101-0027
HART Protocol Modem – USB-A Interface
स्थापना ऑपरेशन आणि तपशील मॅन्युअल

सामान्य वर्णन

MicroLink 101-0027 is a USB HART protocol modem. It provides the hardware interface between Highway Addressable Remote Transducer devices (HART®) and a Windows PC with a USB port. MicroLink is used for commissioning, diagnostics, monitoring, and testing HART field devices.
Virtual serial port drivers allow the USB MicroLink modem to appear as an RS-232 com port to Windows and your HART software, ensuring compatibility.
A rugged design makes MicroLink an ideal choice for field engineers and technicians who service HART devices in an industrial environment.
MicroLink is compatible with all registered HART devices and all leading HART configuration and monitoring software.

620-0009 R5 © Microfl ex 2012-2025

Modem Setup – USB Driver

Download the latest HART products setup software from microflx.com/products/hart-setup
डाउनलोड केलेले चालवा file फोल्डरमध्ये काढण्यासाठी.
Browse to the folder and run Msetup.exe to open the HART Protocol Setup Utility.

महत्वाचे!
Install USB driver before connecting to the USB port.

HART Protocol Setup Utility (Msetup.exe)

Click the Install button in the 101-0027, 101-0027C window to pre-install the USB drivers. The driver installer will guide you through the setup process.
After installing the drivers, connect your modem to a USB port to complete the setup.

यूएसबी ड्रायव्हर्स विस्थापित करत आहे

If needed, use Windows Device Manager to uninstall the driver from your system. With the modem connected to the USB port, locate the MicroLink modem in the Device Manager hardware tree under Ports (COM & LPT). Right click on MicroLink HART Protocol Modem and select Uninstall from the pop-up menu. When the process has finished, unplug the modem from the USB port.

ड्रायव्हर माहिती file – Manually Installing

ड्रायव्हर inf व्यक्तिचलितपणे स्थापित करण्यासाठी file…

1. कन्व्हर्टरला USB पोर्टशी जोडा.
2. विंडोज डिव्हाइस मॅनेजर उघडा.
3. The New Device Wizard will have added the converter under Ports (COM & LPT) and will appear as MicroLink HART Protocol Modem (COMx). Right click the device and select Update Driver Software…
4. Choose to Browse for the driver software and browse to the CD or the location of the MxHART.inf file.
5. ड्राइव्हर सेटअप पूर्ण करण्यासाठी विझार्ड सूचनांचे अनुसरण करा.

असाइन केलेला COM पोर्ट नंबर शोधत आहे

When Windows installed the serial port driver, the next available COM port number was assigned to the modem. The software you use with the modem must be set to use the COM port number assigned to your modem. To locate your modem’s COM port number, use the HART Protocol Setup Utility or the Windows Device Manager.
To find your COM port number using the HART Protocol Setup Utility
Click the Com Port List… button to view a list of ports found on your PC. The list is continuously updated. When you connect your modem to a USB port it will appear in the list. When you unplug from the USB port it will be removed from the list.

Com Port List view
MicroLink modem is assigned to COM 3

To find your COM port number using Device Manager
Open Device Manager and select View > Devices by Type.
You may need to expand the Device Manager tree under Ports (COM and LPT) to see the converter.
In the following Device Manager screen shot, the MicroLink modem is assigned to COM 3.

विंडोज डिव्हाइस व्यवस्थापक
MicroLink modem is assigned to COM 3

The assigned serial COM port number can be changed to any available COM port using Windows Device Manager.
Expand Ports (COM & LPT) in the list to see which port the converter is assigned to.
Right click MicroLink HART Protocol Modem and select Properties from the pop-up menu.
On the Port Settings tab, click Advanced.
Drop down the COM Port Number list and select the desired port number. Click OK to use the new port number and close the window.
Unplug the MicroLink modem from the USB port and then re-connect it to allow Windows to update the USB device parameters.
प्रॉपर्टीज विंडो बंद करण्यासाठी पुन्हा ओके वर क्लिक करा.

