1. परिचय
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your BYD 7kW EV Charging Station, Model EVA007KG/A2. This wall-mounted AC charging station is designed to provide reliable charging for electric vehicles compatible with the GB/T charging standard.
2. सुरक्षितता माहिती
Please read and understand all safety instructions before installing or operating the charging station. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- सर्व स्थानिक आणि राष्ट्रीय विद्युत संहितांनुसार प्रतिष्ठापन पात्र इलेक्ट्रिशियनद्वारे केले पाहिजे.
- Do not attempt to open, disassemble, repair, or modify the charging station.
- Do not use the charging station if it is damaged, cracked, or shows any signs of malfunction.
- Keep children away from the charging station during operation.
- Ensure the charging cable is not damaged, kinked, or run over by vehicles.
- Always ensure proper grounding of the charging station.
- In case of emergency, press the emergency stop button (if present) and disconnect power at the circuit breaker.
3. सेटअप आणि स्थापना
The BYD EVA007KG/A2 is a self-contained, wall-mounted charging station. Professional installation is highly recommended.
3.1 अनपॅक करणे
Carefully remove the charging station from its packaging. Inspect for any visible damage. Retain packaging for future transport or storage.
3.2 माउंटिंग
Choose a suitable location for wall mounting, ensuring it is within reach of your vehicle's charging port and a dedicated electrical circuit. The unit is suitable for both indoor and outdoor use (IP55 rated enclosure).
- Mark the drilling points on the wall using the charging station as a template.
- छिद्रे पाडा आणि योग्य भिंतीवरील अँकर घाला.
- Secure the charging station to the wall using suitable screws.
3.3 इलेक्ट्रिकल कनेक्शन
This charging station requires a 220V AC input with a rated current of 32A. A dedicated circuit with appropriate overcurrent protection (circuit breaker) is mandatory.
- कोणतेही विद्युत कनेक्शन करण्यापूर्वी मुख्य वीजपुरवठा बंद असल्याची खात्री करा.
- Connect the input power cable to the designated terminals inside the charging station.
- Ensure proper grounding is established.
- Verify all connections are secure and correctly wired according to local electrical codes.
The charging gun is rated 32A 250V AC and conforms to GB/T 2023.4-2015 standard with an IP67 rating.
4. ऑपरेटिंग सूचना
Follow these steps to charge your electric vehicle:
- Ensure the charging station is powered on (green light steady on).
- Take the charging gun and insert it firmly into your vehicle's charging port.
- The charging station will initiate communication with the vehicle.
- Once communication is established and charging begins, the green indicator light will flash rapidly.
- Monitor the charging process via the indicator lights on the station and your vehicle's dashboard.
- To stop charging, unlock the charging gun from your vehicle (usually via your vehicle's controls or by pressing the button on the charging gun if available) and then pull it out.
- Return the charging gun to its holder on the station.
4.1 निर्देशक दिवे
The charging station features indicator lights to show its status:
| सूचक प्रकाश | स्थिती |
|---|---|
| हिरवा दिवा स्थिर | Powered on / Standby |
| Green light fast flash | चार्ज होत आहे |
| हिरवा दिवा मंद फ्लॅश | पूर्ण चार्ज |
| लाल दिवा स्थिर | दोष |
| Red and green lights alternate flash | Load disconnected / Charging gun unplugged |
| Red light flashes 3 times in 1 second | Ground wire disconnected before charging |
5. देखभाल
Regular maintenance ensures the longevity and safe operation of your charging station.
- स्वच्छता: Wipe the exterior of the charging station with a soft, damp cloth. Do not use abrasive cleaners or solvents. Ensure the charging port and gun are free of dust and debris.
- तपासणी: Periodically inspect the charging cable and connector for any signs of wear, damage, or corrosion. Check the housing of the charging station for cracks or damage.
- पर्यावरणीय परिस्थिती: ऑपरेटिंग वातावरण निर्दिष्ट तापमान आणि आर्द्रता श्रेणींमध्ये असल्याची खात्री करा.
- व्यावसायिक तपासणी: It is recommended to have a qualified electrician inspect the charging station and its electrical connections annually.
6. समस्या निवारण
Refer to the indicator lights section for initial diagnosis. If an issue persists, contact customer support.
| समस्या | संभाव्य कारण | उपाय |
|---|---|---|
| No power (no lights) | No power supply, circuit breaker tripped | Check circuit breaker, ensure power is supplied to the unit. |
| लाल दिवा स्थिर | अंतर्गत दोष | Disconnect power, wait 5 minutes, reconnect. If fault persists, contact support. |
| लाल दिवा 3 वेळा चमकतो | Ground wire issue | Ensure proper grounding. Consult an electrician. |
| चार्जिंग सुरू होत नाहीये | Charging gun not fully inserted, vehicle not ready to charge, communication error | Re-insert charging gun firmly. Check vehicle's charging status. Restart charging station. |
7. तपशील
Key technical specifications for the BYD EVA007KG/A2 EV Charging Station:
| विशेषता | मूल्य |
|---|---|
| मॉडेल क्रमांक | EVA007KG/A2 |
| ब्रँड नाव | बीवायडी |
| मूळ स्थान | चोंगकिंग, चीन |
| स्थापना पद्धत | Self-contained (Wall-mounted) |
| इंटरफेस मानक | GB/T 2023.4-2015 |
| आउटपुट वर्तमान | AC |
| आउटपुट पॉवर | 7kW |
| इनपुट व्हॉल्यूमtage | 220V |
| रेट केलेले वर्तमान | 32A |
| Protection Level (Enclosure) | IP55 |
| Protection Level (Connector) | IP67 |
| वजन | 4.0 किलो |
| वापर पर्यावरण | इनडोअर किंवा आउटडोअर |
| अंमलबजावणी मानक | GB/T 18487.1-2015 |
8. हमी आणि समर्थन
वॉरंटी माहिती, तांत्रिक समर्थन किंवा सेवा चौकशीसाठी, कृपया विक्रेत्याशी किंवा उत्पादकाशी थेट संपर्क साधा. खरेदीचा पुरावा म्हणून तुमची खरेदी पावती ठेवा.
१.६. वापरकर्ता टिपा
- Always ensure the charging gun is fully seated in the vehicle's port to prevent connection issues.
- Regularly check the charging cable for any signs of damage, especially if installed in an area where it might be exposed to vehicle traffic or harsh weather.
- If you experience frequent charging interruptions, verify your home's electrical system can consistently provide the required 32A at 220V.
