I only have 2 of the 4 screws required to attach the handlebar to my MAXSHOT V1PRO Electric Scooter; what type of screws are they and where can I buy replacements?

The manual for the MAXSHOT V1PRO Electric Scooter does not specify the exact thread size or length for the handlebar screws. However, most electric scooters in this class (such as those by MAXSHOT or similar brands) typically use M5 or M6 metric socket head screws.To resolve this, you have three primary options:Contact MAXSHOT Support: The manual states that for spare parts, you should contact their support team directly. They aim to reply within 24 hours. You can reach them through the official MAXSHOT store on Amazon or via the contact details in your purchase documentation.Local Hardware Store: Take one of your remaining two screws to a local hardware store (like Home Depot, Lowe's, or Ace Hardware). Use their thread-matching gauge to identify the exact size (likely M5) and purchase matching metric hex/socket head screws.Amazon/Online: Once you confirm the size (e.g., M5 x 12mm), you can easily find "Electric Scooter Handlebar Screws" online.Warning: Do not ride the scooter with only 2 screws installed, as this can lead to the handlebars becoming loose or detached during operation, posing a significant safety risk.

What should I do when the LED display on my MAXSHOT V1PRO Electric Scooter comes on and keeps beeping?

When the LED display on your MAXSHOT V1PRO Electric Scooter is active and emitting a continuous beeping sound, it usually indicates an error code or a safety alert. Please check the display for a specific error code (such as "E07").Check for Error Code E07: This is a common cause for beeping and indicates that the throttle may be disconnected or damaged. Power off the scooter, check the throttle cable for loose or broken connections, and reconnect it securely.Check the App Lock: If you have used the Tuya Smart app to lock the scooter, it may beep if moved or if there is a connection issue. Ensure the scooter is unlocked via the app.Verify Battery Levels: Low battery voltage can sometimes trigger alerts. Ensure the scooter is fully charged (approximately 4 hours).Inspect Connections: Check all visible wiring near the handlebars and stem to ensure no cables are pinched or partially unplugged.If the beeping persists and no error code is visible, try a hard reset by powering the unit off and on again. If the issue remains, contact MAXSHOT customer support as it may indicate a controller or motor sensor fault covered under your one-year warranty.

Why is my MAXSHOT V1PRO electric scooter showing error code E2 and how do I fix it?

While the MAXSHOT V1PRO manual explicitly lists E07 as a throttle-related error, many electric scooters in this class use E2 (or E02) to indicate a brake lever or brake sensor issue. Since you have already replaced the throttle without success, the error likely points to the braking system's electrical signal.Please try the following steps to resolve the E2 error:Check the Brake Lever: Ensure the brake lever is fully springing back to its original position. If the lever is stuck or slightly pulled, the sensor will trigger an error and prevent the motor from engaging.Inspect Brake Wiring: Look for the thin wire coming out of the brake lever assembly. Trace it down to the main controller and check for any loose, pinched, or disconnected plugs.Disconnect the Brake Sensor: As a test, temporarily unplug the brake sensor wire from the main harness. If the E2 error disappears, the sensor inside the brake lever is faulty and the lever assembly needs replacement.Verify Controller Connections: Since you recently replaced the throttle, ensure that no other wires were accidentally loosened inside the stem or deck during that process.If the error persists after checking the brakes, it may indicate a controller failure. Because your scooter comes with a one-year limited warranty, you should contact MAXSHOT customer service through their official Amazon store or the contact details provided in your purchase documentation for further technical support or spare parts. Note: The manual specifically mentions that E07 is for throttle issues; if your display is definitely showing E2, it is almost certainly related to the brake signal circuit. For more details, you can refer to the MAXSHOT V1PRO User Manual. Warning: Do not ride the scooter if the braking system is malfunctioning or if the error code is active.

How do I reset the MAXSHOT V1PRO Electric Scooter, and what does error code E2 indicate?

Based on the available manual for the MAXSHOT V1PRO, here is the information regarding your request:Error Code E2The provided manual does not explicitly list a definition for E2. However, it does note that E07 refers to a throttle issue. In many similar electric scooter systems, E2 typically indicates a brake lever error (the brake is being held during startup or the sensor is stuck) or a controller communication error. You should check if your brake lever is fully released and ensure all cable connections between the handlebars and the main stem are secure.How to ResetThe manual does not provide a specific "factory reset" button combination. To perform a basic power reset:Press and hold the Power Button on the LED display until the device turns off.Wait at least 30 seconds.Press and hold the Power Button again to turn it back on.If you are using the Tuya Smart app, you may find additional settings or a "Restore Default Settings" option within the app interface. If the error persists, the manufacturer recommends contacting MAXSHOT customer service via their official Amazon store or the contact details provided in your purchase documentation, as they aim to reply within 24 hours.

