JVC HA-XC72T Wireless Headphones User Manual

परिचय

खरेदी केल्याबद्दल धन्यवाद.asing the JVC HA-XC72T Wireless Headphones. This manual provides essential information for the safe and effective use of your device. Please read it thoroughly before use and keep it for future reference.

सुरक्षितता माहिती

• युनिटचे पृथक्करण, दुरुस्ती किंवा सुधारणा करू नका.
• युनिटला अति तापमान, थेट सूर्यप्रकाश किंवा उच्च आर्द्रतेच्या संपर्कात आणणे टाळा.
• Keep the unit away from water and other liquids, except for its specified water resistance.
• Do not use the unit at excessively high volumes for extended periods to prevent hearing damage.
• मुलांच्या आवाक्याबाहेर ठेवा. लहान भागांमुळे गुदमरण्याचा धोका निर्माण होऊ शकतो.

पॅकेज सामग्री

पॅकेजमध्ये सर्व वस्तू आहेत का ते तपासा:

• JVC HA-XC72T Wireless Headphones (Left and Right earbuds)
• चार्जिंग केस
• यूएसबी चार्जिंग केबल
• Earpieces (S/M/L sizes)
• "XX" Logo Sticker

सेटअप

१. हेडफोन आणि केस चार्ज करणे

पहिल्या वापरण्यापूर्वी, हेडफोन आणि चार्जिंग केस पूर्णपणे चार्ज करा.

1. Place both left and right earphones into the charging case.
2. Connect the USB charging cable to the charging case and a USB power adapter (not included).
3. चार्जिंग इंडिकेटर lamps on the case will show the charging status. Once fully charged, the lamps will change or turn off.

The JVC HA-XC72T charging case with earbuds, held in a hand, highlighting the long battery life of up to 21 hours (9 hours from earbuds + 12 hours from case). Actual playback time may vary.

2. ब्लूटूथ पेअरिंग

तुमचे हेडफोन डिव्हाइसशी जोडण्यासाठी:

1. Take both earphones out of the charging case. They will automatically enter pairing mode. The indicator lamp on one earbud will flash rapidly.
2. तुमच्या डिव्हाइसवर (स्मार्टफोन, टॅबलेट, इ.), ब्लूटूथ सक्षम करा आणि उपलब्ध डिव्हाइस शोधा.
3. Select "HA-XC72T" from the list of found devices.
4. Once connected, the indicator lamp फ्लॅशिंग थांबेल

ऑपरेटिंग सूचना

पॉवर चालू/बंद

• पॉवर चालू: चार्जिंग केसमधून इयरफोन बाहेर काढा. ते आपोआप चालू होतील.
• वीज बंद: Place the earphones back into the charging case. They will power off automatically and begin charging.

संगीत प्लेबॅक आणि आवाज नियंत्रण

The HA-XC72T features touch controls on each earbud.

• प्ले/पॉज: दोन्ही इयरबडवरील टच सेन्सरवर एकदा टॅप करा.
• पुढील ट्रॅक: Tap the touch sensor on the right earbud twice.
• मागील ट्रॅक: Tap the touch sensor on the left earbud twice.
• आवाज वाढवणे: Tap the touch sensor on the right earbud three times.
• आवाज कमी: Tap the touch sensor on the left earbud three times.

Noise Cancelling / Ambient Sound Mode

The headphones offer Active Noise Cancellation and a Quick Ambient Sound function.

A person wearing the JVC HA-XC72T earbud, with visual representation of noise cancellation waves, emphasizing the ability to enjoy sound in quiet environments.

• टॉगल मोड: Press and hold the touch sensor on the left earbud for approximately 2 seconds to cycle through Noise Cancelling ON, Ambient Sound ON, and Noise Cancelling OFF.
• Quick Ambient Sound: This function allows you to hear your surroundings without removing the earphones, useful for conversations.

कमी विलंब मोड

This mode reduces audio delay, enhancing the experience for gaming and video playback.

A person enjoying video content on a smartphone while wearing the JVC HA-XC72T earbuds, illustrating the low latency mode for synchronized audio and video.

• सक्रिय/निष्क्रिय करा: Press and hold the touch sensor on the right earbud for approximately 2 seconds to toggle Low Latency Mode ON/OFF.

हँड्स-फ्री कॉलिंग

• उत्तर द्या/कॉल संपवा: दोन्ही इयरबडवरील टच सेन्सरवर एकदा टॅप करा.
• कॉल नाकारणे: Press and hold the touch sensor on either earbud for approximately 2 seconds.

एकल एरबड वापर

Either the left or right earbud can be used independently for music playback or calls.

देखभाल

To ensure the longevity and performance of your headphones:

• इअरफोन आणि चार्जिंग केस नियमितपणे मऊ, कोरड्या कापडाने स्वच्छ करा.
• अपघर्षक क्लीनर किंवा सॉल्व्हेंट्स वापरू नका.
• Ensure the earphones are dry before placing them back into the charging case.
• धूळ आणि नुकसानापासून संरक्षण करण्यासाठी वापरात नसताना हेडफोन्स त्यांच्या चार्जिंग केसमध्ये ठेवा.

The JVC HA-XC72T earbuds on a wet surface, demonstrating their IP55 water and dust resistance, suitable for outdoor use. Note: IP55 rating applies to the earbud body only.

समस्यानिवारण

If you encounter issues with your HA-XC72T headphones, refer to the following common solutions:

No Sound from One Earbud (or other pairing issues)

If only one earbud is producing sound, or if you experience other pairing difficulties, try the following steps:

1. Place both left and right earphones back into the charging case.
2. Take both left and right earphones out of the case simultaneously. Check if the issue is resolved.
3. If the issue persists, delete the "HA-XC72T" Bluetooth registration from your device's Bluetooth settings and attempt to re-pair.
4. If the above steps do not resolve the issue, perform a factory reset (initialization) as follows:

Factory Reset (Initialization) Steps:

1. Place both left and right earphones into the charging case. Ensure the charging lamps are lit, indicating they are charging.
2. While the earphones are in the case, press and hold the touch sensors on both the left and right earphones for approximately 15 seconds. The lamp will blink or its reaction will change, indicating initialization is in progress. Perform this for both earbuds.
3. Release your fingers from the touch sensors and close the charging case lid.
4. Wait for approximately 10-20 seconds.
5. Take both left and right earphones out of the case simultaneously. The earphones will begin synchronizing with each other again.
6. On your smartphone or device, open the Bluetooth settings. If "HA-XC72T" is still listed, select "Forget Device" or "Delete Device".
7. Perform the Bluetooth pairing process again from step 1 of the "Bluetooth Pairing" section.

शक्ती नाही

• चार्जिंग केस आणि इअरफोन पूर्णपणे चार्ज झाले आहेत याची खात्री करा.
• चार्जिंग केबल सुरक्षितपणे जोडलेली आहे का ते तपासा.

खराब आवाज गुणवत्ता

• Ensure the earphones are properly seated in your ears. Try different earpiece sizes for a better seal.
• व्यत्यय कमी करण्यासाठी तुमच्या कनेक्ट केलेल्या डिव्हाइसच्या जवळ जा.
• Clean any debris from the earphone nozzles.

तपशील

हमी

This product comes with a 1-year manufacturer's warranty from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

सपोर्ट

For further assistance, technical support, or warranty inquiries, please contact JVC customer service through their official webसाइट किंवा तुमच्या उत्पादन पॅकेजिंगसह प्रदान केलेली संपर्क माहिती.