1. परिचय
This manual provides essential instructions for the safe and effective use, assembly, maintenance, and troubleshooting of your Nova Ortho-Med 5000 Series Wheelchair. Please read this manual thoroughly before using the wheelchair to ensure proper operation and user safety. Keep this manual for future reference.
1.1 सुरक्षितता माहिती
- Always engage wheel locks before transferring in or out of the wheelchair.
- Ensure all components are securely fastened before each use.
- कमाल वजन क्षमता 275 lbs पेक्षा जास्त करू नका.
- Avoid sudden movements or leaning excessively, which could cause tipping.
- Regularly inspect tires, brakes, and frame for wear or damage.
2. घटक संपलेview
Familiarize yourself with the main parts of your Nova Ortho-Med 5000 Series Wheelchair.
Image 1: Nova Ortho-Med 5000 Series Wheelchair. This image displays the full wheelchair from a slight angle, showing the black seat and backrest, chrome frame, large rear wheels, smaller front casters, and adjustable footrests.
- फ्रेम: The main structure, typically chrome-plated steel.
- सीट आणि बॅकरेस्ट: Black nylon upholstery for user comfort.
- आर्मरेस्ट: Padded for support, often removable or flip-back.
- मागील चाके: Large wheels with handrims for self-propulsion, equipped with wheel locks.
- फ्रंट कॅस्टर: Smaller swivel wheels for steering and maneuverability.
- Footrests/Legrests: Adjustable and removable for user comfort and transfers.
- चाकांचे कुलूप: Levers located near the rear wheels to secure the wheelchair in place.
१. सेटअप आणि असेंब्ली
३.२ व्हीलचेअर उघडणे
- Place the folded wheelchair on a flat, stable surface.
- हँडग्रिपचा वरचा भाग पकडा आणि त्यांना हळूवारपणे वेगळे करा.
- Push down on the seat rails until the seat is fully open and flat. Ensure the cross braces are fully extended.
3.2 Attaching Footrests/Legrests
- Align the footrest attachment pins with the receptacles on the front of the wheelchair frame.
- Swing the footrest outward slightly, insert the pins, and then swing the footrest inward until it locks into place.
- Adjust the height of the footplates so the user's feet are comfortably supported and knees are at approximately a 90-degree angle. Use the adjustment lever or pin to secure the desired height.
3.3 Adjusting Hemi Seat Height (Dual Axle Design)
The dual axle design allows for easy conversion to hemi seat height. This adjustment lowers the seat for users who propel with their feet.
- Remove the rear wheels by depressing the quick-release button on the axle and pulling the wheel off.
- Relocate the axle to the lower set of holes on the frame.
- Reattach the rear wheels, ensuring they are securely locked.
- Adjust the front casters if necessary to maintain proper ground clearance and stability.
४. व्हीलचेअर चालवणे
4.1 Engaging and Disengaging Wheel Locks
- To engage: Push the wheel lock levers forward until they click into place, securing the rear wheels.
- To disengage: Pull the wheel lock levers backward to release the rear wheels.
- Always engage both wheel locks when transferring or when the wheelchair is stationary.
4.2 Self-Propulsion
To move the wheelchair, grasp the handrims on the rear wheels and push forward or backward. Use both hands for smooth, controlled movement.
4.3 Assisted Propulsion
When assisting a user, push the wheelchair by the handgrips located on the back of the chair. Be mindful of obstacles and uneven terrain.
4.4 Folding for Storage/Transport
- Ensure footrests are removed or swung out of the way.
- Grasp the center of the seat upholstery (front and back) and pull upwards. The wheelchair will begin to fold inward.
- Continue pulling until the wheelchair is fully folded.
5. देखभाल आणि काळजी
5.1 स्वच्छता
- जाहिरातीने फ्रेम पुसून टाकाamp कापड आणि सौम्य साबणाने चांगले वाळवा.
- Clean upholstery with a mild detergent and water. Allow to air dry completely.
- Avoid abrasive cleaners or solvents that could damage the finish or materials.
5.2 नियमित तपासणी
Perform the following checks monthly or as needed:
- टायर: Check for wear, cracks, or punctures. Ensure proper inflation if pneumatic.
- चाकांचे कुलूप: Verify they engage securely and hold the wheels firmly. Adjust if necessary.
- फास्टनर्स: Inspect all nuts, bolts, and screws for tightness. Tighten any loose fasteners.
- फ्रेम: Look for any signs of cracks, bends, or corrosion.
- असबाब: Check for tears or excessive wear.
5.3 स्नेहन
Apply a small amount of silicone-based lubricant to moving parts such as axle pins, caster stems, and folding mechanisms periodically to ensure smooth operation.
6. समस्या निवारण
| समस्या | संभाव्य कारण | उपाय |
|---|---|---|
| Wheel locks do not hold | Misalignment or wear | Adjust the wheel lock mechanism or replace worn parts. Ensure tires are properly inflated. |
| व्हीलचेअर एका बाजूला खेचते | Uneven tire pressure, bent frame, or loose caster | Check tire pressure. Inspect frame for damage. Tighten caster bolts. |
| Difficulty folding/unfolding | Obstruction or lack of lubrication | Check for obstructions. Lubricate folding mechanisms. |
| किंचाळणारे आवाज | Lack of lubrication or loose components | Lubricate moving parts. Tighten all fasteners. |
7. तपशील
- मॉडेल: Nova Ortho-Med 5000 Series
- वजन क्षमता: ५५ पौंड
- फ्रेम वजन: ५५ पौंड
- Width (Open): १.७५"
- Width (Closed): १.७५"
- आसन खोली: १.७५"
- साहित्य: Steel frame, Nylon upholstery
- रंग: काळा
- वैशिष्ट्ये: Dual axle for hemi-height conversion, offset arms, industry-compatible footrests.
8. हमी आणि समर्थन
For specific warranty information regarding your Nova Ortho-Med 5000 Series Wheelchair, please refer to the documentation included with your purchase or contact Nova customer support directly. General product support and service inquiries can also be directed to the manufacturer.
निर्माता: Nova Ortho-Med, Inc.
Please note: Warranty terms and conditions may vary. Always consult the official warranty statement.
