APEX प्रगत सिंथेटिक डायमंड टेस्टर सूचना पुस्तिका
APEX प्रगत सिंथेटिक डायमंड टेस्टर सूचना पुस्तिका

Thank you for your purchase of the GemTrue APEX DK10300 Developed for excellence in synthetic diamond testing.
It is important that you read this user guide to gain a good understanding of this device and how it should be used to obtain accurate test results.

  1. Press and hold the power button until it beeps, then release.
    स्थापना मार्गदर्शक
  2. Wait for calibration to complete.
    स्थापना मार्गदर्शक
  3. Please remove the cap and wait.
    स्थापना मार्गदर्शक
  4. Choose the test option.
    स्थापना मार्गदर्शक
  5. Always make sure to hold the metal touch areas during testing for accurate results.
    स्थापना मार्गदर्शक
  6. Hold tester and Jewellery at 90 degrees to one another.
    स्थापना मार्गदर्शक
  7. Press the probe firmly at 90 degrees onto the stone’s table facet to start the test.
    स्थापना मार्गदर्शक
  8. Do not move or release. Wait for result.
    स्थापना मार्गदर्शक
  9. Test result will appear on the screen.
    स्थापना मार्गदर्शक
  10. Place loose stone on the plate. Press the probe firmly at a 90-degree onto the stone’s table facet
    स्थापना मार्गदर्शक
  11. Select test again or return to main menu.
    स्थापना मार्गदर्शक
  12. To turn off the device, press the shut down option.
    स्थापना मार्गदर्शक
  13. Always replace the cap when you are not using the device
    स्थापना मार्गदर्शक
  14. Insert the Type-C cable with a 5V / minimum 0.5A charger to recharge the device.
    स्थापना मार्गदर्शक
  15. When plugged in, the power light is red, it turns green when fully charged.
    स्थापना मार्गदर्शक

महत्त्वाच्या सूचना

A. Battery Usage
Charge the tester fully before use. Low battery may affect accuracy. Recharge when the battery icon reaches the last red bar. Avoid using the tester while charging to prevent reducing battery life.
बी. चार्जिंग
Use the provided USB-C cable for optimal charging.
The front power light turns red when charging and green when fully charged.
Required charger: DC 5V/ Minimum 0.5A (does not support PD fast charging).
C. Retesting
Wait for the result to clear before retesting.
Allow stones to cool between tests to prevent heat buildup, which may affect results.
D. Testing Stones
This tester is designed for testing CVD/HPHT/Type Ila, Moissanite, Natural Diamond, Simulant, and Cubic Zirconia (CZ).
E. Stone Colour Range
Optimized for polished stones with D to M color range. Stones outside this range or unpolished stones may yield inaccurate results.
F. Stone Cut and Size
Designed for round brilliant-cut stones.
Minimum testing size: 0.2ct.
Fancy-shaped stones may cause inaccurate results.
G. Care Instructions
Clean the tester’s tip gently with the included polishing cloth if unused for several days.
Clean stones with a dry tissue before testing to remove dust or oils.
H. Professional Consultation
If the tester provides unexpected results, consult a qualified gemologist or gemological association for further assessment.

This Tester is Fully Patented
यूएस पेटंट: 12,235,212 / 12,130,238/11,243,170/11,073,482 / 10,539,010/8,947
111/10,203,317/10,203,288/9,453,808
China Patents: 202222990840X / 202210427519.2
हाँगकाँग: HK40076121 EU: EP3032242B1

IMPORTANT SAFETY AND OPERATING GUIDELINES

UV Safety Warning
This device emits UV light briefly during testing. Avoid direct eye exposure to the probe sensor. When used as instructed, the UV light is safe and poses no harm to eyes or skin. Always follow safety guidelines for proper use.

रिचार्ज करण्यायोग्य बॅटरी चेतावणी
Charge the device only with the specified charger (DC 5V/Minimum 0.5A).
Do not overcharge or leave it plugged in after it is fully charged.
बॅटरीला अत्यंत तापमानात किंवा थेट सूर्यप्रकाशात उघड करणे टाळा.
For safe disposal, follow local recycling guidelines for rechargeable batteries.

ऑपरेटिंग अटी
ऑपरेटिंग तापमान: 10°C ते 35°C (50°F ते 95°F)
साठवण तपमान: 20 डिग्री सेल्सियस ते 25 डिग्री सेल्सियस (68 ° फॅ ते 77 ° फॅ)
Air Humidity: 15% to 70%

GEMTRUE WARRANTY TERMS AND CONDITIONS
The Gem True” APEX comes with a 24-month warranty from the date of purchase, provided the device is used as instructed in this user guide.
The warranty covers only manufacturing defects. Battery warranty is valid for 6 months due to its consumable nature.

वॉरंटी अपवर्जन:
The warranty is void if the device has been disassembled, tampered with, or subjected to misuse.

दायित्वाची मर्यादा:

  • GemTrue® is not liable for any direct or indirect damages resulting from the use of this tester.
  • The device is sold “as is” with no additional warranties, except as required by applicable law.
  • GemTrue® reserves the right to modify these terms at any time.

GEMTRUE Logo

कागदपत्रे / संसाधने

एपेक्स एपेक्स प्रगत सिंथेटिक डायमंड टेस्टर [pdf] सूचना पुस्तिका
क्विकटेस्ट, एपेक्स अॅडव्हान्स्ड सिंथेटिक डायमंड टेस्टर, एपेक्स, अॅडव्हान्स्ड सिंथेटिक डायमंड टेस्टर, सिंथेटिक डायमंड टेस्टर, डायमंड टेस्टर

संदर्भ

एक टिप्पणी द्या

तुमचा ईमेल पत्ता प्रकाशित केला जाणार नाही. आवश्यक फील्ड चिन्हांकित आहेत *