सॉफ्टवेअर सेटअप

Make sure your HART software is set to use the same serial COM port number that the MicroLink modem is assigned to.
There are no hardware settings required by the MicroLink modem and modem power is provided by the USB port. All other settings, such as BAUD rate and parity, are taken care of by your HART software.

HART डिव्हाइसशी कनेक्ट करत आहे

Connect the two mini-clips to the HART device or HART loop. MicroLink provides electrical isolation between the HART loop and the PC. It is safe to ignore grounding and polarity issues when making the HART connections.
The HART protocol requires a loop resistance of 230 to 600 ohms, typically 250 ohms. Refer to your equipment installation instructions for details on connecting a HART protocol modem or configuration device to the loop.

Two common methods for connecting the HART modem to a loop powered device.

सुरक्षितता विचार

भाग 2 आणि भाग 15, फेडरल कम्युनिकेशन नियम आणि नियमांचे सबपार्ट्स A आणि B आणि इंडस्ट्री कॅनडा मानकांचे ICES-003 नुसार अनुरूपता.
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer-ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by Microflex could void the user’s authority to oper-ate this equipment.
उत्सर्जन EN55022: 1998
इलेक्ट्रोस्टॅटिक डिस्चार्ज EN61000-4-2: 1995, A1: 1998, A2: 2001
रेडिएटेड इम्युनिटी EN 61000-4-3: 2002
सुरक्षा अनुपालन EN 60950-1: 2002
या डिव्हाइसला ओव्हर-व्हॉल्यूमपासून संरक्षण नाहीtages जे संगणकाच्या USB पोर्टवर अस्तित्वात असू शकतात आणि होस्ट संगणकामध्ये विद्यमान संरक्षणावर अवलंबून असतात.
This device is not intended for connection to the phone line through the ap-propriate converters and shall not be connected to telecommunication lines because it has no protection against over-voltagया ओळींमध्ये अस्तित्वात असलेल्या गोष्टी.
वापरकर्त्याने धोकादायक व्हॉल्यूम असलेल्या भागात प्रवेश करण्यापासून ऑपरेटरचे संरक्षण सुनिश्चित केले पाहिजेtages किंवा त्यांच्या उपकरणांमध्ये घातक ऊर्जा.
फील्ड डिव्हाईस आणि मॉडेमचे कनेक्शन पोर्ट फील्ड डिव्हाईसमध्ये अस्तित्वात असलेल्या कोणत्याही प्राथमिक सर्किटपासून किमान मूलभूत इन्सुलेशनद्वारे वेगळे केले असल्याची खात्री वापरकर्त्याने केली पाहिजे.

मायक्रोलिंक तपशील

संलग्न
Molded Buna-N 90 Durometer Rubber with Stainless Steel Cover
Weight……………………………………………………………………………………. 5 ounces
Modem Dimensions ……………………………………………… 1.75” x 2.375” x 0.625”

यूएसबी
Connector…………………………………………………………………………………..USB-A
Cable Length …………………………………………………………………………………6 feet
Compatibility ……………………………………………………… USB 1.1, USB 2, USB 3
Active Current ………………………………………………………………………..30mA Max
Suspend Current ………………………………………………… Less than 200μA Typical

हार्ट
Termination ……………………………………………….Pamona Electronics Mini-Clips
Leads …………………………………………….. 1 Foot High Flexibility Test Lead Wire
Connection Method ……………………… Transformer Isolated, Capacitor Coupled
डीसी लूप व्हॉलtage ……………………………………………………………………50Vdc Max
Demodulation Jitter …………………………………………………… 12% of 1 bit Typical
Carrier Detect Threshold…………………………………………………… 100mV Typical
Leakage to Process Loop ……………………………………………………….±10μA Max

पर्यावरणीय
Operating Temperature …………………………………………….-20ºC to 50ºC (-4ºF to 122ºF)
Storage Temperature ………………………………….-40ºC to 85ºC (-40ºF to 185ºF)
Humidity ……………………………………………………….. 0 to 99% (non-condensing)

