परिचय
This manual provides detailed instructions for the assembly, operation, and maintenance of your ErGear Dual Monitor Stand. Please read this manual thoroughly before installation and keep it for future reference. Proper installation and use will ensure optimal performance and safety.
सुरक्षितता माहिती
- असेंब्लीपूर्वी सर्व घटक उपस्थित आहेत आणि त्यांना नुकसान झालेले नाही याची खात्री करा. जर कोणतेही भाग गहाळ किंवा दोषपूर्ण असतील तर वापरू नका.
- Verify that your desk surface can support the combined weight of the stand and two monitors.
- Adhere strictly to the specified monitor size and weight limits to prevent instability or damage.
- Tighten all screws firmly, but do not overtighten to avoid stripping threads.
- स्थापना दरम्यान मुले आणि पाळीव प्राणी दूर ठेवा.
- Always seek professional assistance if you are unsure about any part of the installation process.
पॅकेज सामग्री
Please check that all parts are included in your package:
- मुख्य ध्रुव
- Monitor Arms (2)
- सी-सीएलamp बेस
- ग्रोमेट माउंट बेस
- VESA प्लेट्स (३)
- Hardware Kit (screws, washers, Allen wrenches)
- केबल व्यवस्थापन क्लिप
तपशील
| माउंटिंग प्रकार | Tabletop Mount (C-Clamp or Grommet) |
| हालचाली प्रकार | Swivel, Tilt, Rotation |
| साहित्य | मिश्र धातु स्टील |
| रंग | काळा |
| सुसंगत साधने | मॉनिटर्स |
| किमान स्क्रीन आकार | 17 इंच |
| कमाल स्क्रीन आकार | 32 इंच |
| प्रति हात वजन क्षमता | 4.4 to 22 lbs (2-10 kg) |
| VESA सुसंगतता | 75x75 मिमी, 100x100 मिमी |
| सी-सीएलamp डेस्क जाडी | 0.39"-3.15" (10-80mm) |
| Grommet Mount Desk Thickness | 0.4"-2.17" (10-55mm) |
The stand features a 16.54" tall pole and a maximum arm length of 37.8" (from center pole to monitor center).
सुसंगतता
Before installation, ensure your monitors meet the following criteria:
- स्क्रीन आकार: Each monitor must be between 17 and 32 inches.
- वजन: Each monitor must weigh between 4.4 lbs (2 kg) and 22 lbs (10 kg).
- VESA नमुना: The back of each monitor must have VESA mounting holes with a pattern of either 75x75mm or 100x100mm.
सेटअप
The ErGear Dual Monitor Stand offers two mounting options: C-Clamp and Grommet Mount.
तुमची माउंटिंग पद्धत निवडणे
सी-सीएलamp स्थापना
- C-Cl संलग्न कराamp base to the bottom of the main pole using the provided screws.
- C-Cl ला स्थान द्याamp on the edge of your desk. Ensure the desk thickness is between 0.39" and 3.15".
- cl घट्ट कराamp securely until the stand is stable.
Grommet माउंट स्थापना
- If your desk has a grommet hole, remove its cover. Ensure the desk thickness is between 0.4" and 2.17".
- Assemble the grommet mount components as per the instructions in the hardware kit.
- Insert the grommet bolt through the desk hole and secure it from underneath with the provided plate and nut.
Attaching Monitors
- Attach the VESA plates to the back of your monitors using the appropriate screws from the hardware kit.
- Slide the assembled monitor arms onto the main pole at your desired height and secure them.
- Carefully lift each monitor and slide its VESA plate onto the corresponding monitor arm bracket. Ensure it clicks into place or is secured with the locking mechanism.
- Adjust the tension screws on the VESA plate to prevent the monitor from tilting freely.
केबल व्यवस्थापन
Utilize the integrated cable management clips on the arms and main pole to route your monitor cables neatly. This helps maintain an organized workspace.
ऑपरेटिंग समायोजन
The ErGear Dual Monitor Stand offers flexible adjustments for optimal viewसांत्वन.
उंची समायोजन
The monitor arms can be moved up or down along the central pole. Loosen the securing knob on the pole, adjust the arms to the desired height, and then retighten the knob firmly.
टिल्ट समायोजन
Monitors can be tilted -45° to +65°. Loosen the tilt screw on the VESA plate, adjust the monitor to your preferred angle, and then tighten the screw.
कुंडा समायोजन
Each monitor arm can swivel ±90° at multiple joints, allowing you to angle your monitors independently.
रोटेशन समायोजन
Monitors can be rotated 360° from landscape to portrait orientation. Simply rotate the monitor to the desired orientation.
Fine-Tuning Screen Alignment
The stand allows for micro height adjustments (0.19" / 5mm steps) to ensure perfect alignment between two monitors, even if they are of different models or sizes.
देखभाल
- सर्व स्क्रू आणि कनेक्शन घट्ट आणि सुरक्षित राहतील याची खात्री करण्यासाठी नियमितपणे तपासा.
- स्टँड मऊ करून स्वच्छ करा, डीamp कापड. अपघर्षक क्लीनर किंवा सॉल्व्हेंट्स टाळा.
- Periodically inspect the monitor arms for any signs of wear or damage.
समस्यानिवारण
| इश्यू | संभाव्य कारण | उपाय |
| Monitor sags or does not hold position | Monitor weight exceeds capacity; tilt screw is loose. | Verify monitor weight is within 4.4-22 lbs. Tighten the tilt screw on the VESA plate. |
| स्टँड अस्थिर आहे. | सी-सीएलamp or Grommet mount is not tightened sufficiently. | Ensure the C-Clamp or Grommet mount is securely fastened to the desk. Check desk thickness compatibility. |
| Monitors are not level | Arms are not at the same height; micro-adjustment needed. | Adjust the height of each arm on the main pole. Use the micro height adjustment feature for fine-tuning. |
हमी आणि समर्थन
The ErGear Dual Monitor Stand comes with a 2 वर्षाची वॉरंटी from the date of purchase. This warranty covers manufacturing defects and material flaws under normal use. For warranty claims, technical support, or any questions regarding your product, please contact ErGear customer service through the retailer where you purchased the product or visit the official ErGear webसंपर्क माहितीसाठी साइट.