परिचय
Thank you for choosing the FLIIT AF Model T-28 Trojan RC Warbird Plane. This remote-controlled aircraft is designed for beginner operators and offers an engaging flying experience. This manual provides essential information for the safe assembly, operation, and maintenance of your RC plane. Please read it thoroughly before your first flight.
सुरक्षितता माहिती
⚠ WARNING: For recreation use only. Illegal modification of drones/planes is prohibited. Please also pay attention to the relevant laws and regulations on the use of drones/planes in your country/area to ensure legal use.
- Always operate the RC plane in open areas, away from people, buildings, and obstacles.
- प्रत्येक उड्डाणापूर्वी बॅटरी पूर्णपणे चार्ज केलेली आणि सुरक्षितपणे स्थापित केलेली असल्याची खात्री करा.
- Always turn on the transmitter (remote control) first, then the aircraft. When finished, turn off the aircraft first, then the transmitter.
- जोरदार वारा किंवा प्रतिकूल हवामानात उड्डाण करू नका.
- Keep fingers clear of the propeller when the battery is connected.
- Adult supervision is recommended for operators under 14 years of age.
पॅकेज सामग्री
The PNP (Plug-N-Play) version of the T-28 Trojan includes the following components:
- Airframe with decals pre-applied
- प्रोपेलर
- Brushless Outrunner Motor (3536-750kv)
- Electronic Speed Controller (ESC) (40A with XT60 connector)
- Servos (7 x 9g servos)
- Servoless Electric Retracts
- असेंब्लीसाठी सर्व आवश्यक हार्डवेअर
- ऑपरेटिंग सूचना (हे मॅन्युअल)
तपशील
| वैशिष्ट्य | तपशील |
|---|---|
| विंगस्पॅन | १०० मिमी (४") |
| लांबी | 930 मिमी |
| फ्लाइंग वेट | 1460 ग्रॅम |
| मोटार | 3536-750kv Brushless Outrunner |
| ESC | 40A with XT60 connector |
| प्रोपेलर | 10x6 3-blade |
| सर्वोस | 7 x 9g Servos |
| मागे घेतो | Servoless Electric |
| विधानसभेचे राज्य | Almost Ready (PNP) |
| चॅनेल नियंत्रित करा | 4 channels (requires 6-9 channel TX/RX) |
| दूरस्थ अंतर | 500 मी |
| फ्लाइट वेळ | <5 minutes (dependent on battery and flying style) |
| चार्जिंग वेळ | 3-4 hours (for recommended battery) |
| वॉल्यूम चार्जिंगtage | 220v |
| उर्जा स्त्रोत | इलेक्ट्रिक |
| साहित्य | फोम, प्लास्टिक |
| ऑपरेटर कौशल्य पातळी | नवशिक्या |
| इनडोअर/आउटडोअर वापर | घराबाहेर |
| शिफारस केलेले वय | ८+ वर्षे |
सेटअप आणि विधानसभा
The T-28 Trojan is supplied as a Plug-N-Play (PNP) model, meaning the motor, ESC, and servos are pre-installed. Minimal assembly is required to get your aircraft ready for flight.
आवश्यक वस्तू (समाविष्ट नाही):
- 6-9 Channel Transmitter (TX) and Receiver (RX)
- 14.8V 4S 2200mAh 40C Li-Po Battery
- Compatible Li-Po Battery Charger
- Adapter (if necessary for your charger/battery)
विधानसभा चरण:
- विंग जोडणी: Carefully attach the main wings to the fuselage. Ensure all connections are secure and control surfaces move freely.
- Tail Assembly: Attach the horizontal and vertical stabilizers. Verify that the rudder and elevator servos are connected and functioning correctly with your receiver.
- लँडिंग गियर: The servoless electric retracts are pre-installed. Ensure they extend and retract smoothly.
- प्रोपेलर स्थापना: Securely attach the 10x6 3-blade propeller to the motor shaft. Double-check that it is tightened properly.
- प्राप्तकर्ता स्थापना: Install your 6-9 channel receiver into the designated compartment within the fuselage. Connect all servo leads (aileron, elevator, rudder, throttle, retracts) to the appropriate channels on your receiver.
- बॅटरी प्लेसमेंट: Place the 14.8V 4S 2200mAh 40C Li-Po battery in the battery compartment. Secure it with the provided straps or Velcro to prevent shifting during flight.
- Control Surface Checks: Before connecting the battery, ensure your transmitter is on and bound to the receiver. Perform a range check and verify that all control surfaces (ailerons, elevator, rudder) move in the correct direction relative to your stick inputs.
