परिचय
The HANMATEK TI120 is a versatile, rugged, and ergonomically designed infrared thermal imager engineered for professional maintenance and detection tasks. It features a UFPA detector for excellent infrared resolution and offers a variety of palette modes for diverse applications. This manual provides essential information for the safe and effective use of your thermal imager.
पॅकेज सामग्री
सर्व वस्तू उपलब्ध आहेत याची खात्री करण्यासाठी कृपया पावती मिळाल्यावर पॅकेजमधील सामग्री तपासा:
- TI120 Thermal Imager
- कॅरींग केस
- मनगटाचा पट्टा
- टाइप-सी यूएसबी केबल
- 32GB मायक्रो एसडी कार्ड
- वापरकर्ता मॅन्युअल (हा दस्तऐवज)
सेटअप
1. बॅटरी चार्ज करणे
The TI120 is equipped with a 3.7V/5000mAh rechargeable Li-ion battery. For optimal performance, fully charge the device before first use. Connect the Type-C USB cable to the device and a suitable power adapter (not included). The battery indicator on the screen will show charging status. A full charge typically takes approximately 5 hours and provides continuous use for more than 6 hours.
४. मायक्रो एसडी कार्ड घालणे
The device comes with a 32GB Micro SD card for storing thermal images. Locate the SD card slot, typically on the side of the device, and insert the card until it clicks into place. Ensure the device is powered off before inserting or removing the SD card.
ऑपरेटिंग सूचना
1. डिव्हाइस ओव्हरview आणि नियंत्रणे
Familiarize yourself with the buttons and display:
- पॉवर बटण: डिव्हाइस चालू/बंद करण्यासाठी दाबा आणि धरून ठेवा.
- सेट बटण: मेनू पर्यायांमध्ये प्रवेश करा आणि निवडींची पुष्टी करा.
- नेव्हिगेशन बटणे (वर, खाली, डावीकडे, उजवीकडे): मेनूमधून नेव्हिगेट करा आणि सेटिंग्ज समायोजित करा.
- Picture Browsing Button: View संग्रहित प्रतिमा.
- रिटर्न बटण: मागील स्क्रीनवर परत जा किंवा मेनूमधून बाहेर पडा.
- कॅमेरा बटण: Capture thermal images.
- लाइटिंग बटण: Activate the built-in LED light.
2. Image Mode Selection (Fusion Modes)
The TI120 offers five image fusion modes to combine thermal and visible light images for enhanced detail. Use the left and right navigation buttons under the live image screen to adjust the degree of fusion:
- 0% (Pure visible light image)
- 25%
- 50%
- 75%
- 100% (Pure thermal image)
४.४. रंग पॅलेट्स
Choose from 5 color palettes to visualize temperature differences effectively:
- इंद्रधनुष्य
- Iron oxide red
- थंड रंग
- पांढरी उष्णता
- काळा उष्णता
4. Temperature Measurement Methods
The TI120 supports multiple temperature measurement methods:
- Focused Area (ROI) Temperature Measurement: Measure temperature within a selected region of interest.
- Center Point Temperature Measurement: Provides accurate temperature readings at the center of the screen.
- Automatic Tracking of High and Low Temperatures: The device automatically identifies and displays the highest and lowest temperature points, helping to confirm anomalies quickly.
5. High and Low Temperature Alarm
The device features a high and low temperature alarm with LED lights flashing to alert the user when temperatures exceed or fall below set thresholds. This is particularly useful for continuous monitoring.
6. Data Communication and PC Software
The TI120 supports connection to a PC via its Type-C USB port for data transfer and analysis. The PC software offers two modes:
- USB ड्राइव्ह मोड: Browse images, analyze image data, and generate/export PDF reports.
- USB Camera Mode: Take pictures, project images, and automatically save pictures for over-temperature events.
7. अनुप्रयोग
The HANMATEK TI120 is suitable for a wide range of applications, including:
- यांत्रिक तपासणी
- Electrical fault detection (e.g., distribution boxes, motors)
- HVAC system inspection (e.g., pipe leaks)
- DIY repair detection
- Energy auditing
- सुविधा देखभाल
- Auto repair
- Floor heating detection
- पाणी पाईप गळती ओळख
देखभाल
- स्वच्छता: Use a soft, dry cloth to clean the device body. For the lens, use a specialized lens cleaning cloth and solution. Do not use abrasive cleaners or solvents.
