परिचय
This manual provides detailed instructions for the installation, operation, and maintenance of your ECOELER 6-Inch LED Motion Sensor Ceiling Light, Model CDR615C. This fixture features 16W power, 1000 lumens brightness, 3CCT selectable color temperature, and an adjustable motion sensor with timer countdown. Please read this manual thoroughly before installation and use to ensure proper function and safety.
सुरक्षितता माहिती
दुखापत किंवा नुकसान टाळण्यासाठी कृपया खालील सुरक्षा खबरदारी पाळा:
- चेतावणी: इलेक्ट्रिक शॉकचा धोका. फ्यूज किंवा सर्किट ब्रेकर स्थापित करण्यापूर्वी किंवा सर्व्हिसिंग करण्यापूर्वी वीज खंडित करा.
- हे उत्पादन उत्पादनाचे बांधकाम आणि ऑपरेशन आणि त्यात समाविष्ट असलेल्या धोक्यांशी परिचित असलेल्या व्यक्तीने लागू असलेल्या इंस्टॉलेशन कोडनुसार स्थापित केले पाहिजे.
- सर्व विद्युत कनेक्शन सुरक्षित आहेत आणि स्थानिक कोड आणि अध्यादेशांचे पालन करतात याची खात्री करा.
- फिक्स्चरमध्ये बदल करण्याचा प्रयत्न करू नका. कोणतेही बदल वॉरंटी रद्द करू शकतात आणि सुरक्षिततेचे धोके निर्माण करू शकतात.
- Do not install near heat sources or in areas with excessive moisture. This fixture is rated for indoor use.
- स्थापनेदरम्यान सुरक्षा चष्मा आणि हातमोजे घाला.
बॉक्समध्ये काय आहे
स्थापना सुरू करण्यापूर्वी सर्व घटक उपस्थित आहेत याची खात्री करा:
- Motion sensor ceiling light fixture
- E26 Adapter (for recessed can installation)
- माउंटिंग हार्डवेअर (स्क्रू, वायर नट)
- सूचना पुस्तिका (हा दस्तऐवज)
Image: Included components and dimensions of the light fixture (7.48 inches diameter, 1.45 inches height).
उत्पादन वैशिष्ट्ये
The ECOELER LED Motion Sensor Ceiling Light is designed with advanced features for convenience and energy efficiency.
प्रतिमा: ओव्हरview of product features including PIR Motion Sensor, 3 Color Temperatures, and Time Delay adjustment.
3CCT Selectable Color Temperature
This fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). You can easily select your preferred lighting ambiance by adjusting a switch located inside the lampसावली Note: This light is non-dimmable.
Image: Visual representation of 3000K, 4000K, and 5000K color temperatures.
मोशन सेन्सर कार्यक्षमता
The integrated Passive Infrared (PIR) motion sensor automatically detects movement within its range. The light will turn on when motion is sensed and ambient light conditions are dark enough. It will remain off in bright environments to save energy.
समायोज्य वेळ विलंब
The light features an adjustable time delay, allowing you to set how long the light remains on after motion stops. Options include 30 seconds, 1 minute, and 5 minutes.
Image: A person walking under the light, illustrating the countdown timer for 30 seconds, 1 minute, and 5 minutes.
स्थापना सूचना
Before installation, ensure the power supply is turned off at the circuit breaker. This fixture can be installed in a junction box or a recessed can.
Image: Installation diagrams for Junction Box and Recessed Can.
Junction Box Installation (3.5 or 4-inch J-Box)
- सर्किट ब्रेकरवर वीज बंद करा.
- Remove the existing fixture from the junction box.
- Connect the fixture's wires to the junction box wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground).
- Secure the fixture to the junction box using the provided screws.
- फिक्स्चर छताशी समतल असल्याची खात्री करा.
- शक्ती पुनर्संचयित करा आणि प्रकाशाची चाचणी घ्या.
Recessed Can Installation (5 or 6-inch Can)
- सर्किट ब्रेकरवर वीज बंद करा.
- If applicable, remove the existing bulb and trim from the recessed can.
- Screw the E26 adapter into the recessed can's socket.
- Connect the fixture's wires to the E26 adapter's wires using the provided wire nuts.
- Attach the spring tabs (if not pre-attached) to the fixture.
- Gently push the fixture into the recessed can until the spring tabs secure it in place.
- शक्ती पुनर्संचयित करा आणि प्रकाशाची चाचणी घ्या.
