ONENUO X-806WZ PIR Motion Sensor
उत्पादन वापर सूचना
- Download and install the Smart Life APP on your phone.
- Register an account via email address on the app.
- Ensure your phone is connected to a local WiFi 2.4GHz network and Bluetooth is enabled.
- Follow further steps based on the version of your product (WiFi or Zigbee).
- Ensure the Zigbee gateway is bound to the APP.
- Press and hold the SET button on the sensor for 5s until the indicator flashes quickly.
- APP will search for nearby Zigbee devices and add them automatically.
- On the Smart Life APP main page, click the + in the upper right corner and select Add Device.
- Press and hold the SET button on the sensor for 5s until the indicator flashes quickly.
- Stick the double-sided block sticker on the back of the sensor.
- Fix the sensor on the wall or ceiling using the double-sided sticker.
परिचय
- या मॅन्युअलमधील चित्रे वापरकर्त्याच्या ऑपरेशनचे मार्गदर्शन करण्यासाठी वापरली जातात आणि केवळ संदर्भासाठी आहेत.
- कृपया तपशीलांसाठी वास्तविक उत्पादनाचा संदर्भ घ्या.
उत्पादन तपशील
| वायरलेस प्रोटोकॉल: | WiFi 2.4GHz (0ptional) |
| वायरलेस प्रोटोकॉल: | Zigbee 3.0 (Optional) |
| बॅटरी प्रकार: | LR03-1.5V/AAA*2 |
| शोध कोन: | ७२° |
| ओळख अंतर: | ≤6M |
| कार्यरत तापमान: | -10°C~+55°C |
| उत्पादन आकार: | 71*25*24 मिमी |
पॅकिंग यादी
| 1. PiR Motion Sensor X1 |
| 2. Manual X1 |
| 3. Double-sided block X1 |
| 4. Pin X1 |
उत्पादन वर्णन
वापरासाठी तयारी
- स्मार्ट लाइफ ॲप
Before the device binding operation, please install the “Smart Life ” APP on your phone and register your account via email address. The App can be downloaded by scanning QR code or from the Google Play or App Store.
- Ensure that your phone is connected to the local WiFi 2.4GHz Network and Bluetooth is enabled.
For further steps, please choose the description corresponding to the version of your product.
WI-FI version (binding directly with the router)
Zigbee version (binding with Zigbee gateway)
बंधनकारक डिव्हाइस वर्णन
वायफाय आवृत्ती
- On the “Smart Life” APP main page, click the “+” in the upper right corner, select “Add Device”.
- Use a pin to press and hold the “SET button” of the sensor for 5s until the indicator flashes quickly.
- APP will search for nearby devices via bluetooth, and press the device after searching.
- Enter the correct password of WIFI then press “Next”, the device will automatically connect to the network.
झिग्बी आवृत्ती
टीप: Before the device binding operation, please make sure that the Zigbee gateway is bound to the APP.
- Enter the Zigbee Gateway page, click “Add subdevice”.
- Use a pin to press and hold the “SET button” of the sensor for 5s until the indicator flashes quickly.
- APP searches for nearby Zigbee devices and automatically add them.
If the Zigbee gateway “search device” time is more than 2 mins, it will exit from matching. We can exit the gateway and enter into again to operate.
स्थापना
- Stick the double-sided block sticker on the back of the sensor
- Fix the back with the double-sided sticker on the wall or ceiling.
वारंवार विचारले जाणारे प्रश्न
Q: What is the installation height recommendation for the PIR Motion Sensor?
A: The installation height should be between 1.0 to 2 meters above the ground.
Q: What is the detection distance of the PIR Motion Sensor?
A: The detection distance is 6 meters.
कागदपत्रे / संसाधने
 |
ONENUO X-806WZ PIR Motion Sensor [pdf] वापरकर्ता मॅन्युअल 806WT, X-806WZ, 806WT, X-806WZ PIR Motion Sensor, X-806WZ, PIR Motion Sensor, Motion Sensor |