Okin JLDQ.18.137.333D01 Power Recliner Motor Replacement Manual

परिचय

This manual provides detailed instructions for the installation, operation, and maintenance of the Okin JLDQ.18.137.333D01 motor, designed as a replacement part for power recliner lift chairs. Please read this manual thoroughly before attempting any installation or operation to ensure safe and correct usage.

सुरक्षितता माहिती

• Always disconnect power to the recliner before attempting any installation, removal, or maintenance of the motor. Failure to do so can result in electric shock or injury.
• वीजपुरवठा पुनर्संचयित करण्यापूर्वी सर्व कनेक्शन सुरक्षित आणि योग्यरित्या केंद्रित असल्याची खात्री करा.
• This motor is designed for specific power recliner lift chairs. Verify compatibility with your existing recliner model before installation.
• काम करताना हात आणि सैल कपडे हलणाऱ्या भागांपासून दूर ठेवा.
• जर तुम्हाला कोणत्याही पायरीबद्दल खात्री नसेल, तर पात्र तंत्रज्ञांचा सल्ला घ्या.

पॅकेज सामग्री

पॅकेजमध्ये खालील बाबींचा समावेश आहे:

• 1 x Okin JLDQ.18.137.333D01 Refined Motor

Image: The Okin JLDQ.18.137.333D01 motor assembly, showing the main motor unit, linear actuator rod, and attached power and control cables.

उत्पादन संपलेview

The Okin JLDQ.18.137.333D01 is a linear actuator motor designed for power recliner and lift chair applications. It features a robust construction and specific connection types for integration into existing systems.

प्रतिमा: जवळून पाहिलेला फोटो view of the motor's identification label, displaying the model number JLDQ.18.137.333D01, voltage, maximum load, stroke, duty cycle, and various certifications (CE, cURus, TÜV Rheinland, FCC).

कनेक्शनचे प्रकार:

• Power Transformer Connection: 2-pin flat round male plug. This connects to the power supply unit.
• Hand Control Connection: 5-pin female plug. This connects to the recliner's hand control unit.

प्रतिमा: सविस्तर view of the motor's connection cables, highlighting the 5-pin female plug for the hand control and the 2-pin flat round male plug for the power transformer connection.

सेटअप आणि स्थापना

This section outlines the general steps for replacing an existing recliner motor. Always refer to your recliner's specific manual for detailed disassembly and assembly instructions.

1. पॉवर डिस्कनेक्ट करा: Unplug the recliner from the wall outlet to ensure no power is supplied to the motor or controls.
2. मोटरमध्ये प्रवेश करा: Carefully turn the recliner over or tilt it to gain access to the underside where the motor is located. You may need to remove fabric covers or panels.
3. कनेक्शन ओळखा: Note the connections of the existing motor. Typically, there will be a power connection from the transformer and a control connection from the hand remote.
4. जुनी मोटर डिस्कनेक्ट करा: Disconnect the 2-pin power plug and the 5-pin hand control plug from the old motor.
5. जुनी मोटर काढा: Unbolt or unclip the old motor from the recliner frame. Pay attention to how it is mounted.
6. नवीन मोटर बसवा: Position the new Okin JLDQ.18.137.333D01 motor in the same location as the old one. Secure it using the existing bolts or clips. Ensure it is firmly attached.
7. Connect New Motor:
   • Connect the 2-pin flat round male plug from the power transformer to the corresponding port on the new motor.
   • Connect the 5-pin female plug from the hand control to the corresponding port on the new motor.
8. केबल व्यवस्थापनः Route all cables safely, ensuring they are not pinched or in the way of moving parts. Use cable ties if necessary.
9. पुनर्संचयित शक्ती: Once all connections are secure and the motor is properly mounted, plug the recliner back into the wall outlet.
10. चाचणी ऑपरेशन: Use the hand control to test the recliner's functions (recline, lift). Ensure smooth and correct movement.

टीप: Before replacing the motor, always troubleshoot the switch and power supply first. Verify that the new motor's plug types match your recliner's connections.

ऑपरेटिंग सूचना

After successful installation, operate your recliner using the existing hand control unit. The Okin JLDQ.18.137.333D01 motor will respond to the commands from your hand control to adjust the recliner's position.

• Press and hold the appropriate button on your hand control to recline or lift the chair.
• इच्छित स्थितीवर पोहोचल्यावर बटण सोडा.
• Avoid continuous operation for extended periods. The motor has a duty cycle of 1 minute ON / 8 minutes OFF to prevent overheating.

देखभाल

Proper maintenance ensures the longevity and reliable operation of your Okin motor.

• स्वच्छता: Keep the motor and surrounding area free from dust and debris. Use a dry cloth to wipe down the motor housing. Do not use liquid cleaners directly on the motor.
• तपासणी: Periodically inspect all cables and connections for signs of wear, fraying, or damage. Ensure all mounting bolts are tight.
• स्नेहन: The linear actuator rod is typically pre-lubricated. If you notice stiffness or unusual noise, a light application of silicone-based lubricant (avoid petroleum-based products) to the moving rod may be beneficial, but consult a professional if unsure.
• Duty Cycle Adherence: Respect the motor's duty cycle (1 minute ON / 8 minutes OFF) to prevent overheating and premature wear.

समस्यानिवारण

If your recliner is not operating correctly after motor replacement, consider the following common issues:

जर समस्यानिवारण चरणांनी समस्येचे निराकरण झाले नाही, तर अधिक मदतीसाठी ग्राहक समर्थनाशी संपर्क साधा.

तपशील

Image: A graphic summarizing the key product features and specifications, including stroke length, minimum and maximum dimensions, and connection types, alongside an image of the motor.

हमी आणि समर्थन

For warranty information or technical support regarding your Okin JLDQ.18.137.333D01 motor, please refer to the documentation provided with your original recliner or contact Okin customer service directly. You can often find support contact information on the manufacturer's webसाइटवर किंवा तुमच्या उत्पादन विक्रेत्याद्वारे.

पेटंट माहितीसाठी, कृपया भेट द्या dewertokin.com/patents.