Prexiso 11.5-inch Digital Level, 10-inch Torpedo Level

Prexiso WORKPRO 11.5-inch Digital Level and 10-inch Torpedo Level Instruction Manual

Model: 11.5-inch Digital Level, 10-inch Torpedo Level

परिचय

Thank you for choosing the Prexiso WORKPRO 11.5-inch Digital Level and 10-inch Torpedo Level. This manual provides essential information for the safe and effective operation, maintenance, and care of your new measuring tools. Please read this manual thoroughly before use and retain it for future reference.

सुरक्षितता माहिती

  • Always handle tools with care to prevent damage or injury.
  • Keep the tools clean and dry to ensure accurate readings and prolong lifespan.
  • Do not expose the digital level to extreme temperatures or moisture.
  • Store tools in a safe place, out of reach of children.

पॅकेज सामग्री

तुमच्या पॅकेजमध्ये खालील आयटम असावेत:

  • 1 x Prexiso 11.5-inch Digital Level
  • 1 x WORKPRO 10-inch Torpedo Level
  • सूचना पुस्तिका (हा दस्तऐवज)

उत्पादन संपलेview आणि वैशिष्ट्ये

1. Prexiso 11.5-inch Digital Level

This digital level provides precise angle measurements with a clear LCD display.

  • तेजस्वी एलसीडी डिस्प्ले: Large, bright green LCD for enhanced visibility in various lighting conditions.
  • Automatic Display Reversal: The display value automatically inverts when the level is used upside down.
  • एकाधिक मापन एकके: Switch between degrees (°), percentage (%), and inches per foot (in/ft).
  • Relative Measurement (REF): Allows setting a new zero reference point for comparative measurements.
  • Absolute Angle (HOLD): डिस्प्लेवरील वर्तमान मापन गोठवते.
  • श्रवणीय सूचक: Provides an audible signal at 0° and 90° for convenience when the display is not visible.
Prexiso 11.5-inch Digital Level and WORKPRO 10-inch Torpedo Level side by side

Figure 1: Prexiso 11.5-inch Digital Level (top) and WORKPRO 10-inch Torpedo Level (bottom).

Close-up of the digital level's bright LCD display showing 0.51 degrees

Figure 2: Bright LCD display of the digital level, showing measurement units.

Digital level showing REF and HOLD buttons with explanations

Figure 3: Digital level with 'REF' for relative measurement and 'HOLD' for absolute angle function.

Digital level with audible indicator icon

Figure 4: The digital level features an audible indicator for 0° and 90° angles.

2. WORKPRO 10-inch Torpedo Level

This compact torpedo level is designed for quick and accurate leveling tasks.

  • Three Vials: Equipped with horizontal, vertical, and 45-degree vials for versatile leveling.
  • वर View Vial Window: Allows observation of the horizontal vial in confined spaces.
  • Lightweight Aluminum Body: Durable and easy to handle.
  • Overmolded Rubber End Caps: Provide protection against impacts.
  • Hanger Holes: सोयीस्कर स्टोरेजसाठी.
  • Magnified Center Block Vial: Designed for maximum accuracy (0.5mm) with a convex design for clearer viewing
  • Verti-Site (Plumb View/Double View): Patent-pending design with mirrors for reading the vertical bubble from the front or side.
  • Top V-Groove: Fits the contour of curved workpieces for stable placement.
Diagram of WORKPRO 10-inch Torpedo Level highlighting features like 45 degree bubble, lightweight aluminum body, overmolded rubber end caps, magnified center block vial, and hanger holes.

Figure 5: Key features of the WORKPRO 10-inch Torpedo Level.

WORKPRO Torpedo Level showing Plumb View and Double View features with a person using it to check vertical alignment.

Figure 6: The Verti-Site feature allows for plumb view आणि दुप्पट view वाचन

Close-up of the magnified center block vial on the WORKPRO Torpedo Level, showing convex design for clarity.

Figure 7: Magnified center block vial with convex design for enhanced accuracy and clarity.

WORKPRO Torpedo Level showing hanging hole and top V-groove features.

Figure 8: The torpedo level includes a hanging hole for storage and a V-groove for curved surfaces.

सेटअप

1. Digital Level Battery Installation

  1. Locate the battery compartment cover on the digital level.
  2. Open the cover and insert the required batteries. Ensure correct polarity (+/-).
  3. बॅटरी कंपार्टमेंट कव्हर सुरक्षितपणे बंद करा.