ऑपरेटिंग सूचना
The FLIIT AF Model T-28 Trojan is controlled via a remote control (transmitter). It is designed for outdoor use and beginner skill levels.
प्री-फ्लाइट चेकलिस्ट:
- सर्व घटक सुरक्षितपणे जोडलेले असल्याची खात्री करा.
- Check battery charge level on both the aircraft and transmitter.
- Verify control surface movement and direction.
- Perform a final visual inspection for any damage or loose parts.
- उड्डाणासाठी अडथळे आणि लोकांपासून मुक्त, मोकळे, मोकळे क्षेत्र निवडा.
टेकऑफ:
With the landing gear extended, place the aircraft on a smooth, flat surface. Gradually increase throttle while applying slight up-elevator to lift off. For hand launch, ensure a strong, level throw into the wind.
उड्डाण नियंत्रणे:
- गळ घालणे: Controls motor speed and altitude.
- आयरॉन्स: Controls roll (banking left/right).
- लिफ्ट: Controls pitch (nose up/down for ascent/descent).
- रुडर: Controls yaw (nose left/right).
- मागे घेते: Operate the landing gear (up/down) via a dedicated switch on your transmitter.
Practice gentle maneuvers at a safe altitude until you are comfortable with the controls. The remote control range is approximately 500 meters.
लँडिंग:
Approach the landing strip into the wind. Reduce throttle and maintain a controlled descent using the elevator. Extend landing gear. Aim for a gentle touchdown, gradually reducing throttle to idle upon contact with the ground.
देखभाल
- स्वच्छता: After each flight, wipe down the aircraft with a soft, dry cloth to remove dirt, grass, or debris.
- प्रोपेलर तपासणी: Regularly check the propeller for cracks, chips, or damage. Replace damaged propellers immediately to ensure safe and efficient flight.
- नियंत्रण पृष्ठभाग: Ensure all hinges and linkages for ailerons, elevator, and rudder are free-moving and secure.
- मोटर आणि ESC: Keep the motor and ESC free from dust and debris. Ensure adequate airflow for cooling.
- बॅटरी काळजी:
- Always use a compatible Li-Po charger.
- Do not overcharge or over-discharge Li-Po batteries.
- Store Li-Po batteries in a cool, dry place, ideally in a fire-safe bag, at a storage voltage (around 3.8V per cell).
- चार्जिंग बॅटरी कधीही लक्ष न देता सोडू नका.
- लँडिंग गियर: Inspect the electric retracts for smooth operation and any signs of wear or damage.
समस्यानिवारण
| समस्या | संभाव्य कारण | उपाय |
|---|---|---|
| विमान नियंत्रणांना प्रतिसाद देत नाही. | Transmitter not turned on; receiver not bound; low battery (TX or RX); loose connections. | Ensure TX is on; re-bind receiver; charge/replace batteries; check all wiring connections. |
| मोटर फिरत नाही. | Throttle trim too low; ESC not armed; motor/ESC connection loose; damaged motor/ESC. | Increase throttle trim; ensure throttle stick is at lowest position when connecting battery; check connections; inspect for damage. |
| Aircraft flies erratically or crashes. | Incorrect control surface direction; unbalanced propeller; strong winds; damaged airframe. | Verify control directions; replace propeller; avoid flying in strong winds; repair/replace damaged parts. |
| लँडिंग गियर मागे हटत नाही/वाढत नाही. | Servo connection loose; damaged retract mechanism; insufficient power. | Check servo connections; inspect retracts for obstructions or damage; ensure battery is adequately charged. |
वापरकर्त्याच्या टीपा
- सरावाने परिपूर्णता येते: As a beginner-level aircraft, consistent practice in a safe, open environment will greatly improve your piloting skills.
- Develop Skills: Operating this RC plane can help develop valuable skills such as hand-eye coordination and problem-solving.
- बॅटरी व्यवस्थापन: Always carry spare charged batteries to extend your flying sessions. Allow batteries to cool before recharging.
- Wind Awareness: Always check wind conditions before flying. Even light winds can significantly affect flight characteristics for a plane of this size.
- Visual Orientation: Pay close attention to the plane's orientation in the sky, especially when it's far away, to avoid disorientation.
हमी आणि समर्थन
For any issues or questions regarding your FLIIT AF Model T-28 Trojan RC Warbird Plane, please contact the seller or manufacturer's customer support. Keep your purchase receipt as proof of purchase.
Please note that damage resulting from improper operation, crashes, or unauthorized modifications may not be covered under warranty.