Herdio HCS628PRS 6.5-inch Recessed Ceiling Speaker Instruction Manual

परिचय

Thank you for choosing Herdio HCS628PRS 6.5-inch Recessed Ceiling Speakers. These two-way, full-range stereo speakers are designed to provide high-fidelity audio for various indoor and enclosed outdoor spaces, including bedrooms, kitchens, offices, shops, classrooms, and covered porches. Their flush-mount design allows for seamless integration into your environment. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance.

सुरक्षितता माहिती

• Always ensure power is disconnected from the amplifier or audio system before making any connections.
• Do not expose speakers to direct water or extreme moisture. While moisture-resistant, they are not waterproof.
• Ensure proper wire gauge is used for speaker connections to prevent overheating and signal loss.
• When cutting holes for installation, be aware of electrical wiring, plumbing, or other obstructions behind the ceiling or wall.
• Seek professional assistance if you are unsure about any installation steps.

पॅकेज सामग्री

तुमच्या पॅकेजमध्ये सर्व वस्तू आहेत का ते तपासा:

• 6.5-inch Ceiling Speakers (x2)
• Speaker Connection Wires (x2)
• वापरकर्ता मॅन्युअल (x1)
• Cutout Template (x1)
• Gaskets (x2)

तपशील

स्थापना

These speakers are designed for flush mounting in ceilings or walls. An external amplifier is required to power these passive speakers (not included).

३. नियोजन आणि तयारी

• स्थान निवडा: Select a suitable location in your ceiling or wall, ensuring there are no obstructions (e.g., studs, joists, electrical wires, pipes) behind the mounting surface.
• वीज बंद: Turn off power to the area where you will be installing the speakers.
• साधने गोळा करा: You will need a drill, drywall saw (or similar cutting tool), wire strippers, and a screwdriver.

2. Creating the Cutout

• Use the provided cutout template to mark the exact cutting area on your ceiling or wall.
• Carefully cut along the marked line using a drywall saw. Ensure the hole is clean and precise for a snug fit.

२. स्पीकर्सना वायरिंग करणे

The speakers require connection to an amplifier. Use the provided speaker cables or appropriate gauge speaker wire for your setup.

• तुमच्याकडून स्पीकर वायर चालवा amplifier to each speaker cutout. Leave enough slack for easy connection.
• Strip approximately 1/2 inch (1.2 cm) of insulation from the ends of the speaker wires.
• Connect the speaker wires to the terminals on the back of the speaker. The red wire connects to the positive (+) terminal, and the black wire connects to the negative (-) terminal. Ensure a secure connection.

४. स्पीकर्स बसवणे

• Carefully insert the speaker into the cutout.
• The speaker features spring-loaded mounting buckles. Break the left and right mounting buckles up and snap them into the ceiling/wall. These will secure the speaker in place.
• Ensure the speaker is flush with the surface and securely fastened.
• स्पीकरला चुंबकीय लोखंडी जाळी जोडा.

For a visual guide, please refer to the installation section in the provided video.

ऑपरेशन

Once the speakers are securely installed and wired to your ampजीवनदायी:

• Connect your audio source (e.g., receiver, media player) to the ampलाइफायर
• चालू करा तुमचे ampलाइफायर आणि ऑडिओ स्रोत.
• तुमच्या वर आवाज आणि ऑडिओ सेटिंग्ज समायोजित करा amplifier to your desired listening level.

These are passive speakers, meaning they do not have built-in amplification and must be connected to an external ampलिफायर किंवा प्राप्तकर्ता.

देखभाल

• स्वच्छता: Use a soft, dry cloth to clean the speaker grilles and surrounding areas. Do not use harsh chemicals or abrasive cleaners.
• ओलावा: While moisture-resistant, avoid direct exposure to water. If used in a bathroom or covered porch, ensure adequate ventilation and protection from splashes.
• तपासणी: Periodically check the speaker connections and mounting for any signs of loosening or damage.

समस्यानिवारण

आवाज नाही

• कनेक्शन तपासा: Ensure all speaker wires are securely connected to both the speakers and the amplifier, with correct polarity (+ to + and - to -).
• Ampअधिक शक्ती: सत्यापित करा की आपले ampलिफायर चालू आहे आणि योग्यरित्या कार्य करत आहे.
• स्रोत निवड: Confirm that the correct audio input source is selected on your ampलाइफायर
• आवाज पातळी: Check the volume levels on both your ampलाइफायर आणि ऑडिओ स्रोत.

विकृत आवाज

• Volume Too High: तुमच्यावरील आवाज कमी करा ampलाइफायर आणि ऑडिओ स्रोत.
• अयोग्य वायरिंग: Recheck speaker wire connections for correct polarity. Incorrect polarity can cause phase issues and distorted sound.
• Amplifier Overload: आपली खात्री करा amplifier's power output matches the speaker's power handling capabilities. An underpowered or overpowered amplifier can cause distortion.
• Damaged Speaker: If distortion persists, the speaker unit may be damaged.

एक स्पीकर काम करत नाही

• Swap Speakers: Temporarily swap the non-working speaker with a working one. If the issue moves with the speaker, the speaker itself may be faulty. If the issue stays with the channel, the wiring or amplifier channel may be the problem.
• वायरिंग तपासा: Inspect the wiring for the affected speaker for any breaks or loose connections.

वापरकर्त्याच्या टीपा

• Ampलाइफ मॅचिंग: For the best sound quality and to prevent damage, ensure your amplifier's impedance (8 Ohms) and power output (up to 150W per channel) are compatible with these speakers.
• स्पीकर प्लेसमेंट: For optimal stereo imaging, place speakers equidistant from the primary listening area. For wider sound dispersion in larger rooms, consider multiple pairs.
• वायर गुणवत्ता: Use high-quality speaker wire of appropriate gauge for your cable run length to minimize signal loss and ensure clear audio.
• Acoustic Seal: Ensure the speakers are securely mounted and the gaskets are properly seated to prevent air leaks, which can negatively impact bass response.

हमी आणि समर्थन

Herdio products are manufactured to high-quality standards. For any issues or technical support, please contact your retailer or the manufacturer directly. Keep your purchase receipt as proof of purchase for warranty claims.