VEVOR Gas Pressure Washer 170D User Manual

1. परिचय

Thank you for choosing the VEVOR Gas Pressure Washer Model 170D. This manual provides essential information for the safe and efficient operation, assembly, maintenance, and troubleshooting of your pressure washer. Please read this manual thoroughly before operating the unit to ensure proper use and to prevent injury or damage.

This gas-powered pressure washer is designed for various cleaning tasks, offering a maximum pressure of 3400 PSI (239.04 kgf/cm²) and a flow rate of 10 L/min. It is suitable for cleaning vehicles, fences, patios, driveways, and other outdoor surfaces.

Figure 1.1: VEVOR Gas Pressure Washer 170D in use, demonstrating its powerful water spray for effective cleaning.

2. सुरक्षितता माहिती

Always observe basic safety precautions when using this product to reduce the risk of injury or damage. Failure to follow these instructions may result in serious injury or property damage.

2.1 सामान्य सुरक्षा चेतावणी

• संपूर्ण मॅन्युअल वाचा: Understand all operating instructions and warnings before use.
• योग्य सुरक्षा उपकरणे घाला: Always wear eye protection (safety glasses or goggles), hearing protection, and protective clothing.
• मुलांना आणि पाळीव प्राण्यांना दूर ठेवा: Do not allow children or untrained individuals to operate the pressure washer.
• Operate in a well-ventilated area: The engine produces carbon monoxide, which is a colorless, odorless, and poisonous gas.
• Fuel handling: Handle gasoline with extreme care. Store fuel in approved containers and never refuel a hot or running engine.
• High-pressure spray: Never direct the spray at people, animals, electrical devices, or the unit itself. The high pressure can cause severe injury.
• स्थिर पृष्ठभाग: टिपिंग टाळण्यासाठी प्रेशर वॉशर स्थिर, समतल पृष्ठभागावर चालवा.
• नुकसान तपासा: Before each use, inspect the unit, hoses, and nozzles for any damage. Do not operate if damaged.

3. पॅकेज सामग्री

खाली सूचीबद्ध केलेल्या सर्व वस्तू तुमच्या पॅकेजमध्ये समाविष्ट आहेत याची पडताळणी करा. जर कोणतेही भाग गहाळ किंवा खराब झाले असतील तर VEVOR ग्राहक सेवेशी संपर्क साधा.

• Gas Pressure Washer Unit (main body with engine and pump)
• High-Pressure Hose (26 ft / 8 m)
• स्प्रे गन
• कांडी
• Quick-Connect Nozzles (5 types: 0°, 15°, 25°, 40°, Soap Nozzle)
• चाके (2)
• विधानसभा हाताळा
• 8-10 Wrench (1)
• फिलिप्स स्क्रूड्रिव्हर (1)
• Spark Plug Socket and Socket Bar (1)

आकृती 3.1: ओव्हरview of the VEVOR Gas Pressure Washer 170D and its included accessories.

१. सेटअप आणि असेंब्ली

तुमचा प्रेशर वॉशर एकत्र करण्यासाठी आणि पहिल्या वापरासाठी तयार करण्यासाठी या चरणांचे अनुसरण करा.

4.1 विधानसभा

1. चाके जोडा: Securely attach the two wheels to the main frame using the provided hardware.
2. हँडल स्थापित करा: Slide the handle assembly into the designated slots on the main unit and secure it with the locking pins or bolts.
3. उच्च-दाबाची नळी जोडा: Connect one end of the high-pressure hose to the pump outlet on the pressure washer and the other end to the spray gun. Ensure connections are tight.
4. कांडी जोडा: Connect the spray wand to the spray gun.

४.२ इंधन आणि तेल

The engine is shipped without oil or fuel. You must add both before starting the unit.

• इंजिन तेल घाला: Remove the oil fill cap/dipstick. Add the recommended engine oil (refer to engine manual for type and capacity) until it reaches the full mark on the dipstick. Do not overfill.
• पेट्रोल जोडा: Fill the fuel tank with fresh, unleaded gasoline (minimum 87 octane). Do not overfill. Leave space for fuel expansion.

4.3 पाणी कनेक्शन

• प्रेशर वॉशरवरील पाण्याच्या इनलेटला बागेतील नळी (किमान ५/८ इंच व्यासाची) जोडा.
• Ensure the garden hose is free of kinks and has a steady water supply.
• पाणीपुरवठा पूर्णपणे चालू करा.
• Squeeze the trigger on the spray gun to purge air from the pump and hose until a steady stream of water emerges. This prevents damage to the pump.

आकृती 4.1: तपशीलवार view of the 210cc 4-stroke engine and axial cam pump, highlighting key components for setup.

5. ऑपरेटिंग सूचना

तुमच्या प्रेशर वॉशरच्या सुरक्षित आणि प्रभावी ऑपरेशनसाठी या चरणांचे अनुसरण करा.

