सॅटको एस९९२०

Satco S12535 ST19 LED Light Bulb User Manual

मॉडेल: S12535

परिचय

Thank you for choosing the Satco S12535 ST19 LED Light Bulb. This manual provides essential information for the safe and efficient use of your new LED bulb. Please read these instructions carefully before installation and retain them for future reference.

Satco S12535 ST19 LED Light Bulb

Image: The Satco S12535 ST19 LED Light Bulb, clear glass with visible filaments.

महत्वाची सुरक्षितता माहिती

  • इलेक्ट्रिक शॉकचा धोका: बल्ब बसवण्यापूर्वी किंवा बदलण्यापूर्वी नेहमी वीज खंडित करा.
  • इनडोअर/आउटडोअर वापर: This bulb is rated for wet locations (IP65) and suitable for enclosed fixtures. It can be used indoors or in covered outdoor environments.
  • खंडtage: फिक्स्चर व्हॉल्यूमची खात्री कराtage is 120V. Do not use with incompatible voltage.
  • मंद करणे: This bulb is dimmable. Use only with compatible 120V dimmers. Incompatible dimmers may cause flickering or damage.
  • तापमान: Do not operate outside the specified temperature range of -20°C to +45°C.
  • हाताळणी: Allow the bulb to cool before handling. Avoid touching the bulb with bare hands immediately after use.
  • विल्हेवाट: Dispose of LED bulbs according to local regulations.

सेटअप आणि स्थापना

  1. वीज बंद: Before installation, ensure the power supply to the fixture is turned off at the circuit breaker or fuse box.
  2. जुना बल्ब काढा: Carefully unscrew the existing bulb from the fixture.
  3. नवीन बल्ब घाला: Screw the Satco S12535 LED bulb into the E26 medium base socket. Ensure it is securely tightened but do not overtighten.
  4. पॉवर चालू: फिक्स्चरची शक्ती पुनर्संचयित करा.
  5. Dimmer Compatibility (if applicable): If using a dimmer, ensure it is compatible with LED bulbs and rated for 120V.
E26 Medium Base on Satco LED Bulb

Image: Close-up of the E26 medium base of the Satco LED bulb, indicating its standard screw-in design.

ऑपरेशन

The Satco S12535 LED bulb is designed for immediate illumination upon power activation. It provides 425 lumens of 5000K natural white light, suitable for various applications.

  • ब्राइटनेस कंट्रोल: When connected to a compatible 120V dimmer, the brightness can be adjusted from full intensity to a lower, softer glow.
  • प्रकाश गुणवत्ता: The bulb features a high Color Rendering Index (CRI) of 92, ensuring accurate and natural color representation of objects in its light.
  • बीम स्प्रेड: A 300-degree beam spread provides wide and even illumination, minimizing shadows.
Satco ST19 LED bulb illuminating a modern living space

Image: The Satco ST19 LED bulb installed in a fixture, providing illumination to a modern living room and kitchen area.

देखभाल

The Satco S12535 LED bulb requires minimal maintenance due to its long rated life of 15,000 hours.

  • स्वच्छता: To clean the bulb, ensure the power is off and the bulb is cool. Wipe gently with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
  • बदली: Replace the bulb when it reaches the end of its operational life. Follow the installation steps in reverse to remove the old bulb.

समस्यानिवारण

If you encounter issues with your Satco S12535 LED bulb, refer to the following common troubleshooting steps:

  • बल्ब उजळत नाही:
    • फिक्स्चरला वीजपुरवठा चालू असल्याची खात्री करा.
    • बल्ब सुरक्षितपणे स्क्रू केलेला आहे का ते तपासा.
    • बल्ब सदोष नाही याची खात्री करण्यासाठी दुसऱ्या कार्यरत फिक्स्चरमध्ये त्याची चाचणी करा.
    • Verify the fixture itself is operational.
  • Flickering or Inconsistent Light:
    • If using a dimmer, ensure it is compatible with LED bulbs. Older incandescent-only dimmers may cause flickering.
    • Check for loose connections in the fixture or bulb socket.
    • व्हॉल्यूमची खात्री कराtage supply is stable at 120V.
  • Bulb is Too Dim or Too Bright:
    • If using a dimmer, adjust the dimmer setting.
    • Confirm the bulb's specifications (425 lumens, 5000K) match your lighting requirements.

तपशील

वैशिष्ट्यतपशील
मॉडेल क्रमांकS12535
वाटtage६ वॅट्स (६० वॅट्स इनॅन्डेसेंट समतुल्य)
चमक425 लुमेन
रंग तापमान४००० के (नैसर्गिक पांढरा)
बल्ब आकारST19
बेस प्रकारE26 मध्यम बेस
कलर रेंडरिंग इंडेक्स (CRI)92
बीम कोन300 अंश
खंडtage120V
अंधुकYes (with compatible 120V dimmers)
रेट केलेले जीवन15,000 तास
पर्यावरणीय रेटिंगWet Location Rated (IP65), Enclosed Fixture Rated
ऑपरेटिंग तापमान-20°C ते +45°C
प्रमाणपत्रेcULus, FCC, RoHS
पॉवर फॅक्टर0.7
वारंवारता60Hz
वस्तूचे वजन (४-पॅक)1.06 पाउंड
Lighting Facts label for Satco S12535 LED bulb

Image: Lighting Facts label detailing brightness, estimated yearly energy cost, life, light appearance (5000K), and energy used (5 watts).

हमी आणि समर्थन

The Satco S12535 ST19 LED Light Bulb is backed by a २ वर्षांची उत्पादकाची वॉरंटी खरेदीच्या तारखेपासून.

For warranty claims, technical assistance, or product support, please contact Satco customer service directly. Refer to the product packaging or the official Satco webसध्याच्या संपर्क माहितीसाठी साइट.

Webसाइट: www.satco.com

© २०२४ सॅटको. सर्व हक्क राखीव.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.