RHINO DISBEF-3T Triple Tank Cold Beverage Dispenser Instruction Manual

परिचय

Thank you for choosing the RHINO DISBEF-3T Triple Tank Cold Beverage Dispenser. This manual provides essential information for the safe and efficient operation, installation, maintenance, and troubleshooting of your new appliance. Please read this manual thoroughly before using the dispenser and retain it for future reference.

प्रतिमा: समोर view of the RHINO DISBEF-3T Triple Tank Cold Beverage Dispenser, showcasing its three clear tanks and stainless steel base with dispensing levers.

महत्त्वाच्या सुरक्षितता सूचना

• वापरण्यापूर्वी सर्व सूचना वाचा.
• वीज पुरवठा रेटिंग लेबलवरील वैशिष्ट्यांशी जुळत असल्याची खात्री करा.
• उपकरण, कॉर्ड किंवा प्लग पाण्यात किंवा इतर द्रवांमध्ये बुडवू नका.
• मुले उपकरणाशी खेळत नाहीत याची खात्री करण्यासाठी त्यांचे निरीक्षण करा.
• वापरात नसताना आणि साफ करण्यापूर्वी आउटलेटमधून अनप्लग करा.
• खराब झालेल्या कॉर्ड किंवा प्लगने किंवा उपकरणामध्ये बिघाड झाल्यानंतर किंवा कोणत्याही प्रकारे नुकसान झाल्यानंतर कोणतेही उपकरण चालवू नका.
• फक्त उत्पादकाने शिफारस केलेले संलग्नक वापरा.
• घराबाहेर वापरू नका.
• टेबल किंवा काउंटरच्या काठावर कॉर्ड लटकू देऊ नका किंवा गरम पृष्ठभागांना स्पर्श करू नका.
• उपकरण नेहमी स्थिर, समतल पृष्ठभागावर ठेवा.
• हे उपकरण व्यावसायिक वापरासाठी आहे.

उत्पादन घटक

The RHINO DISBEF-3T dispenser consists of the following main components:

• बेस युनिट: Contains the cooling system and electrical components, made of stainless steel.
• Beverage Tanks (x3): Transparent, food-grade polycarbonate tanks, each with an 18-liter capacity.
• Lids (x3): Covers for each beverage tank.
• Dispensing Levers (x3): "Push" type levers for controlled beverage flow.
• Drip Trays (x3): Removable trays located below each dispensing lever to catch spills.
• Agitation System: Fountain-type agitators within each tank to keep beverages mixed and chilled.

Image: An illustrative diagram highlighting key features of the dispenser, including triple tanks, polycarbonate construction, stainless steel cabinet, 680W power, and 18 liters per tank capacity.

सेटअप आणि स्थापना

1. अनपॅक करणे: डिस्पेंसर त्याच्या पॅकेजिंगमधून काळजीपूर्वक काढा. कोणतेही नुकसान झाले आहे का ते तपासा.
2. प्लेसमेंट: Place the dispenser on a stable, level, and dry surface. Ensure there is adequate ventilation around the unit, especially at the rear and sides, to allow for proper heat dissipation from the cooling system.
3. स्वच्छता: Before first use, thoroughly clean all removable parts (tanks, lids, drip trays, agitators) with mild soap and water. Rinse thoroughly and dry.
4. विधानसभा:
   • Insert the agitators into their respective positions within the base unit.
   • Place the clean beverage tanks onto the base unit, ensuring they are securely seated.
   • Attach the lids to the tanks.
   • Position the drip trays under each dispensing lever.
5. वीज कनेक्शन: Plug the power cord into a grounded electrical outlet that matches the appliance's voltage and frequency (680W power requirement).

ऑपरेटिंग सूचना

1. Filling Tanks: Open the lids and pour your desired cold beverages into each of the three 18-liter tanks. Do not overfill.
2. पॉवर चालू: Locate the power switch (usually on the side or rear of the base unit) and turn the dispenser ON.
3. Cooling and Agitation: The cooling system will begin to chill the beverages, and the fountain-type agitation system will start mixing the contents to maintain an even temperature and prevent settling. This process may take some time depending on the initial temperature of the beverages.
4. वितरण: To dispense a beverage, place a cup under the desired dispensing lever and press the lever inward. Release the lever to stop the flow.
5. देखरेख पातळी: Regularly check beverage levels in the transparent tanks and refill as needed.

प्रतिमा: जवळून पाहिलेला फोटो view of the three "PUSH" dispensing levers on the front of the stainless steel base, indicating how to operate them.

प्रतिमा: जवळून पाहिलेला फोटो view of the three removable drip trays located beneath the dispensing levers, designed to catch any spills.

स्वच्छता आणि देखभाल

Regular cleaning and maintenance are crucial for the longevity and hygienic operation of your dispenser.

1. दैनंदिन स्वच्छता:
   • Turn off and unplug the dispenser.
   • Empty any remaining beverages from the tanks.
   • Remove the tanks, lids, agitators, and drip trays.
   • Wash these removable parts with warm, soapy water. Use a soft brush for agitators if needed.
   • स्वच्छ पाण्याने चांगले धुवा आणि हवेत पूर्णपणे कोरडे होऊ द्या.
   • Wipe down the exterior of the base unit with a damp cloth. Do not use abrasive cleaners or immerse the base unit in water.
2. नियतकालिक देखभाल:
   • नुकसानीच्या कोणत्याही चिन्हासाठी पॉवर कॉर्ड तपासा.
   • Ensure ventilation openings on the base unit are clear of dust and debris.

समस्यानिवारण मार्गदर्शक

तपशील

Image: A diagram illustrating the dimensions of the dispenser: 70 cm width, 40 cm depth, and 73 cm height, with a total weight of 48 kg.

हमी आणि समर्थन

For warranty information, technical support, or service inquiries, please contact RHINO customer service. Keep your purchase receipt as proof of purchase for warranty claims.

Refer to the official RHINO webविशिष्ट संपर्क तपशील आणि वॉरंटी अटींसाठी साइट किंवा तुमच्या खरेदी दस्तऐवजीकरणाचा संदर्भ घ्या.