5.1 इंजिन सुरू करणे

1. Ensure the water supply is fully on and all air is purged from the system.
2. इंजिन स्विच "चालू" स्थितीत करा.
3. Move the choke lever to the "CHOKE" position (cold engine).
4. Move the fuel valve to the "ON" position.
5. इंजिन सुरू होईपर्यंत रिकोइल स्टार्टर हँडल घट्ट खेचा.
6. इंजिन सुरू झाल्यावर, चोक लीव्हर हळूहळू "RUN" स्थितीत हलवा.

५.३ नोजल्स वापरणे

The pressure washer comes with 5 quick-connect nozzles for various applications.

• ०° लाल नोजल: Concentrated, high-impact jet for tough stains and hard-to-reach areas. Use with extreme caution.
• १५° पिवळा नोजल: Narrow spray for intensive cleaning of small areas.
• २५° हिरवा नोजल: Medium spray for general cleaning of most surfaces.
• 40° पांढरी नोजल: Wide spray for gentle cleaning of delicate surfaces.
• काळा साबण नोजल: डिटर्जंट लावण्यासाठी कमी दाबाचा स्प्रे.

To change nozzles, pull back the collar on the quick-connect fitting at the end of the wand, insert the desired nozzle, and release the collar. Ensure the nozzle is securely seated before operating.

Figure 5.1: The five quick-connect nozzles and their corresponding spray angles and applications.

५.३ डिटर्जंटचा वापर

• Fill the detergent tank with pressure washer safe detergent.
• Attach the black soap nozzle to the spray wand.
• Start the engine and squeeze the trigger. The detergent will be drawn from the tank and mixed with the water at low pressure.
• After applying detergent, switch to a high-pressure nozzle (e.g., 25° or 15°) to rinse the surface thoroughly.

5.4 बंद करणे

1. इंजिन स्विच बंद करा.
2. इंधन वाल्व बंद करा.
3. पाणी पुरवठा बंद करा.
4. सिस्टीममध्ये उरलेला दाब सोडण्यासाठी स्प्रे गन ट्रिगर दाबा.
5. बागेची नळी आणि उच्च दाबाची नळी डिस्कनेक्ट करा.

Figure 5.2: The extended reach provided by the 26 ft (8 m) high-pressure hose, allowing for versatile cleaning applications.

6. देखभाल

Regular maintenance ensures optimal performance and extends the life of your pressure washer. Always disconnect the spark plug wire before performing any maintenance.

6.1 इंजिन देखभाल

• इंजिन ऑइल तपासा: प्रत्येक वापरापूर्वी तेलाची पातळी तपासा. ऑपरेशनच्या पहिल्या २० तासांनंतर, नंतर दर १०० तासांनी किंवा दरवर्षी तेल बदला.
• स्वच्छ एअर फिल्टर: Inspect the air filter every 25 hours or more often in dusty conditions. Clean or replace as needed.
• स्पार्क प्लग तपासा: Inspect the spark plug annually or every 100 hours. Clean or replace if necessary.

6.2 पंप देखभाल

• स्वच्छ पाण्याचा इनलेट फिल्टर: Regularly check and clean the screen filter on the water inlet to prevent debris from entering the pump.
• हिवाळीकरण: If storing the pressure washer in freezing temperatures, use a pump protector or RV antifreeze to prevent damage to the pump.

6.3 Hose and Nozzle Maintenance

• नळी तपासा: Regularly check the high-pressure hose and garden hose for cuts, leaks, or damage. Replace if necessary.
• स्वच्छ नोजल: If a nozzle becomes clogged, use the included nozzle cleaning tool to clear any obstructions.

7. समस्या निवारण

हा विभाग तुम्हाला येऊ शकणाऱ्या सामान्य समस्यांचे निराकरण प्रदान करतो.

8. तपशील

Technical specifications for the VEVOR Gas Pressure Washer Model 170D.

• ब्रँड: VEVOR
• मॉडेल: 170D
• उर्जा स्त्रोत: पेट्रोलवर चालणारे
• इंजिन: 210cc 4-stroke, 7 HP
• कमाल दबाव: 3400 PSI (239.04 kgf/cm²)
• कमाल प्रवाह दर: 10 एल/मिनिट
• उच्च दाबाच्या नळीची लांबी: 26 फूट (8 मी)
• नोजल: 5 Quick-Connect (0°, 15°, 25°, 40°, Soap Nozzle)
• उत्पादनाचे परिमाण (L x W x H): ९.४ x ५.६ x २.५९ सेमी (३.७ x २.२१ x १.०२ इंच)
• आयटम वजन: 58.03 एलबीएस (26.32 किलो)
• UPC: 197988808220

Figure 8.1: Dimensional drawing and key specifications of the VEVOR Gas Pressure Washer 170D.

9. हमी आणि समर्थन

For warranty information, technical support, or to order replacement parts, please contact VEVOR customer service. Keep your purchase receipt and product model number handy for faster service.

तुम्हाला सामान्यतः VEVOR अधिकाऱ्यावर समर्थन संपर्क माहिती मिळू शकते. webसाइटवर किंवा तुमच्या किरकोळ विक्रेत्याद्वारे.