डेव्हलपमेंट किट मॅन्युअल आणि वापरकर्ता मार्गदर्शक

YDLIDAR X4PRO लिडर सेन्सर डेव्हलपमेंट किट वापरकर्ता मॅन्युअल

21 मार्च 2023

YDLIDAR X4PRO Lidar Sensor Development Kit  YDLIDAR X4PRO LIDAR DEVELOPMENT KIT The development kit of YDLIDAR X4PRO lidar (hereinafter referred to as X4PRO) is an accessory tool provided for performance evaluation and early rapid development of the X4PRO. Through the…

ब्रँड: YDLIDAR

NXP OM-SE051ARD-H EdgeLock SE051H Arduino सुसंगत विकास किट वापरकर्ता मार्गदर्शक

6 मार्च 2023

NXP OM-SE051ARD-H EdgeLock SE051H Arduino Compatible Development Kit Get to know the OM-SE051ARD-H board Please visit www.nxp.com/SE051H for more information. Jumper Description Configuration Default   J6, J7   Antenna 1-2: via DB15 connector 2-3: Internal antenna J6 1-2, J7 2-3…

ब्रँड: एनएक्सपी

TURBOX RB5 LU डेव्हलपमेंट किट इंस्टॉलेशन मार्गदर्शक

30 जानेवारी 2023

TURBOX-RB5-LU-Development-Kit Revision History Revision Date Description 1.0 Sep 16, 2021 Initial release. About This Document Illustrations in this documentation might look different from your product. Depending on the model, some optional accessories, features, and software programs might not be available…

Brand: TURBOX

M5STACK-CORE2 आधारित IoT विकास किट वापरकर्ता मॅन्युअल

15 जानेवारी 2023

M5STACK-CORE2 Based IoT Development Kit OUTLINE M5Stick CORE2 is ESP32 board which based on ESP32-D0WDQ6-V3 chip, contained Hardware Composition The hardware of CORE2: ESP32-D0WDQ6-V3 chip, TFT screen, Green LED, Button, GROVE interface, TypeC-to-USB interface, Power Management chip and battery. ESP32-D0WDQ6-V3…

ब्रँड: M5STACK

व्यापक प्रदर्शन EXT3 किट ई-पेपर ईपीडी विकास किट वापरकर्ता पुस्तिका

13 जानेवारी 2023

User Manual of EXT3 Kit Rev. 02 (Mar 2022) Preface EPD Extension Kit Generation 3 (EXT3 kit) is a new driving extension board to connect with your product to kick-start low power display application with EPDs (e-Paper displays). This document…

Brand: PERVASIVE DISPLAY

SILICON LABS C8051F500 डेव्हलपमेंट किट वापरकर्ता मार्गदर्शक

12 जानेवारी 2023

SILICON LABS C8051F500 Development Kit Relevant Devices The C8051F500 Development Kit is intended as a development platform for the microcontrollers in the C8051F50x/51x MCU family. The target board included in this kit is provided with a pre-soldered C8051F500 MCU (LQFP48…

ब्रँड: सिलिकॉन लॅब्स

ublox USB-NORA-W256AWS AWS IoT एक्सप्रेसलिंक मल्टीरेडिओ डेव्हलपमेंट किट वापरकर्ता मार्गदर्शक

९ डिसेंबर २०२३

ublox USB-NORA-W256AWS AWS IoT ExpressLink Multiradio Development Kit Introduction The USB-NORA-256AWS evaluation kit comprises a small 16x22 mm evaluation board that conveniently exposes the supported interfaces of the NORA-W256AWS module, which is mounted directly on the board. The board has…

Brand: Ublox

Thundercomm TurboX C865C विकास किट वापरकर्ता मार्गदर्शक

९ डिसेंबर २०२३

Thundercomm TurboX C865C Development Kit Interface List Type-A USB 3.0 connector Digital microphone 3 HDMI OUT connector Digital microphone 1 UART debug connector ZIF FPC BT/Wi-Fi antenna slot 1 BT/Wi-Fi antenna slot 2 HDMI IN connector LEDs Camera connector 3…

Brand: Thundercomm

सिलिकॉन लॅब्स Si1140-DK ऑप्टिकल सेन्सर डेव्हलपमेंट किट वापरकर्ता मार्गदर्शक

९ डिसेंबर २०२३

SILICON LABS Si1140-DK Optical Sensor Development Kit Introduction The Si1140DK is intended as an evaluation and development platform for the Si1143 infrared proximity and ambient light sensor. As shown in Figure 1, the main components of the Si1143 Evaluation Board…

ब्रँड: सिलिकॉन लॅब्स

Thundercomm TurboX C2290, CM2290 विकास किट वापरकर्ता मार्गदर्शक

९ डिसेंबर २०२३

Thundercomm TurboX C2290, CM2290 Development Kit Package List NOTE: All parts are included in advanced DK package. Parts marked are not included in standard DK package. Interface List 1. Power on button 14.SIM card slot 2 27.NA 2. Volume down…

Brand: Thundercomm