MAXSHOT V1PRO-dual suspension

An infographic titled 'Your Maxshot V1Pro: Fun, Safe Riding Guide' showing four main sections: Get Started (setup & charge), Go Smart (controls & app), Ride Safe (essentials first), and Keep It Smooth (maintenance tips) for the electric scooter. — Comprehensive guide for the Maxshot V1Pro electric scooter, covering essential steps from initial setup and charging to smart app controls, safety tips like dual braking and lighting, and key maintenance advice for solid tires and tightening screws.

MAXSHOT V1PRO Electric Scooter User Manual

Model: V1PRO-dual suspension | Brand: MAXSHOT

1. परिचय

Welcome to the MAXSHOT V1PRO Electric Scooter user manual. This guide provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new electric scooter. Please read this manual thoroughly before your first ride to ensure optimal performance and safety.

MAXSHOT V1PRO Electric Scooter banner with key features

प्रतिमा: ओव्हरview of the MAXSHOT V1PRO Electric Scooter highlighting its features like long range, top speed, powerful motor, and dual suspension.

2. सुरक्षितता माहिती

Your safety is paramount. The MAXSHOT V1PRO Electric Scooter is designed with safety features and has undergone UL-2272 testing for reliability. Always adhere to local regulations and wear appropriate safety gear, including a helmet.

UL-2272 Certified: The scooter has passed UL-2272 safety standards, ensuring a professional and reliable product.
ड्युअल ब्रेकिंग सिस्टम: Equipped with a responsive dual braking system for enhanced stopping power and safety.
Non-Slip Deck: Provides stable footing during rides.
दृश्यमानता: Features a super bright LED headlight and brake tail light for improved visibility during day and night riding.
वजन मर्यादा: Do not exceed the maximum load of 265 pounds (120 kg).
बॅटरी सुरक्षा: Regularly check the condition of the battery and charging device. Use only the matching battery and correct charging methods. Avoid charging in unventilated or flammable environments.

Electric scooter with front LED light and rear brake light

Image: Illustration of the scooter's triple lighting system, including front LED lights and braking rear lights for safety.

Close-up of electric scooter's rear wheel and dual braking system

Image: Detail of the dual braking system, showing the hand lever and the rear wheel brake mechanism.

3. पॅकेज सामग्री

Upon opening your MAXSHOT V1PRO Electric Scooter package, please verify that all components are present:

MAXSHOT V1PRO Electric Scooter
वापरकर्ता मॅन्युअल
चार्जिंग अडॅप्टर
Assembly Tools (if required for minor assembly)

4. सेटअप

The MAXSHOT V1PRO Electric Scooter comes largely pre-assembled. Follow these steps for quick setup:

स्कूटर उघडा: हँडलबारचा स्टेम सरळ स्थितीत लॉक होईपर्यंत काळजीपूर्वक उचला. फोल्डिंग यंत्रणा सुरक्षितपणे जोडलेली आहे याची खात्री करा.
Attach Handlebars (if separate): If the handlebars are detached, align them with the stem and secure them using the provided screws and tools.
कनेक्शन तपासा: Verify all cables and connections are secure and not pinched.
प्रारंभिक शुल्कः Before first use, fully charge the scooter's battery. The charging time is approximately 4 hours.

Person placing a folded electric scooter into a car trunk

Image: Demonstrates the portable folding design, showing the scooter being easily stored in a car trunk.

5. ऑपरेटिंग सूचना

Familiarize yourself with the scooter's controls and features for a smooth riding experience.

पॉवरिंग चालू/बंद

पॉवर चालू: Press and hold the power button on the LED display.
वीज बंद: डिस्प्ले बंद होईपर्यंत पॉवर बटण पुन्हा दाबा आणि धरून ठेवा.

गती मोड

The scooter offers three speed modes to suit different riding conditions:

इको मोड: Approximately 9 MPH (14.5 km/h) - For maximum range and beginner riders.
स्लो मोड: Approximately 13 MPH (21 km/h) - Balanced speed and range.
स्पोर्ट मोड: Up to 19 MPH (30.5 km/h) - For maximum performance.

Switch between modes using the control button on the display or via the mobile application.

LED Display & Smart Control

The integrated LED display provides real-time information, and the scooter can be controlled via a smartphone application (compatible with iPhone and Android).

स्पीड डिस्प्ले: सध्याचा राइडिंग वेग दाखवते.
बॅटरी लाइफ: उर्वरित बॅटरी चार्ज दर्शवते.
हेडलाइट नियंत्रण: हेडलाइट चालू/बंद करा.
समुद्रपर्यटन नियंत्रण: Activate for consistent speed on long rides.
ब्लूटूथ पेअरिंग: Connect your smartphone to the scooter.
लॉक/अनलॉक: Secure your scooter remotely (note: wheel lock only works when scooter is on).
Customized Speed Limit: Adjust speed settings through the app.
Switch Riding Modes: Change speed modes conveniently from your phone.

Close-up of electric scooter's LED display showing speed, battery, and cruise control indicator

प्रतिमा: तपशीलवार view of the scooter's LED display, showing speed, battery life, headlight indicator, and cruise control.

