Beleeb BLB-KTS-D1315 13x15 Inch Drop-In Bar Sink User Manual

1. महत्वाची सुरक्षितता माहिती

कृपया इंस्टॉलेशन आणि वापरण्यापूर्वी सर्व सूचना काळजीपूर्वक वाचा. भविष्यातील संदर्भासाठी हे मॅन्युअल जपून ठेवा.

• स्थापनेदरम्यान सर्व स्थानिक प्लंबिंग आणि बिल्डिंग कोडचे पालन केले जात आहे याची खात्री करा.
• स्थापनेदरम्यान योग्य वैयक्तिक संरक्षक उपकरणे (पीपीई) जसे की सुरक्षा चष्मा आणि हातमोजे घाला.
• कोणतेही प्लंबिंग काम सुरू करण्यापूर्वी मुख्य पाणीपुरवठा बंद करा.
• Handle the sink with care to avoid damage or injury.
• सिंकच्या पृष्ठभागावर अपघर्षक क्लीनर किंवा कठोर रसायने वापरू नका, कारण यामुळे फिनिश खराब होऊ शकते.

2. उत्पादन संपलेview

The Beleeb BLB-KTS-D1315 is a 13x15 inch drop-in bar sink constructed from 18-gauge stainless steel. It features a 9-inch deep single bowl, designed for versatile use in kitchens, RVs, and bars.

2.1 प्रमुख वैशिष्ट्ये

• संक्षिप्त आकार: 13x15x9 inch dimensions, ideal for smaller spaces.
• टिकाऊ बांधकाम: 18-gauge stainless steel with an upgraded millet-grain 3D embossed surface for enhanced scratch resistance.
• कार्यक्षम ड्रेनेज: Slight bottom slope and X-guide design with bottom water grooves for rapid water drainage.
• आवाज कमी करणे: 3mm thick rubber padding and special moisture-absorbing coat to reduce noise and prevent condensation.
• समाविष्ट ॲक्सेसरीज: Basket strainer, 114mm large-diameter drain, stainless steel bottom grid.

२.२ घटक समाविष्ट

स्थापना सुरू करण्यापूर्वी सर्व घटक उपस्थित आहेत याची खात्री करा.

आकृती 1: Sink body, mounting clips, drain assembly, and bottom grid.

• Sink Body
• Drainage Grid (Bottom Grid)
• Drain Outlet (Basket Strainer and Drain Assembly)
• Mounting Clips (if applicable for topmount installation)
• Installation Template (usually included for cutout)

3. स्थापना सूचना

This section provides general guidelines for top-mount installation. Consult a professional plumber if you are unsure about any steps.

3.1 आवश्यक साधने आणि साहित्य

• सुरक्षा चष्मा आणि हातमोजे
• Jigsaw or appropriate cutting tool
• ड्रिल
• मापन टेप आणि पेन्सिल
• Silicone sealant (kitchen and bath grade)
• समायोज्य रेंच किंवा पक्कड
• पेचकस

३.२ काउंटरटॉपची तयारी

1. मापन आणि चिन्हांकित करा: Use the provided template (if available) or the sink's dimensions to mark the cutout area on your countertop. Ensure proper clearance from cabinets and walls. The sink exterior dimensions are approximately 13 inches (length) by 15 inches (width).
2. ओपनिंग कट करा: Carefully cut the marked opening in the countertop using a jigsaw or suitable cutting tool. Ensure the edges are smooth.
3. सील कडा: Apply a waterproof sealant to the raw edges of the countertop cutout to prevent moisture damage.

आकृती 2: Sink dimensions and recommended cutout for top-mount installation.

3.3 Sink Installation

1. Install Faucet and Accessories (Optional): If your sink has pre-drilled holes for a faucet or soap dispenser, install them onto the sink before placing the sink into the countertop opening.
2. सीलंट लावा: Apply a continuous bead of silicone sealant around the perimeter of the sink's underside rim that will contact the countertop.
3. सिंकची स्थिती: Carefully lower the sink into the countertop opening, ensuring it is properly aligned. Press down firmly to create a seal.
4. Secure with Clips: Attach the mounting clips (if provided) to the underside of the sink rim and tighten them against the countertop to secure the sink in place. Do not overtighten.
5. Wipe Excess Sealant: Immediately wipe away any excess silicone sealant that squeezes out from under the rim.

3.4 Drain Assembly Installation

1. Prepare Drain: Apply plumber's putty or a silicone bead around the flange of the basket strainer.
2. Insert Drain: Insert the basket strainer into the sink's drain opening from the top.
3. खालील वरून सुरक्षित करा: From underneath the sink, attach the rubber gasket, friction washer, and locknut to the drain body. Tighten securely with an adjustable wrench.
4. प्लंबिंग कनेक्ट करा: Connect the drain assembly to your household plumbing system according to local codes. Ensure all connections are watertight.

4. ऑपरेशन

The Beleeb bar sink is designed for straightforward use. Once installed and connected to the water supply and drainage, it functions like any standard kitchen or bar sink.

• पाण्याचा प्रवाह: Use your installed faucet to control water flow and temperature.
• निचरा: The sink's sloped bottom and X-guide design facilitate quick water drainage. The included basket strainer prevents large debris from entering the drain.
• ॲक्सेसरीज वापरणे: The stainless steel bottom grid can be placed in the sink to protect the bottom surface and allow items to air dry.

5. काळजी आणि देखभाल

Proper care will ensure the longevity and appearance of your stainless steel sink.

5.1 दैनंदिन स्वच्छता

• प्रत्येक वापरानंतर, अन्नाचे कण आणि अवशेष काढून टाकण्यासाठी सिंक पाण्याने पूर्णपणे स्वच्छ धुवा.
• पाण्याचे डाग टाळण्यासाठी, विशेषतः कठीण पाण्याच्या ठिकाणी, सिंक मऊ कापडाने पुसून कोरडे करा.
• Use a mild dish soap and a soft sponge or cloth for general cleaning.

५.२ नुकसान टाळणे

• अपघर्षक पदार्थ टाळा: Do not use steel wool, abrasive pads, or harsh chemical cleaners (e.g., bleach, ammonia-based products) as they can scratch or stain the stainless steel finish.
• ओरखडे टाळा: While the 3D embossed surface is scratch-resistant, avoid dragging sharp or heavy objects across the sink surface. The included bottom grid helps protect the sink.
• उष्णता संरक्षण: Do not place extremely hot pots or pans directly into the sink without protection, as extreme temperature changes can affect the material over time.
• गंज प्रतिबंध: Remove any iron-containing objects (e.g., cast iron pans, steel wool fragments) from the sink promptly to prevent rust spots.

आकृती 3: The R10 curved corners and easy-clean structure design facilitate simple maintenance.

6. समस्या निवारण

7. उत्पादन तपशील

8. हमी आणि समर्थन

For warranty information and customer support, please refer to the product packaging or contact Beleeb customer service directly. Keep your purchase receipt as proof of purchase.

For further assistance, visit the official Beleeb store: Beleeb Store on Amazon