Winees WiFi Water Leak Detector S1 Lite Instruction Manual

1. उत्पादन संपलेview

The Winees WiFi Water Leak Detector S1 Lite is designed to provide real-time water leak detection and alerts, helping to prevent potential water damage in your home. This system includes a central hub and compact water sensors that communicate wirelessly.

Image: Winees S1 Lite Water Leak Detector Hub and Sensor.

• रिमोट मॉनिटरिंग: Connect the hub to 2.4G WiFi for real-time monitoring via a mobile application.
• Wide Transmission Range: Sensors can communicate with the hub up to 100 meters (328 feet) away, even in basements.
• त्वरित सूचना: Receive alerts via the app, email, and SMS when a water leak is detected.
• Adjustable Alarm: The hub features a 100dB alarm with high, medium, and low volume settings, and an instant mute function.
• Compact & Waterproof Sensors: Sensors are only 1.8mm thick, IP66 waterproof, and designed for placement in hidden corners.
• IFTTT Compatible: Integrates with IFTTT for enhanced smart home automation.

२. बॉक्समध्ये काय आहे?

Your Winees WiFi Water Leak Detector S1 Lite package includes the following components:

• 1 x Wi-Fi Hub
• 1 x Water Leak Sensor
• 1 x CR2450 Battery (pre-installed in sensor)
• 1 x Battery Cover Tool
• 1 x द्रुत प्रारंभ मार्गदर्शक

Image: The Winees S1 Lite package contents, showing the hub, a sensor, and the quick start guide.

४. सेटअप सूचना

3.1 Download the AiDot App

1. साठी शोधा "AiDot" in your smartphone's app store (iOS or Android).
2. अनुप्रयोग डाउनलोड आणि स्थापित करा.
3. Create an account and follow the in-app instructions to confirm your email.

3.2 Activate the Sensor Battery

Before use, activate the sensor by removing the plastic insulation tab from the battery compartment.

1. Use the supplied battery cover tool or a coin to gently twist and open the back cover of the sensor.
2. Remove the plastic insulation tab covering the CR2450 battery.
3. बॅटरी कव्हर सुरक्षितपणे बंद असल्याची खात्री करून ते बदला.

Image: Activating the sensor battery by removing the plastic tab.

3.3 Plug in the Wi-Fi Hub

Plug the Wi-Fi hub into a standard electrical outlet in an area with good 2.4G WiFi signal coverage. The hub will automatically enter pairing mode.

3.4 Add Devices to the App

The water leak sensor is pre-paired with the hub by default. If you need to add additional sensors or re-pair, follow these steps:

1. Open the AiDot app and navigate to "My Home".
2. Tap "Add Device" or the '+' icon.
3. Scan the QR code located on the back of each sensor.
4. Follow the on-screen prompts to assign the sensor to a room (e.g., Kitchen, Laundry Room, Basement) for easy identification.

Image: Direct pre-pairing between the hub and sensor for simplified setup.

4. ऑपरेटिंग सूचना

4.1 सेन्सर प्लेसमेंट

Place the water leak sensors in areas prone to water leaks, ensuring they lie flat on the ground. Common locations include:

• सिंकखाली (स्वयंपाकघर, बाथरूम)
• वॉशिंग मशीन किंवा डिशवॉशर जवळ
• तळघर किंवा उपयुक्तता खोल्यांमध्ये
• Near water heaters or sump pumps

Image: The 1.8mm thin sensor can be placed discreetly in any corner.

Image: Connect multiple sensors throughout your home for comprehensive coverage.

4.2 Receiving Alerts

When a water leak is detected, the system will trigger multiple alert modes:

• श्रवणीय अलार्म: The hub will sound a 100dB alarm.
• अ‍ॅप सूचना: Receive instant push notifications on your smartphone via the AiDot app.
• Email & SMS: Configured email addresses and phone numbers will receive alerts.

Image: Multiple notification methods ensure you are always informed of a leak.

१८ अलार्म नियंत्रण

• आवाज समायोजित करा: The hub has buttons to adjust the alarm volume (high/medium/low).
• अलार्म म्यूट करा: Press any button on the hub or use the AiDot app to instantly mute the alarm.
• अलार्म कालावधी: Configure alarm duration settings (always ringing, 10 minutes, 1 minute, 30 seconds) via the app.

Image: Adjustable volume settings for the hub alarm.

Image: One-key function to turn off the alarm.

३.३ अधिकृत उत्पादन व्हिडिओ

Video: An official product video from Winees demonstrating the S1 Plus Water Leak Detector's features and benefits.

5. देखभाल

5.1 बॅटरी बदलणे

The water leak sensor uses a CR2450 Lithium-Ion battery. The battery life is approximately 365 days. When the battery is low, the app will notify you. To replace the battery:

1. Use the supplied battery cover tool or a coin to gently twist and open the back cover of the sensor.
2. जुनी CR2450 बॅटरी काढा.
3. पॉझिटिव्ह (+) बाजू वर तोंड करून नवीन CR2450 बॅटरी घाला.
4. बॅटरी कव्हर सुरक्षितपणे बंद असल्याची खात्री करून ते बदला.

6. समस्या निवारण

If you encounter issues with your Winees WiFi Water Leak Detector S1 Lite, consider the following:

• कोणतेही अलर्ट नाहीत: Ensure the hub is connected to a stable 2.4G WiFi network and the sensors are within the 100m transmission range. Check app notification settings and email/SMS spam folders.
• खोटे अलार्म: Verify that sensors are placed on a dry, flat surface and not in areas prone to condensation or accidental splashes.
• कनेक्टिव्हिटी समस्या: Restart the Wi-Fi hub and your home router. Ensure the hub is placed in an area with strong WiFi signal.
• सेन्सर प्रतिसाद देत नाही: Check the sensor battery level in the app. If low, replace the battery. Re-pair the sensor with the hub if necessary.

For further assistance, refer to the detailed troubleshooting section in the AiDot app or contact Winees customer support.

7. तपशील

8. हमी आणि समर्थन

Winees is committed to providing high-quality products and customer satisfaction.

• ३० दिवसांची परतफेड धोरण: Enjoy a 30-day return window with no questions asked.
• 24-Month Unconditional Replacement: Products are eligible for unconditional replacement within 24 months of purchase.
• आजीवन हमी: Winees provides permanent service and technical support for its products.
• 24-Hour Quick Response: Expect a quick response to your inquiries within 24 hours.

For support, please visit the official Winees webसाइटवर जा किंवा त्यांच्या ग्राहक सेवा टीमशी थेट संपर्क साधा.