1. उत्पादन संपलेview
The MIUSI Smart Intelligent Spray System is an automated misting and humidification solution designed for various applications, including vivariums, terrariums, green plant care, moss maintenance, and turtle cylinder humidification. It features an integrated water pump and timer, allowing for precise control over spray duration and frequency without the need for a direct faucet connection.
2. पॅकेज सामग्री
कृपया तुमच्या पॅकेजमध्ये खालील सर्व वस्तू समाविष्ट आहेत याची खात्री करा:
- 1 x Main Engine (Control Unit with integrated pump)
- 1 x Spray Head (Nozzle)
- 5m x PE Water Pipe
- 1 x English/Chinese Version Instruction Manual
- 1 x Pipe Cutter
- 1 x Self-Suction Head (Filter)
- 1 x टी कनेक्टर
- 1 x एल्बो कनेक्टर
- 5 x R Clips (for securing pipes)
- 2 x Plugs (for sealing unused pipe ends)
- 5 x केबल टाय
3. तपशील
| वैशिष्ट्य | तपशील |
|---|---|
| कार्यरत खंडtage | 5V |
| शक्ती | ≤ 5W |
| Number of Nozzles (Kit) | 1 spray head included, system supports multiple spray points using connectors. (Technical parameters suggest typical setup with 2 nozzles) |
| Product Size (Main Engine) | 80 मिमी x 100 मिमी x 35 मिमी |
| पॅकेज आकार | 205 मिमी x 215 मिमी x 75 मिमी |
| Pipeline Length | 5m |
| वेळ मोड | Cycle Timing (Loop Timing) |
| Timing Accuracy (Spray Duration) | Adjustable from 5 seconds to 60 seconds (in 5-second increments) |
| Timing Accuracy (Stop Duration) | Adjustable from 1 hour to 24 hours (in 1-hour increments) |
| साहित्य | प्लास्टिक |
| प्रकार | Watering Kits |
४. सेटअप सूचना
Follow these steps to set up your Intelligent Spray System:
- Prepare the Pipeline: Use the provided pipe cutter to cut the 5m PE water pipe into desired lengths for your setup. Plan where you want your spray points to be.
- Assemble Nozzles and Connectors: Install the spray head(s), tee connectors, and elbow connectors onto the cut pipeline sections. Ensure a snug fit. If you have unused pipe ends, seal them with the provided plugs.
- Connect Water Outlet: Connect one end of your assembled pipeline (the output side) to the water outlet port on the main engine.
- Install Self-Suction Head: Attach the self-suction head (filter) to one end of a separate piece of pipeline. This will be your water inlet.
- पाण्याचा प्रवेशद्वार जोडा: Connect the other end of the water inlet pipeline (with the self-suction head) to the water inlet port on the main engine.
- Position Water Source: Place the self-suction head into a clean water reservoir (e.g., a water bottle or bucket). Ensure the filter is fully submerged.
- Secure Pipeline: Use the R clips and cable ties to secure the pipeline and nozzles in your terrarium, vivarium, or plant area.
- पॉवर चालू: Plug the power adapter into a suitable electrical outlet and connect it to the main engine. The display will light up.
5. ऑपरेटिंग सूचना
The main engine features a digital display and three control buttons for setting the spray duration, mode, and stop duration.
- Setting Spray Duration:
Press the 'Spray Duration' button (leftmost icon). Each press will increase the spray time by 5 seconds. The duration can be set from 5 seconds up to a maximum of 60 seconds. - मोड निवडणे:
Press the 'Mode' button (middle power icon). There are three modes available, allowing you to choose the desired operational pattern. Refer to the full instruction manual for details on each mode. - Setting Stop Duration (Interval):
Press the 'Stop Duration' button (rightmost icon). Each press will add 1 hour to the interval between sprays. The stop duration can be set from 1 hour up to a maximum of 24 hours. - Initiating Spray:
Once the desired spray duration, mode, and stop duration are set, the system will automatically begin its cycle.
6. देखभाल
Regular maintenance ensures optimal performance and longevity of your spray system:
- पाणी साठा: Regularly check and refill the water reservoir. Ensure the water is clean and free of debris to prevent clogging.
- Self-Suction Head (Filter): Periodically clean the filter on the self-suction head to remove any accumulated particles. This prevents blockages and maintains pump efficiency.
- नोजल: If spray becomes weak or uneven, check the nozzles for mineral buildup or blockages. You can gently clean them with a soft brush or soak them in a descaling solution if necessary.
- पाइपलाइन: Inspect the PE water pipe for any kinks, cracks, or leaks. Ensure all connections are secure.
- Main Engine: Keep the main engine unit clean and dry. Avoid exposing it to excessive moisture or direct sunlight.
7. समस्या निवारण
If you encounter issues with your spray system, refer to the following common problems and solutions:
| समस्या | संभाव्य कारण | उपाय |
|---|---|---|
| No spray or very weak spray | Low water level in reservoir Clogged self-suction head/filter Kinked or blocked pipeline Clogged nozzle(s) वीज समस्या | Refill water reservoir Clean the self-suction head filter Check pipeline for obstructions or damage नोजल स्वच्छ करा किंवा बदला पॉवर ॲडॉप्टर सुरक्षितपणे प्लग इन केले असल्याची खात्री करा |
| सिस्टम चालू होत नाहीये | वीजपुरवठा नाही सदोष पॉवर ॲडॉप्टर | पॉवर कनेक्शन आणि आउटलेट तपासा Try a different compatible 5V power adapter |
| टाइमर सेटिंग्ज काम करत नाहीत | चुकीची सेटिंग्ज सिस्टम त्रुटी | Review and re-enter desired spray and stop durations Unplug and replug the power to reset the system |
| पाण्याची गळती | सैल कनेक्शन Damaged pipeline/connectors | Tighten all pipe connections Inspect and replace any damaged components |
१.६. वापरकर्ता टिपा
- This intelligent spray system is versatile and can be effectively used for reptiles, electronic setups requiring humidity control, and various terrarium environments.
- While the kit includes one spray head, the modular design with tee and elbow connectors allows for customization and expansion to create multiple spray points within your setup.
- Consider using distilled or purified water to minimize mineral buildup in nozzles and prolong the life of your system.
9. हमी आणि समर्थन
वॉरंटी माहिती, तांत्रिक समर्थन किंवा बदली भागांसाठी, कृपया विक्रेत्याशी किंवा उत्पादकाशी थेट संपर्क साधा. खरेदीचा पुरावा म्हणून तुमची खरेदी पावती ठेवा.
