हेला एच४ १३०/९० डब्ल्यू १२ व्ही हाय वॅटtagई हॅलोजन बल्ब सूचना पुस्तिका

1. उत्पादन संपलेview

The HELLA H4 130/90W 12V High Wattage Halogen Bulb is engineered for demanding lighting applications. This bulb is designed to provide enhanced visibility, particularly in challenging conditions encountered during off-road use or in environments requiring superior light output. HELLA bulbs undergo rigorous quality testing to ensure optimal performance and reliability.

हे उत्पादन हेतू आहे off-road use only. Its higher wattage compared to standard bulbs may exceed legal limits for on-road vehicles in certain regions and can potentially affect vehicle wiring systems.

Figure 1: HELLA H4 130/90W Halogen Bulb in its retail packaging.

2. सुरक्षितता माहिती

चेतावणी: All bulbs with higher wattage than standard may damage or overheat a headlight wiring system. HELLA’s warranty does not cover damaged headlights resulting from the use of high wattage bulbs. HELLA’s warranty applies solely to bulb failure or lack of designed performance. Please use high wattage bulbs at your own risk.

• Ensure the vehicle's electrical system can safely support the higher wattage of this bulb. Consult a qualified automotive technician if unsure.
• Always wear protective gloves and eyewear during installation to prevent injury and avoid touching the glass part of the bulb, as oils from your skin can reduce bulb life.
• Disconnect the vehicle's battery before attempting any electrical work.
• This bulb is for off-road use only. Check local regulations regarding headlight wattage for on-road vehicles.

२. बॉक्समध्ये काय आहे?

प्रत्येक पॅकेजमध्ये असे आहेः

• 1 x HELLA H4 130/90W 12V Halogen Bulb

4. स्थापना सूचना

Replacing a headlight bulb typically involves the following general steps. Always refer to your vehicle's specific service manual for detailed instructions, as procedures may vary significantly between vehicle models.

1. तयारी: Ensure the vehicle is turned off and the engine is cool. Disconnect the negative terminal of the vehicle's battery.
2. हेडलाइट असेंब्लीमध्ये प्रवेश करा: Depending on your vehicle, you may need to open the hood and access the back of the headlight assembly. Some vehicles may require removing parts like the battery, air filter housing, or even the entire headlight assembly for easier access.
3. Remove the Electrical Connector: जुन्या बल्बच्या मागच्या बाजूने असलेले इलेक्ट्रिकल कनेक्टर काळजीपूर्वक डिस्कनेक्ट करा.
4. Remove the Dust Cover: Twist or pull off the rubber dust cover that protects the bulb and housing.
5. Release the Old Bulb: Unclip or unfasten the retaining spring or clip that holds the bulb in place. Carefully pull the old bulb straight out from its socket.
6. नवीन बल्ब स्थापित करा: Holding the new HELLA H4 bulb by its base (avoid touching the glass), align the tabs on the bulb with the notches in the headlight housing. Insert the bulb firmly into place.
7. बल्ब सुरक्षित करा: Re-engage the retaining spring or clip to hold the new bulb securely.
8. Replace Dust Cover and Connector: Reinstall the rubber dust cover, ensuring a tight seal. Reconnect the electrical connector to the new bulb.
9. अंतिम टप्पे: Reconnect the vehicle's battery. Test the headlights (low beam and high beam) to ensure proper function and alignment.

आकृती 2: क्लोज-अप view of the HELLA H4 130/90W Halogen Bulb, showing its base and filaments.

Figure 3: Technical drawing illustrating the dimensions of the H4 bulb (17mm diameter, 60mm length, 32mm base height).

5. ऑपरेटिंग सूचना

Once installed, the HELLA H4 130/90W bulb operates like any standard headlight bulb. Use your vehicle's existing headlight switch to activate low beam and high beam functions. Ensure proper aiming of your headlights after installation to maximize visibility and avoid dazzling other drivers.

6. देखभाल

• स्वच्छता: Keep headlight lenses clean for optimal light output. Use a soft cloth and appropriate automotive glass cleaner.
• तपासणी: Periodically check your headlights for proper function (low beam, high beam).
• बदली: Halogen bulbs have a finite lifespan. Replace bulbs in pairs to ensure consistent light output and color temperature.
• हाताळणी: When replacing, avoid touching the glass of the new bulb. If touched, clean with rubbing alcohol and a lint-free cloth before installation.

7. समस्या निवारण

बल्ब उजळत नाही

• कनेक्शन तपासा: इलेक्ट्रिकल कनेक्टर बल्बला सुरक्षितपणे जोडलेला आहे याची खात्री करा.
• फ्यूज तपासा: Inspect the vehicle's fuse box for a blown headlight fuse. Replace if necessary with a fuse of the correct ampवय.
• वायरिंगची तपासणी करा: Look for any visible damage or corrosion in the wiring leading to the headlight.
• चाचणी बल्ब: If possible, test the bulb in another working socket or test the socket with a known good bulb.

मंद किंवा फ्लिकरिंग लाइट

• खंड तपासाtage: A weak or flickering light might indicate an issue with the vehicle's electrical system or a dying bulb.
• गंज: Inspect electrical contacts for corrosion and clean if necessary.

If issues persist after basic troubleshooting, consult a professional automotive technician.

8. तपशील

८. उत्पादन व्हिडिओ

10. हमी आणि समर्थन

HELLA’s warranty applies to bulb failure or lack of designed performance under normal operating conditions. It कव्हर करत नाही damaged headlights resulting from the use of high wattage bulbs that may cause overheating or damage to the vehicle's electrical system. Users assume responsibility for potential vehicle modifications or risks associated with installing higher wattagई बल्ब.

For further support or warranty claims, please refer to the official Hella website or contact their customer service directly. Contact information can typically be found on the product packaging or the official Hella brand webसाइट