परिचय
This manual provides comprehensive instructions for the Yovanxer AC114-1 RF433 Wireless Remote Control. This device is designed to operate automated curtains, specifically compatible with A-OK motors, using a reliable 433 MHz radio frequency signal. Please read this manual thoroughly before installation and operation to ensure proper use and longevity of your device.
तपशील
| वैशिष्ट्य | तपशील |
|---|---|
| उत्पादन ब्रँड | योव्हान्क्सर |
| मॉडेल क्रमांक | AC114-1 |
| वायरलेस कम्युनिकेशन | RF (रेडिओ वारंवारता) |
| वारंवारता | 433 MHz |
| प्रसारित वारंवारता | 433MHz |
| वापरा | Automated curtains |
| खंडtage | 3V |
| Supported Motor | All A-OK motors |
| नियंत्रणीय परिक्षेत्र | Up to 60 meters (indoor, through walls) |
| उत्पादनाचे वजन | 84 ग्रॅम |
| बॅटरी | Not included (Requires 2x AAA batteries) |
| पॅकेज | होय |
| Remote Dimensions (L x W) | 124.8 मिमी x 40 मिमी |
| मूळ | मुख्य भूप्रदेश चीन |
सेटअप
1. अनबॉक्सिंग आणि तपासणी
Carefully unpack the remote control and its accessories. Verify that all components are present and undamaged. The package should include the AC114-1 remote control and a wall-mount base.
2. बॅटरी इन्स्टॉलेशन
The AC114-1 remote control requires two AAA batteries (not included). To install:
- रिमोट कंट्रोलच्या मागील बाजूस बॅटरी कंपार्टमेंट शोधा.
- Slide open the rear cover.
- योग्य ध्रुवीयता (+/-) सुनिश्चित करून दोन AAA बॅटरी घाला.
- मागील कव्हर सुरक्षितपणे बंद करा.
3. Mounting the Remote (Optional)
The remote control comes with a wall-mount base for convenient storage. To mount:
- Choose a suitable location for the base, within easy reach.
- Use appropriate screws (not included) to secure the base to the wall.
- Slide the remote control into the base.
4. Pairing with A-OK Motor
To control your automated curtains, the remote control must be paired with your A-OK motor. The exact pairing procedure may vary slightly depending on your specific A-OK motor model. Generally, the process involves:
- Ensure your A-OK motor is powered on and in pairing mode (refer to your A-OK motor's instruction manual for specific steps to enter pairing mode).
- On the AC114-1 remote, locate the 'Settings key' (often a small button inside the battery compartment or on the back, as indicated in Figure 1).
- Press and hold the 'Settings key' on the remote control for a few seconds until the motor responds (e.g., jogs slightly, beeps, or indicates successful pairing).
- Test the remote control's functions (Up, Down, Stop) to confirm successful pairing.
ऑपरेटिंग सूचना
रिमोट कंट्रोल लेआउट
- चॅनल डिस्प्ले: Shows the currently selected control channel.
- Up Key (▲): Moves the curtain upwards (opens).
- Down Key (▼): Moves the curtain downwards (closes).
- Stop Key (●): Stops the curtain's movement.
- Left Click (◀): Used to switch to the previous control channel.
- Right Click (▶): Used to switch to the next control channel.
बेसिक ऑपरेशन
- चॅनल निवडा: Use the 'Left Click' or 'Right Click' buttons to select the desired channel for the curtain you wish to control. The 'Channel Display' will show the active channel.
- Open Curtain: Press the 'Up Key' (▲). The curtain will move upwards.
- Close Curtain: Press the 'Down Key' (▼). The curtain will move downwards.
- Stop Curtain: Press the 'Stop Key' (●) at any point to halt the curtain's movement.
देखभाल
साफसफाई
To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the surface or internal components.
बॅटरी बदलणे
When the remote control's range decreases or it becomes unresponsive, it's likely time to replace the batteries. Follow the 'Battery Installation' steps in the Setup section to replace the two AAA batteries. Always dispose of old batteries responsibly according to local regulations.
स्टोरेज
Store the remote control in a cool, dry place, away from direct sunlight and extreme temperatures. If not in use for an extended period, it is recommended to remove the batteries to prevent leakage.
समस्यानिवारण
| समस्या | संभाव्य कारण | उपाय |
|---|---|---|
| दूरस्थ प्रतिसाद देत नाही | मृत किंवा कमी बॅटरी Remote not paired with motor Obstruction between remote and motor | बॅटरी बदला Re-pair the remote with the motor (see Setup section) Ensure clear line of sight or reduce distance |
| लहान ऑपरेटिंग श्रेणी | कमी बॅटरी जास्त हस्तक्षेप Thick walls or metal structures | बॅटरी बदला इतर इलेक्ट्रॉनिक उपकरणांपासून दूर जा Reduce distance to motor |
| Curtain moves in wrong direction | Motor direction setting incorrect | Refer to your A-OK motor's manual for instructions on reversing motor direction. |
| Cannot switch channels | Remote is a single-channel model (if applicable) Buttons are stuck or damaged | Verify remote model. If single channel, it cannot switch. Gently clean around buttons. If damaged, contact support. |
वापरकर्त्याच्या टीपा
- For optimal performance, ensure the remote control is within the specified 60-meter range of the motor. While it can transmit through walls, heavy obstructions may reduce effective range.
- Keep the remote control away from moisture and direct heat sources to prevent damage.
- Consider using rechargeable AAA batteries for environmental friendliness and convenience.
हमी आणि समर्थन
For any issues not covered in this manual, or for technical support, please contact the seller or manufacturer directly. Keep your purchase receipt as proof of purchase for any warranty claims.
