1. परिचय
Thank you for choosing the JIGU Portable EV Charger Type 2. This manual provides essential information for the safe and efficient operation, installation, and maintenance of your electric vehicle charging device. Please read this manual thoroughly before using the product and keep it for future reference.
This portable EV charger is designed for convenient charging of electric and plug-in hybrid vehicles, offering both 7kW (1-phase) and 11kW (3-phase) power options with a 5-meter cable and CEE plug (EU standard).
Figure 1: JIGU Portable EV Charger Type 2 Overview
2. महत्वाची सुरक्षितता माहिती
Please observe the following safety precautions to prevent injury or damage to the product and your vehicle:
- Always ensure the charger is correctly connected to a suitable power source and your vehicle's charging port.
- Do not use the charger if the cable, plug, or charging gun is damaged.
- चार्जर उघडण्याचा, वेगळे करण्याचा किंवा बदलण्याचा प्रयत्न करू नका.
- Keep the charger away from water, moisture, and flammable materials. The device has an IP55 rating for protection against dust and low-pressure water jets, but it is not submersible.
- Ensure the current setting is adjusted आधी inserting the charger into the vehicle.
- The charger is equipped with multiple safety protections including overcurrent, overvoltage, undervoltage, leakage, overheat, short circuit, electrostatic, grounding detection, and lightning protection.
- मुले उपकरणाशी खेळत नाहीत याची खात्री करण्यासाठी त्यांचे पर्यवेक्षण केले पाहिजे.
Figure 2: Charger Display Functions and Protection Features
3. पॅकेज सामग्री
पॅकेजमध्ये सर्व वस्तू आहेत का ते तपासा:
- Portable Control Box (EV Charger Unit)
- CEE Plug (EU standard)
- 5-meter Charging Cable
- Charging Gun (Type 2 IEC62196-2 connector)
- स्टोरेज बॅग
- वापरकर्ता मॅन्युअल
आकृती ११: समाविष्ट घटक
4. तपशील
The JIGU Portable EV Charger is available in two main configurations:
4.1. 7.2KW 32A 1 Phase Model
| तपशील | मूल्य |
|---|---|
| प्लग | CEE Plug (EU) |
| चार्जिंग प्रकार | Type 2 IEC62196-2 |
| चालू | 8A/10A/13A/16A/28A/32A Adjustable |
| टप्पा | 1 टप्पा |
| शक्ती | 7.2KW |
| खंडtage | 110V-240V |
| केबल | 3G 6mm²+1*0.75mm² |
| संरक्षण पदवी | IP55 |
| ऑपरेटिंग तापमान | -20℃ ते +85℃ |
| केबलची लांबी | 5 मीटर |
| वजन | 3.0KG |
4.2. 11KW 16A 3 Phase Model
| तपशील | मूल्य |
|---|---|
| प्लग | CEE Plug (EU) |
| चार्जिंग प्रकार | Type 2 IEC62196-2 |
| चालू | 8A/10A/13A/16A Adjustable |
| टप्पा | 3 टप्पा |
| शक्ती | 11KW |
| खंडtage | 110V-240V / 380V-450V |
| केबल | 5G 2.5mm²+1*0.75mm² |
| संरक्षण पदवी | IP55 |
| ऑपरेटिंग तापमान | -20℃ ते +85℃ |
| केबलची लांबी | 5 मीटर |
| वजन | 3.0KG |
आकृती ८.१: तपशीलवार उत्पादन तपशील
4.3. General Specifications (Applicable to both models)
- Brand Name: JIGU
- Charger Type: Portable Charger
- Material: Copper alloy, silver plating
- Certificates: CE / RoHS
- Schedule Charging Time: 0-10 hours
- Dimensions (Control Box): Length 245mm, Width 215mm, Height 62mm
- पॅकेज वजन: 3.7 किलो
- Package Dimensions: Length 35cm, Width 35cm, Height 11cm
४. सेटअप सूचना
Follow these steps to set up your JIGU Portable EV Charger:
5.1. Choosing the Right Charger
Ensure you select the charger variant (7kW or 11kW) that is compatible with your vehicle's charging port and your electrical supply. Refer to your car's manual for its specific charging port type and phase requirements.
Figure 5: Charger Selection Guide
5.2. Power Socket Requirements
Ensure your electrical socket meets the necessary cable conductor cross-section and current-carrying capacity for safe operation. Using an inadequate socket can pose a fire hazard.
| Cable Conductor Cross-Section | Allowable Current-Carrying Capacity |
|---|---|
| 1 मिमी² | 8A |
| 1.5 मिमी² | 10A |
| 2.5 मिमी² | 13A/16A |
| 4 मिमी² | 28A |
| 6 मिमी² | 32A |
Figure 6: Socket Cable Requirements
5.3. चार्जर कनेक्ट करणे
- Uncoil the charging cable and ensure it is free from kinks or damage.