टीप: Batteries are usually not included and must be purchased separately. Refer to the battery compartment for specific battery type requirements.

2. Initial Check (Both Levels)

Before first use, place each level on a known flat, level surface to verify basic functionality. The bubbles in the vials should center, and the digital display should read close to 0.0°.

ऑपरेटिंग सूचना

1. Using the Prexiso 11.5-inch Digital Level

  1. पॉवर चालू/बंद: दाबा चालू/बंद button to turn the level on or off.
  2. युनिट्स बदलणे: दाबा युनिट button to cycle through measurement units: degrees (°), percentage (%), and inches per foot (in/ft).
  3. Absolute vs. Relative Measurement:
    • परिपूर्ण मापन: This is the default mode, measuring the angle relative to true horizontal.
    • Relative Measurement (REF): दाबा संदर्भ button to set the current position as a new 0° reference. This is useful for measuring the difference in angle between two surfaces. Press संदर्भ again to return to absolute measurement.
  4. कार्य धरा: दाबा धरा डिस्प्लेवरील वर्तमान वाचन गोठवण्यासाठी बटण. दाबा धरा पुन्हा रिलीज करण्यासाठी.
  5. श्रवणीय सूचक: The level will emit an audible tone when it is close to 0° or 90°, helping you achieve level or plumb without constantly viewप्रदर्शन मध्ये.
Two men using the digital level to hang a picture frame, demonstrating the audible indicator feature.

Figure 9: Using the digital level with its audible indicator for precise alignment.

2. Using the WORKPRO 10-inch Torpedo Level

  1. क्षैतिज समतलीकरण: Place the level on the surface to be checked. The bubble in the horizontal vial should be centered between the two lines for a level surface.
  2. Vertical Leveling (Plumb): Hold the level vertically against the surface. The bubble in the vertical vial should be centered for a plumb surface. Utilize the Verti-Site feature for easier viewing from the front or side.
  3. 45-Degree Angle: Position the level to align with a 45-degree angle. The bubble in the 45-degree vial should be centered.
  4. वक्र पृष्ठभाग: The integrated V-groove on the top edge allows the level to sit securely on pipes or other rounded objects for accurate measurements.
Man using the WORKPRO Torpedo Level to check vertical alignment on a wall, demonstrating the Verti-Site feature.

Figure 10: Checking vertical alignment using the torpedo level's Verti-Site feature.

देखभाल

  • स्वच्छता: Wipe the levels with a soft, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or the display.
  • स्टोरेज: Store the levels in a dry place, away from direct sunlight and extreme temperatures. Remove batteries from the digital level if it will not be used for an extended period to prevent leakage.
  • तपासणी: Periodically check the levels for any signs of damage or wear. Ensure the vials are clear and the digital display functions correctly.

समस्यानिवारण

समस्यासंभाव्य कारणउपाय
Digital level does not power on.मृत किंवा चुकीच्या पद्धतीने स्थापित केलेल्या बॅटरी.योग्य ध्रुवता सुनिश्चित करून नवीन बॅटरी बदला.
Inaccurate readings on digital level.Level not calibrated or placed on an unstable surface.Ensure the level is on a stable surface. If issues persist, consult manufacturer for calibration instructions (if applicable).
Bubble in vial is difficult to read.Dirt or debris on the vial, or poor lighting.Clean the vial surface. Ensure adequate lighting.

तपशील

वैशिष्ट्यतपशील
ब्रँडPrexiso / WORKPRO
Digital Level Length11.5 इंच
टॉरपीडो पातळीची लांबी10 इंच
साहित्यAcrylic, Plastic (Vials), Aluminum (Torpedo Level Body)
ऑपरेशन मोडAutomatic (Digital Level)
डिजिटल डिस्प्लेBright Green LCD
Torpedo Level VialsHorizontal, Vertical, 45-degree
Torpedo Level Accuracy0.5mm (Magnified Center Block Vial)

हमी आणि समर्थन

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official Prexiso webसाइट. कोणत्याही वॉरंटी दाव्यांसाठी तुमचा खरेदीचा पुरावा ठेवा.

Prexiso Store: https://www.amazon.com/stores/PREXISO

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.