Saooer Solar Charge Controller 12V/24V 30A User Manual

1. परिचय

This manual provides essential instructions for the safe and efficient operation of your Saooer Solar Charge Controller. This device is designed to manage the power flow from your solar panel to your battery, ensuring optimal charging and protecting your battery from overcharge and over-discharge. It is compatible with both 12V and 24V solar systems and features a 30A discharge current capacity.

2. सुरक्षितता सूचना

Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in damage to the controller, battery, or other components, and may cause personal injury.

• बॅटरी व्हॉल्यूमची खात्री कराtage is sufficient for the controller to recognize the battery type before the first installation.
• The charge controller is suitable for lead-acid batteries (OPEN, AGM, GEL) and lithium-ion batteries. Do not use it for other battery types.
• Install the charge controller indoors, away from direct sunlight, high temperatures, and humid environments.
• ऑपरेशन दरम्यान कंट्रोलर गरम होईल; चांगले वायुवीजन सुनिश्चित करा.
• The controller's positive and negative terminals should be connected correctly. Reverse connection may damage the device.
• Always connect the battery first, then the solar panel, and finally the load. Disconnect in the reverse order: load, then solar panel, then battery.

3. उत्पादनाची वैशिष्ट्ये

• प्रणाली खंडtagई सुसंगतता: Automatically detects 12V or 24V systems.
• डिस्चार्ज करंट: 30A क्षमता.
• Integrated Micro Controller: Manages solar panel and battery operation efficiently.
• ड्युअल यूएसबी पोर्टः Supports mobile phone charging (5V/2A output).
• सर्वसमावेशक संरक्षण: Includes short-circuit protection, open-circuit protection, reverse polarity protection, and over-load protection to enhance system efficiency and battery lifespan.
• एलसीडी डिस्प्ले: Provides clear indication of status and data, allowing for convenient mode switching and parameter configuration.
• समायोज्य पॅरामीटर्स: User-configurable settings for various battery types and operational needs.
• अंगभूत टाइमरः For load control.

4. पॅकेज सामग्री

• 1x Saooer Solar Charge Controller (30A)

5. सेटअप आणि स्थापना

Follow these steps for proper installation of the solar charge controller. Incorrect connection order can damage the controller.

1. बॅटरी कनेक्ट करा: Connect the battery to the charge regulator first. Ensure correct polarity (positive to positive, negative to negative). This allows the controller to recognize the battery voltage.
2. सोलर पॅनेल कनेक्ट करा: Connect the solar panel to the solar charge controller. Ensure correct polarity.
3. लोड कनेक्ट करा: Connect the consumer or load to the charge controller regulator. Ensure correct polarity.

Important Disconnection Note:

When disconnecting the system, always remove the solar panel connection first, then the load connection, and finally the battery connection. This prevents potential damage to the controller.

6. ऑपरेटिंग सूचना

The controller features an LCD display and three buttons for operation: मेनू, UP, आणि खाली.

6.1. एलसीडी डिस्प्ले

The LCD display shows real-time system status and data, including battery voltage, charging current, discharging current, and various parameter settings.

6.2. बटण कार्ये

• मेनू बटण: Press to cycle through different display modes and enter parameter setting mode. Long press to exit setting mode.
• यूपी बटण: In setting mode, press to increase the parameter value.
• डाउन बटण: In setting mode, press to decrease the parameter value.

6.3. पॅरामीटर सेटिंग्ज

To adjust parameters (e.g., battery type, charge/discharge voltage limits, load timer settings):

1. दाबा मेनू button until the desired parameter display appears.
2. लांब दाबा मेनू प्रदर्शित मूल्य चमकू लागेपर्यंत बटण दाबा.
3. वापरा UP आणि खाली मूल्य समायोजित करण्यासाठी बटणे.
4. Once the desired value is set, long press the मेनू सेटिंग सेव्ह करण्यासाठी आणि फ्लॅशिंग स्थितीतून बाहेर पडण्यासाठी पुन्हा बटण दाबा.

Refer to the specific icons on the LCD for detailed parameter identification.

7. देखभाल

नियमित देखभालीमुळे तुमच्या सौर चार्ज कंट्रोलरचे दीर्घायुष्य आणि इष्टतम कामगिरी सुनिश्चित होते.

• स्वच्छता: कंट्रोलर स्वच्छ आणि धूळ आणि कचऱ्यापासून मुक्त ठेवा. स्वच्छतेसाठी कोरड्या कापडाचा वापर करा.
• कनेक्शन: Periodically check all wiring connections to ensure they are tight and free from corrosion. Loose connections can cause power loss and overheating.
• वायुवीजन: Ensure the installation area has adequate ventilation to prevent overheating of the controller.
• तपासणी: Inspect the controller for any signs of physical damage or unusual operation.

8. समस्या निवारण

If you encounter issues with your solar charge controller, consider the following common troubleshooting steps:

• डिस्प्ले नाही/पॉवर नाही: बॅटरी कनेक्शन तपासा आणि बॅटरीमध्ये पुरेसा व्हॉल्यूम असल्याची खात्री कराtage. सर्व वायरिंग योग्य आणि सुरक्षित असल्याची खात्री करा.
• बॅटरी चार्ज होत नाही: सौर पॅनल कनेक्शन तपासा आणि पॅनलला पुरेसा सूर्यप्रकाश मिळत आहे याची खात्री करा. सौर पॅनल व्हॉल्यूम तपासा.tage and current. Ensure the controller's charging parameters are correctly set for your battery type.
• लोड काम करत नाही: Check load connections. Ensure the load is not exceeding the controller's rated current. Check the load timer settings if applicable. The controller may have entered protection mode due to over-discharge or over-load; check the display for error codes or indicators.
• ओव्हर-व्हॉलtagई/अंडर-वॉल्यूमtage Alarms: बॅटरी व्हॉल्यूम तपासाtage. Ensure solar panel open-circuit voltage does not exceed the controller's maximum input voltage.

If the problem persists after performing these checks, please contact customer support.

9. तपशील

10. हमी आणि समर्थन

For warranty information, please refer to the documentation provided with your purchase or contact your retailer. For technical support or inquiries, please contact Saooer customer service through their official channels.