ऑपरेटिंग सूचना
Adjusting Color Temperature (CCT)
रंग तापमान बदलण्यासाठी:
- वीज बंद असल्याची खात्री करा.
- Carefully open or remove the lampसावली
- Locate the CCT selection switch on the fixture's circuit board.
- Slide the switch to your desired setting: 3000K, 4000K, or 5000K.
- एल पुन्हा जोडाampसुरक्षितपणे सावली.
- शक्ती पुनर्संचयित करा.
वेळ विलंब सेट करणे
To adjust the time the light stays on after motion ceases:
- वीज बंद असल्याची खात्री करा.
- Carefully open or remove the lampसावली
- Locate the time delay switch on the fixture's circuit board.
- Slide the switch to your desired setting: 30 seconds, 1 minute, or 5 minutes.
- एल पुन्हा जोडाampसुरक्षितपणे सावली.
- शक्ती पुनर्संचयित करा.
मोशन सेन्सर ऑपरेशन
The motion sensor operates based on ambient light levels and detected movement:
- दिवसाची वेळ: The light will remain OFF even if motion is detected, conserving energy.
- Nighttime/Dark Environments: The light will automatically turn ON when motion is sensed within its detection range (9-16 feet).
- स्वयंचलित शट-ऑफ: After motion stops, the light will turn OFF after the pre-set time delay (30s, 1min, or 5min).
Image: Visual guide to motion sensor behavior during day and night.
देखभाल
To ensure optimal performance and longevity of your ECOELER LED Motion Sensor Ceiling Light, follow these simple maintenance guidelines:
- स्वच्छता: साफसफाई करण्यापूर्वी वीज खंडित करा. मऊ, कोरडा किंवा किंचित डी वापराamp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or electronic components.
- तपासणी: Periodically check for any loose connections or signs of damage. If any issues are found, consult a qualified electrician.
- बल्ब बदलणे: This LED fixture does not have user-replaceable bulbs. The LED components are designed for long-term use.
समस्यानिवारण
If you encounter issues with your light, refer to the table below for common problems and solutions:
| समस्या | संभाव्य कारण | उपाय |
|---|---|---|
| प्रकाश चालू होत नाही. | No power; Sensor not detecting motion; Ambient light too bright; Incorrect wiring. | Check circuit breaker; Ensure motion is within range; Verify ambient light is dark enough; Check wiring connections. |
| प्रकाश सतत चालू राहतो. | Constant motion detected; Time delay set too long; Sensor malfunction. | Ensure no continuous motion; Adjust time delay setting; Contact support if issue persists. |
| हलके फ्लिकर्स किंवा मंद. | Loose wiring; Voltage fluctuations; Fixture damage. | Check all wiring connections; Consult an electrician for voltage issues; Contact support if damaged. |
| मोशन सेन्सर प्रतिसाद देत नाही. | Sensor obstructed; Incorrect sensitivity; Ambient light too bright. | Clear any obstructions; Ensure ambient light is low; Sensor sensitivity is fixed for this model. |
तपशील
| ब्रँड | ECOELER |
| मॉडेल क्रमांक | CDR615C |
| वाटtage | 16 वॅट्स |
| चमक | 1000 लुमेन |
| रंग तापमान | 3000K Warm White, 4000K Cool White, 5000K Daylight (Selectable) |
| खंडtage | 120 व्होल्ट |
| नियंत्रण पद्धत | मोशन सेन्सर |
| मोशन सेन्सर श्रेणी | 9-16 फूट |
| वेळ विलंब सेटिंग्ज | 30 seconds, 1 minute, 5 minutes (Adjustable) |
| साहित्य | अॅक्रेलिक, अॅल्युमिनियम |
| परिमाण (L x W x H) | ८५.४" x ६२.२" x ३९" |
| स्थापना प्रकार | Flush Mount (Junction Box or Recessed Can) |
| प्रमाणपत्रे | ETL, FCC Listed |
| इनडोअर/आउटडोअर वापर | इनडोअर |
हमी आणि समर्थन
हमी माहिती: All ECOELER products come with a 1-year warranty from the date of purchase. For any non-man-made damage under normal use, please contact our support team for a replacement solution.
ग्राहक समर्थन: If you have any questions, require assistance with installation, or need to claim your warranty, please visit the official ECOELER store or contact our customer service team. You can find more information and contact details on the ECOELER Brand Store.