Saooer 20A Solar Charge Controller User Manual

परिचय

This manual provides essential information for the safe and efficient operation of your Saooer 20A Solar Charge Controller. This intelligent regulator is designed to manage the working of solar panels and batteries in a solar system, featuring dual USB ports for mobile device charging. It is compatible with 12V and 24V systems and includes multiple protection functions to ensure system efficiency and prolong battery lifespan.

आकृती 1: समोर view of the Saooer 20A Solar Charge Controller.

सुरक्षितता सूचना

• Ensure all connections are correct before powering on the controller. Incorrect wiring can damage the device or connected components.
• The controller is designed for indoor use or in a protected environment. Avoid exposure to direct sunlight, high temperatures, or moisture.
• कंट्रोलर स्वतः वेगळे करण्याचा किंवा दुरुस्त करण्याचा प्रयत्न करू नका. सेवेसाठी पात्र कर्मचाऱ्यांचा संदर्भ घ्या.
• मुलांच्या आवाक्याबाहेर ठेवा.
• This controller is only suitable for lead-acid batteries: OPEN, AGM, GEL. Do not use with other battery types like Lithium-ion or LiFePO4, as this may cause damage or safety hazards.
• Always connect the battery first, then the solar panel, and finally the load. When disconnecting, reverse the order: disconnect the load, then the solar panel, and finally the battery.

उत्पादन वैशिष्ट्ये

• स्वयंचलित प्रणाली व्हॉल्यूमtagई ओळख: Automatically detects 12V/24V system voltage.
• PWM Charging: Efficient Pulse Width Modulation charging mode.
• ड्युअल यूएसबी पोर्टः Provides 5V/2A output for charging mobile devices.
• एलसीडी डिस्प्ले: Clear display of status and data, allowing for convenient mode switching and parameter configuration.
• अनेक संरक्षण कार्ये: Includes short-circuit protection, open-circuit protection, reverse protection, and over-load protection.
• समायोज्य पॅरामीटर्स: User-adjustable charge and discharge parameters.
• तापमान भरपाई: Automatic temperature compensation for optimal charging.

सेटअप आणि स्थापना

Follow these steps carefully to install your solar charge controller. Incorrect installation can lead to damage or malfunction.

1. वायरिंग तयार करा: Ensure all wires are properly stripped and have appropriate connectors if necessary. Use wires of sufficient gauge for your system's current.
2. बॅटरी कनेक्ट करा: Connect the battery to the charge regulator first. Observe correct polarity (+ to + and - to -). The controller will automatically recognize the battery voltage (12V किंवा 24V).
   

   आकृती 2: बाजू view showing the connection terminals for battery, solar panel, and load.
3. सोलर पॅनेल कनेक्ट करा: Connect the solar panel to the solar charge controller. Ensure correct polarity.
4. लोड कनेक्ट करा: Connect the consumer or load to the charge controller regulator. Ensure correct polarity.

महत्त्वाची सूचना: Always connect the battery first, then the solar panel, and finally the load. When disconnecting the controller, please remove the solar panel, then the load, and finally the battery. This sequence helps the controller recognize the battery voltage correctly and prevents damage.

ऑपरेटिंग सूचना

एलसीडी डिस्प्ले आणि बटणे

आकृती १: कोन असलेला view showing the LCD display and control buttons.

The controller features an LCD display and three buttons for operation:

• मेनू बटण: Used to cycle through display modes and enter parameter setting mode.
• अप बटण: मेनूमध्ये मूल्ये वाढवण्यासाठी किंवा वरच्या दिशेने नेव्हिगेट करण्यासाठी वापरले जाते.
• डाउन बटण: Used to decrease values or navigate downwards in menus.

प्रदर्शन मोड

Press the Menu button to cycle through the following display modes:

• बॅटरी व्हॉल्यूमtage (V)
• सोलर पॅनल व्हॉलtage (V)
• लोड करंट (A)
• Battery Temperature (°C)
• चार्ज करंट (A)
• डिस्चार्ज करंट (A)
• Load Working Mode (24H, 0-23H, 0H)

पॅरामीटर सेटिंग्ज

To enter parameter setting mode, press and hold the Menu button for 5 seconds. Use the Up and Down buttons to adjust values, and the Menu button to confirm and move to the next parameter. Press and hold Menu again to exit setting mode.

Note: For 24V systems, multiply the 12V values by two.

देखभाल

• नियमित तपासणी: सर्व वायरिंग कनेक्शन घट्टपणा आणि गंज यासाठी वेळोवेळी तपासा.
• स्वच्छता: Keep the controller clean and free from dust. Use a dry cloth for cleaning.
• वायुवीजन: जास्त गरम होण्यापासून रोखण्यासाठी कंट्रोलरभोवती पुरेसे वायुवीजन सुनिश्चित करा.
• बॅटरी आरोग्य: मॉनिटर बॅटरी व्हॉल्यूमtage and health regularly. Replace batteries as needed.

समस्यानिवारण

तपशील

Figure 4: Product dimensions of the solar charge controller.

हमी आणि समर्थन

For warranty information or technical support, please contact the manufacturer, Saooer, through their official channels. Refer to your purchase documentation for specific warranty terms and contact details.

निर्माता: Saooer

ASIN: B095764VB7

UPC: 605832982977

आपण भेट देऊ शकता Saooer Store on Amazon अधिक माहितीसाठी किंवा समर्थनाशी संपर्क साधण्यासाठी.