वायकिंग व्हीके-एम२डब्ल्यू पेजिंग Ampअधिक वापरकर्ता मॅन्युअल

परिचय

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Viking VK-M2W Paging Amplifier. Please read this manual thoroughly before using the device to ensure proper functionality and safety.

The Viking VK-M2W is designed to amplify audio signals for paging systems, offering adjustable volume control and compatibility with multiple speakers. It is a robust solution for various audio ampliification गरजा.

महत्वाची सुरक्षितता माहिती

• Always disconnect power before making any connections or performing maintenance.
• भोवती योग्य वायुवीजन सुनिश्चित करा ampओव्हरहाटिंग टाळण्यासाठी लिफायर.
• डिव्हाइसला ओलावा किंवा अति तापमानात उघड करू नका.
• Use only the power supply provided or a compatible power supply with the correct voltagई आणि वर्तमान रेटिंग.
• सर्व सेवांचा संदर्भ पात्र सेवा कर्मचाऱ्यांना द्या.

पॅकेज सामग्री

पॅकेजमध्ये सर्व वस्तू आहेत का ते तपासा:

• वायकिंग व्हीके-एम२डब्ल्यू पेजिंग Ampलाइफायर युनिट
• वीज पुरवठा
• One Weather Resistant 25AE Paging Horn (if included in your specific package)
• हे वापरकर्ता मॅन्युअल

उत्पादन वैशिष्ट्ये

• Adjustable volume control for precise audio output.
• Capable of powering up to three 8 ohm speakers.
• Equipped with secure screw terminal connections for reliable wiring.
• Includes a dedicated power supply for immediate use.
• Designed for compatibility with optional additional 25AE paging horns or 30AE ceiling speakers.

सेटअप आणि स्थापना

Follow these steps to properly install and connect your VK-M2W Paging Ampलाइफायर

Figure 1: Front Panel of the Viking VK-M2W Paging Ampलाइफायर

The image displays the front panel of the Viking VK-M2W Paging Amplifier. At the top, 'VOLUME' is indicated. Below it, the brand 'VIKING' and product name 'PAGING AMP MODEL M2W' are visible, along with 'VIKING ELECTRONICS HUDSON, WI 54016'. A red LED labeled 'POWER' is in the center. At the bottom, screw terminal connections are labeled 'SPEAKER OUT', 'AUDIO IN', and '13.8 VAC', with numbered terminals 1 through 6. Terminals 5 and 6 are marked with '+' and '-' respectively.

Connection Diagram and Terminal Descriptions:

Refer to Figure 1 for the location of each terminal.

• Terminals 1 & 2 (13.8 VAC): Connect the included 13.8 VAC power supply to these terminals. Ensure correct polarity if specified by the power supply, though these terminals are typically AC input.
• Terminals 3 & 4 (AUDIO IN): Connect your audio source (e.g., a music player, microphone pre-amp, or phone system audio output) to these terminals. This is the input for the audio signal to be ampखोटे
• Terminals 5 & 6 (SPEAKER OUT): Connect your 8 ohm speakers to these terminals. Terminal 5 is the positive (+) output, and Terminal 6 is the negative (-) output. The amplifier can power up to three 8 ohm speakers. Ensure correct polarity for optimal sound quality.

स्थापना चरण:

1. माउंटिंग: साठी योग्य जागा निवडा amplifier, ensuring adequate ventilation and protection from moisture. The unit can be mounted using screws through the mounting tabs (if present, not visible in image, but common for such devices).
2. स्पीकर कनेक्शन: Wire your 8 ohm speakers to the SPEAKER OUT terminals (5 and 6), observing polarity (+ to 5, - to 6). You can connect up to three 8 ohm speakers.
3. ऑडिओ इनपुट कनेक्शन: Connect your audio source to the AUDIO IN terminals (3 and 4).
4. वीज कनेक्शन: Connect the 13.8 VAC power supply to the 13.8 VAC terminals (1 and 2).
5. प्रारंभिक पॉवर अप: Once all connections are secure, plug the power supply into a wall outlet. The POWER LED (red dot) on the ampलिफायर प्रकाशित झाला पाहिजे.

ऑपरेशन

The VK-M2W Paging Amplifier is designed for straightforward operation.

• पॉवर इंडिकेटर: The red LED labeled "POWER" will illuminate when the unit is receiving power.
• आवाज नियंत्रण: The "VOLUME" knob, located at the top of the unit (as seen in Figure 1), allows you to adjust the output level of the amplified audio. Turn clockwise to increase volume and counter-clockwise to decrease volume.
• ऑडिओ प्लेबॅक: Once powered and connected to an audio source and speakers, the amplifier will output the incoming audio signal through the connected speakers. Adjust the volume to your desired listening level.

समस्यानिवारण

तपशील

देखभाल

The Viking VK-M2W Paging Ampदीर्घकालीन कामगिरी सुनिश्चित करण्यासाठी लाइफायरला कमीत कमी देखभालीची आवश्यकता असते.

• स्वच्छता: युनिटच्या बाहेरील भाग स्वच्छ करण्यासाठी मऊ, कोरडे कापड वापरा. ​​द्रव क्लीनर किंवा एरोसोल वापरू नका.
• वायुवीजन: Ensure that the ventilation openings (if any) are not blocked to prevent overheating.
• स्टोरेज: जर युनिट जास्त काळ साठवत असाल तर ते वीज बंद करा आणि थंड, कोरड्या जागी ठेवा.

हमी आणि समर्थन

For warranty information or technical support, please refer to the documentation provided with your purchase or contact Viking Electronics directly. Keep your purchase receipt as proof of purchase.

निर्माता: व्हायकिंग इलेक्ट्रॉनिक्स