SAMCON SBE-C-1 DC LED Light with Switch User Manual

परिचय

Thank you for choosing the SAMCON SBE-C-1 DC LED Light with Switch. This energy-efficient LED light is designed for various DC applications, providing bright and reliable illumination. Please read this manual carefully before installation and operation to ensure safe and optimal performance.

महत्त्वाच्या सुरक्षितता सूचना

• स्थापना किंवा सेवा करण्यापूर्वी वीज खंडित करा.
• This product is designed for DC (Direct Current) power sources only. Ensure the power supply matches the product's voltagई आवश्यकता.
• Do not expose the light to excessive moisture or extreme temperatures.
• Handle the LED board with care to avoid damage to components.
• Ensure proper polarity when connecting wires (red for positive, black for negative). Incorrect polarity can damage the device.
• जर तुम्हाला खात्री नसेल तर स्थापना एखाद्या पात्र व्यक्तीने करावी.

पॅकेज सामग्री

• 1 x SAMCON SBE-C-1 DC LED Light with Switch

उत्पादन संपलेview

The SAMCON SBE-C-1 is a compact and energy-efficient DC LED light featuring an integrated switch for convenient operation. It consists of an LED board with multiple LED chips, a control component, and pre-attached power wires.

आकृती 1: समोर view of the SAMCON SBE-C-1 DC LED Light board, displaying the array of LED chips, the SAMCON brand name, model number SBE-C-1, and the attached red (positive) and black (negative) power wires.

आकृती 2: मागे view of the SAMCON SBE-C-1 DC LED Light board, revealing a metallic heat sink plate designed for thermal management, with two visible screw holes for mounting.

स्थापना सूचना

1. माउंटिंग पृष्ठभाग तयार करा: Choose a suitable, flat surface for mounting the LED light. Ensure the surface can support the light and is free from obstructions.
2. एलईडी लाईट सुरक्षित करा: Use appropriate screws (not included) to secure the LED board to the chosen surface through the mounting holes. Refer to Figure 2 for the location of mounting holes on the back plate.
3. वीज कनेक्ट करा:
   • Identify the positive (+) and negative (-) terminals of your DC power source.
   • कनेक्ट करा लाल तार from the LED light to the धन (+) टर्मिनल of your DC power source.
   • कनेक्ट करा काळा वायर from the LED light to the नकारात्मक (-) टर्मिनल of your DC power source.
   • Warning: Ensure correct polarity to prevent damage to the LED light.
4. कनेक्शन सत्यापित करा: Double-check all connections to ensure they are secure and correctly polarized.

ऑपरेटिंग सूचना

1. पॉवर चालू: Once the LED light is securely installed and correctly wired to a compatible DC power source, apply power to the circuit.
2. Use the Switch: The SAMCON SBE-C-1 features an integrated push-button switch. Press the switch to turn the LED light ON. Press it again to turn the LED light OFF.

देखभाल

• स्वच्छता: Gently wipe the LED light with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
• तपासणी: Periodically check the wiring for any signs of wear or damage. Ensure mounting screws remain tight.
• उष्णता व्यवस्थापन: Ensure adequate airflow around the back of the LED board (heat sink) to prevent overheating, especially during prolonged use.

समस्यानिवारण

तपशील

हमी आणि समर्थन

For warranty information or technical support, please contact SAMCON customer service through your point of purchase. Keep your purchase receipt as proof of purchase.