Smartphone screen showing the electric scooter control app with various functions

Image: Interface of the smart app control, illustrating features like Bluetooth pairing, lock/unlock, headlight control, cruise control, customized speed limit, and riding mode switch.

चार्ज होत आहे

To charge the scooter, connect the charging adapter to the charging port and then to a power outlet. The charging indicator will show charging status. A full charge takes approximately 4 hours, providing a maximum range of 21-28 miles under certain conditions.

Electric scooter with icons for 4 hours charger time and 23 miles range

Image: Visual representation of the scooter's long mileage capability, indicating 4 hours of charging time for a 23-mile range.

6. देखभाल

Regular maintenance ensures the longevity and safe operation of your MAXSHOT V1PRO Electric Scooter.

टायर: The scooter features 8.5-inch honeycomb rubber solid tires, which require no additional maintenance or repair. Periodically inspect them for wear or damage.
ब्रेक: Check the brake cable connection and adjust tension with a wrench if the hand brake feels loose or doesn't work effectively.
बॅटरी काळजी: Always use the provided charger. Avoid overcharging or completely draining the battery. Store the scooter in a cool, dry place when not in use for extended periods.
सामान्य तपासणी: Regularly check and tighten all screws, especially those on the rear wheel, to prevent noise or motor misalignment. Keep the scooter clean and free of dirt and debris.

Close-up of electric scooter's front wheel with dual suspension system

प्रतिमा: तपशीलवार view of the front and rear dual suspension system, highlighting its role in providing a smooth ride.

7. समस्या निवारण

तुम्हाला येणाऱ्या सामान्य समस्यांवरील उपायांसाठी या विभागाचा संदर्भ घ्या.

समस्या	संभाव्य कारण / उपाय
त्रुटी कोड E07	The throttle may be disconnected or damaged. Power off the scooter, check the throttle cable for loose or broken connections, and reconnect or replace if needed.
Rear wheel making noise or not braking well	This may be due to loose screws or motor misalignment. Check and tighten all rear wheel screws.
Hand brake feels loose or doesn't work	Check the brake cable connection and adjust tension with a wrench.
Headlight drains battery quickly	Using the headlight, especially for extended periods, can consume battery power. Use judiciously or consider external lighting for long night rides.
Limited range in Sport (S) mode	Higher speeds and aggressive riding in Sport mode will naturally reduce battery range (typically 5-7 miles on a full charge in S mode). For longer distances, use Eco or Slow mode.
Scooter not waterproof/resistant	The scooter does not have an IPX rating. Avoid riding in wet conditions to prevent damage to electronic components.
Cannot access app features / register scooter	Ensure you have the QR code from the original pamphlet to register your scooter with the Tuya Smart app. Do not discard this pamphlet
Wheel lock via app doesn't work when scooter is off	The wheel lock feature through the app is designed to function only when the scooter is powered on.

8. तपशील

वैशिष्ट्य	तपशील
ब्रँड	MAXSHOT
मॉडेलचे नाव	V1/SPRO/MAX/V1PRO (V1PRO-dual suspension)
मोटर पॉवर	350W ब्रशलेस हब मोटर
कमाल गती	19 एमपीएच (30.5 किमी/ता)
कमाल श्रेणी	21 Miles (under certain conditions)
बॅटरी	36V High-capacity rechargeable and replaceable battery (378Wh)
चार्जिंग वेळ	अंदाजे 4 तास
टायरचा आकार	8.5 इंच
टायर प्रकार	Solid Honeycomb Rubber
निलंबन प्रकार	ड्युअल निलंबन
ब्रेक स्टाइल	Dual Braking (Rear electronic brake + mechanical drum brake)
फ्रेम साहित्य	ॲल्युमिनियम
वजनाची मर्यादा	264 पाउंड (120 किलो)
स्कूटर वजन	अंदाजे १.१ पौंड (०.५ किलो)
विशेष वैशिष्ट्ये	Digital Display, Dual Braking System, Lightweight, Cruise Control, Foldable, APP Control
शिफारस केलेले वापर	प्रवास करणे

Electric scooter with 350W powerful motor, showing 19MPH top speed and 15% uphill climbing

Image: Illustration of the 350W powerful motor, detailing its capabilities including 19 MPH top speed and 15% uphill climbing ability.

9. हमी आणि समर्थन

MAXSHOT is committed to providing quality products and excellent customer service.

हमी: Your MAXSHOT V1PRO Electric Scooter comes with a one-year limited warranty. This warranty covers manufacturing defects and issues arising from normal use.
ग्राहक समर्थन: If you encounter any problems with your product or have questions, please contact MAXSHOT customer service. We aim to reply to all inquiries within 24 hours.
सुटे भाग: For information on obtaining spare parts, please contact our support team directly.

For the most up-to-date support information, please visit the official MAXSHOT store on Amazon or refer to the contact details provided with your purchase documentation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.