्टॉलेशन गाइडसह EIKO Z10 मायक्रोवेव्ह बाय-लेव्हल डिमिंग सेन्सर
फोटोसेलसह EIKO Z10 मायक्रोवेव्ह बाय-लेव्हल डिमिंग सेन्सरसाठी व्यापक स्थापना मार्गदर्शक, योग्य सेटअप आणि ऑपरेशनसाठी तपशीलवार तपशील, सेन्सर कव्हरेज आणि FCC अनुपालन माहिती.
प्रीview EIKO CSX1 मालिका LED कमर्शियल स्ट्रिप प्रीमियम इंस्टॉलेशन सूचना
EIKO CSX1 सिरीज LED कमर्शियल स्ट्रिप प्रीमियम फिक्स्चर, कव्हरिंग सरफेस माउंट, चेन माउंट आणि पर्यायी अॅक्सेसरी इंस्टॉलेशनसाठी व्यापक इंस्टॉलेशन मार्गदर्शक.
प्रीview EIKO LED सरफेस कॅनोपी स्क्वेअर इंस्टॉलेशन सूचना
या दस्तऐवजात EIKO LED सरफेस कॅनोपी स्क्वेअर फिक्स्चरसाठी तपशीलवार इंस्टॉलेशन सूचना प्रदान केल्या आहेत, ज्यामध्ये सुरक्षा खबरदारी, पृष्ठभाग माउंटिंग, साइड वायरिंग, पेंडेंट माउंटिंग, पॉवर अॅडजस्टमेंट आणि Z10 सेन्सर इंस्टॉलेशन यांचा समावेश आहे.
प्रीview EIKO SEN5A-ACT सेन्सर कमिशनिंग टूल: ऑपरेशन सूचना
EIKO SEN5A-ACT हँडहेल्ड सेन्सर कमिशनिंग टूलसाठी वापरकर्ता पुस्तिका. यात समाविष्ट आहेview, स्पेसिफिकेशन्स, प्रोग्राम कंपॅटिबिलिटी, बटण फंक्शन्स, पॅरामीटर सेटिंग्ज आणि SEN5A-ACT आणि SEN5A-CT प्रोग्राम्ससाठी वापर सूचना.