- Connect the CEE plug of the charger to a suitable power outlet.
- Open the charging port cover on your electric vehicle.
- Insert the Type 2 charging gun into your vehicle's charging port until it clicks securely into place.
Figure 7: 7.2KW 1-Phase Charger Connection Diagram
Watch this video for a visual guide on connecting and operating the charger:
Video 1: Charger Connection and Operation Demonstration
6. ऑपरेटिंग सूचना
6.1. Starting and Stopping Charging
- Once the charger is connected to the power outlet and your vehicle, the LCD screen on the control box will display charging information.
- To start charging, press the green button on the control box. The display will indicate "Charging...".
- To stop charging, press the green button again. The display will show "Idle" or "Charging finish".
- Always disconnect the charging gun from the vehicle first, then unplug the CEE plug from the power outlet.
२. करंट समायोजित करणे
The charger allows you to adjust the charging current. This must be done आधी connecting the charging gun to your vehicle.
- With the CEE plug connected to the power outlet but the charging gun NOT connected to the vehicle, hold the green button on the control box for 5 seconds to enter the function selection interface.
- Press the button briefly (1 second) to cycle through options until "Change Current" is highlighted.
- Hold the button for 5 seconds to confirm the selection.
- Use brief presses to select the desired current (e.g., 8A, 10A, 13A, 16A, 28A, 32A depending on model).
- Hold the button for 5 seconds to confirm the new current setting.
6.3. Setting Charging Time (Time Reservation)
You can schedule the charging start time up to 10 hours in advance:
- With the CEE plug connected to the power outlet but the charging gun NOT connected to the vehicle, hold the green button on the control box for 5 seconds to enter the function selection interface.
- Press the button briefly (1 second) to cycle through options until "Time Reservation" is highlighted.
- Hold the button for 5 seconds to confirm the selection.
- Use brief presses to set the desired delay (0-10 hours).
- Hold the button for 5 seconds to confirm the time reservation. The charger will begin charging after the set delay.
7. देखभाल
- स्वच्छता: Wipe the charger's exterior with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the charging gun and CEE plug are clean and free of debris before each use.
- स्टोरेज: When not in use, store the charger in its provided bag in a dry, cool place, away from direct sunlight and extreme temperatures.
- तपासणी: Regularly inspect the charging cable, plugs, and charging gun for any signs of wear, cuts, cracks, or damage. If any damage is found, discontinue use immediately and contact customer support.
- पर्यावरणीय परिस्थिती: While rated IP55, avoid prolonged exposure to heavy rain or harsh weather conditions.
8. समस्या निवारण
जर तुम्हाला तुमच्या चार्जरमध्ये समस्या येत असतील, तर खालील सामान्य समस्या आणि उपाय पहा:
| समस्या | संभाव्य कारण | उपाय |
|---|---|---|
| चार्जर सुरू होत नाही/पॉवर नाही | No power from outlet, CEE plug not fully inserted, vehicle not ready to charge. | Check power outlet, ensure CEE plug is fully inserted, verify vehicle's charging status. |
| चार्जिंग अनपेक्षितपणे थांबते | Overheat protection, overcurrent protection, vehicle fault, power interruption. | Check for obstructions around the charger, reduce current if possible, check vehicle for error messages, ensure stable power supply. |
| LCD display shows error message | Internal fault, specific protection triggered. | Note the error code (if any) and consult the display functions diagram (Figure 2). Disconnect and reconnect the charger. If the error persists, contact customer support. |
| Cannot adjust current or set time | Charging gun connected to vehicle during adjustment attempt. | Ensure the charging gun is disconnected from the vehicle before attempting to adjust current or set time. |
१.६. वापरकर्ता टिपा
- वर्तमान समायोजन: Always adjust the charging current (6A-32A or 6A-16A, depending on your model) before plugging the charging gun into your vehicle. This ensures optimal charging and prevents potential issues.
- अनुसूचित चार्जिंग: Utilize the time reservation feature (0-10 hours) to schedule charging during off-peak electricity hours or to align with your daily routine.
- पोर्टेबिलिटी: The compact design and included storage bag make this charger ideal for travel. You can easily carry it in your car and monitor charging data via the LCD screen wherever you go.
- व्यापक सुसंगतता: This charger is compatible with a wide range of electric and hybrid vehicles that use the IEC 62196-2 (Type 2) charging protocol, including popular brands like Tesla, BMW, Audi, Mercedes Benz, and more.
Figure 8: Compatible Vehicle Brands
10. हमी आणि समर्थन
The JIGU Portable EV Charger comes with a दोन वर्षांची वॉरंटी from the date of purchase. This warranty covers manufacturing defects and ensures the quality of our product. Additionally, we provide permanently free software services for your charger.
For any questions, technical support, or warranty claims, please contact JIGU customer service through your purchase platform or the official JIGU webसाइट
Figure 9: CE and RoHS Certifications