मर्यादित वॉरंटी

मायक्रोफ्लेक्स, एलएलसी या युनिटला शिपमेंटच्या तारखेपासून एक वर्षाच्या कालावधीसाठी साहित्य आणि कारागिरीतील दोषांविरुद्ध वॉरंटी देते. मायक्रोफ्लेक्स, एलएलसी, त्याच्या पर्यायाने, वॉरंटी कालावधी दरम्यान दोषपूर्ण असल्याचे सिद्ध होणारी उपकरणे दुरुस्त करेल किंवा बदलेल. या वॉरंटीमध्ये सुटे भाग आणि कामगार समाविष्ट आहेत.
वॉरंटी कामासाठी उपकरणे स्वीकारली जाण्यापूर्वी फॅक्टरीमधून रिटर्न मटेरियल ऑथोरायझेशन (RMA) क्रमांक प्राप्त करणे आवश्यक आहे आणि पॅकेजच्या बाहेरील बाजूस स्पष्टपणे चिन्हांकित केले पाहिजे.
मायक्रोफ्लेक्स, एलएलसीचा असा विश्वास आहे की या मॅन्युअलमधील माहिती अचूक आहे. जर टायपोग्राफिकल किंवा तांत्रिक त्रुटी आढळली तर, मायक्रोफ्लेक्स, एलएलसी या आवृत्तीच्या धारकांना पूर्वसूचना न देता बदल करण्याचा अधिकार राखून ठेवते. कोणत्याही त्रुटी आढळल्यास वाचकांनी मायक्रोफ्लेक्स, एलएलसीचा सल्ला घ्यावा. कोणत्याही परिस्थितीत या दस्तऐवजामुळे किंवा त्यात असलेल्या माहितीमुळे उद्भवणाऱ्या किंवा त्याच्याशी संबंधित कोणत्याही नुकसानीसाठी मायक्रोफ्लेक्स, एलएलसी जबाबदार राहणार नाही.
EXCEPTAS SPECIFIED HEREIN, MICROFLEX, LLC MAKES NO WARRANTIES OR MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. CUSTOMER’S RIGHT TO RECOVER DAMAGES CAUSED BY FAULT OR NEGLIGENCE ON THE PART OF MICROFLEX SHALL BE LIMITED TO THE AMOUNT THERETOFORE PAID BY THE CUSTOMER. MICROFLEX, LLC WILL NOT BE LIABLE FOR DAMAGES RESULTING FROM LOSS OF DATA, PROFITS, USE OF PRODUCTS, OR INCIDENTAL OR CONSEQUENTIAL DAMAGES, EVEN IF ADVISED OF THE POSSIBILITIES THEREOF. This limitation of the liability of Microflex, LLC will apply regardless of the form of action, whether in contract or tort, including negligence. Any action against Microflex, LLC must be brought within one year after the cause of action accrues. The warranty provided herein does not cover damages, defects, malfunctions, or service failures caused by owners failure to follow Microflex, LLC’s installation, operation, or maintenance instructions; owners modification of the product; owner’s abuse, misuse, or negligent acts; and power failure or surges, fire, flood, accident, actions of third parties, or other events outside reasonable control.

मायक्रोफ्लेक्स, एलएलसी
35900 Royal Road Pattison, Texas 77423 USA
फोन ५७४-५३७-८९००
फॅक्स ५७४-५३७-८९००
www.microflx.com

http://www.microflx.com

ऑस्टिन टेक्सासमधील फील्डकॉम ग्रुपद्वारे हार्ट प्रोटोकॉल समर्थित आहे, www.fieldcommgroup.org.
HART is a registered trademark of the Field Comm Group.

कागदपत्रे / संसाधने

Microflex 101-0027 MicroLink USB Hart Protocol Modem [pdf] सूचना पुस्तिका 101-0027, 101-0027 MicroLink USB Hart Protocol Modem, 101-0027, MicroLink USB Hart Protocol Modem, USB Hart Protocol Modem, Hart Protocol Modem, Protocol Modem, Modem

संदर्भ

• वापरकर्ता मॅन्युअल