- स्टोरेज: Store the device in its carrying case in a cool, dry place when not in use. Avoid extreme temperatures and high humidity.
- बॅटरी काळजी: बॅटरीचे आयुष्य वाढवण्यासाठी, बॅटरी वारंवार पूर्णपणे डिस्चार्ज करणे टाळा. डिव्हाइस नियमितपणे चार्ज करा, जरी ते जास्त काळ वापरात नसले तरीही.
- पर्यावरण संरक्षण: The TI120 has an IP65 rating, meaning it is protected against dust ingress and low-pressure water jets from any direction. However, it is not designed for submersion.
समस्यानिवारण
- डिव्हाइस चालू होत नाही: बॅटरी चार्ज झाली आहे याची खात्री करा. पॉवर सोर्सशी कनेक्ट करा आणि पुन्हा प्रयत्न करा.
- प्रतिमा अस्पष्ट/धूसर: Check if the lens is clean. Adjust the focus if available (this model has fixed focus). Ensure proper distance to the object.
- तापमान वाचन चुकीचे वाटते: Verify the emissivity setting is correct for the material being measured. Ensure there are no strong heat sources interfering with the measurement area.
- हस्तांतरित करू शकत नाही fileएस ते पीसी: Ensure the USB cable is properly connected and the device is in USB Drive mode. Check PC software installation.
तपशील
| वैशिष्ट्य | तपशील |
|---|---|
| Infrared Spectral Bandwidth | 8~14μm |
| Thermal Imaging Pixel | 10800 (120*90) |
| Thermal Imaging Sensitivity | ≤60mK |
| चे फील्ड View Angle (FOV) | 50(H)*38(V) |
| फ्रेम दर | ≤25Hz |
| तापमान श्रेणी | -20°C ~ 400°C (-4°F ~ 752°F) |
| अचूकता | ±2°C or 2% (take the maximum value, at room temperature 25°C) |
| रिझोल्यूशन रेशो | 0.1°C |
| Temperature Measurement Response Time | ≤500ms |
| डिस्प्ले प्रकार | 2.8" TFT LCD |
| डिस्प्ले रिझोल्यूशन | 320*240 |
| प्रतिमा स्वरूप | BMP |
| दृश्यमान प्रकाश लेन्स | होय |
| दृश्यमान प्रकाश रिझोल्यूशन | 640*480 |
| Visible Light Field Of View Angle (FOV) | 8 अंश |
| डेटा कम्युनिकेशन | टाइप-सी यूएसबी |
| बॅटरी | ली-आयन 3.7V/5000mAh |
| सेवा वेळ | 6 तासांपेक्षा कमी नाही |
| चार्जिंग वेळ | ≤ 5 तास |
| वॉल्यूम चार्जिंगtagई / वर्तमान | 5V/2A |
| स्टोरेज तापमान | -20°C ~ 60°C (-4°F ~ 140°F) |
| कार्यरत तापमान | 0 ~ 50°C (32°F ~ 140°F) |
| कार्यरत आर्द्रता | ≤८५% आरएच (नॉन-कंडेन्सिंग) |
| अंतर मोजत आहे | 0.2m-5m (best 1m) |
| भाषा | Chinese, English, Russian, Spanish, French, Italian, Japanese, German |
| स्मार्ट डिव्हाइस आहे का? | होय |
| प्रमाणन | CE |
वापरकर्त्याच्या टीपा
- Hydraulic Pipe Detection: The TI120 can effectively detect hydraulic pipe passages by identifying temperature differences caused by fluid flow or leaks. Look for distinct thermal patterns along the pipe's path.
- Residential Electrician Use: This device is suitable for residential electricians to detect overheating components in distribution boxes, wiring, and appliances, helping to prevent electrical fires and failures.
- इष्टतम मापन अंतर: For the most accurate readings, maintain a measurement distance between 0.2m and 5m, with 1m being ideal.
- उत्सर्जन समायोजन: For precise temperature measurements, especially on different materials, ensure the emissivity setting is correctly adjusted in the device's menu.
हमी आणि समर्थन
For warranty information and technical support, please refer to the warranty card included in your package or contact HANMATEK Official Store directly. Keep your purchase receipt as proof of purchase.
