EverBrite EB-70LED-Dimmer-Motion Under Cabinet Lighting User Manual

1. परिचय

This manual provides detailed instructions for the installation, operation, and maintenance of your EverBrite EB-70LED-Dimmer-Motion Under Cabinet Lighting. Please read this manual thoroughly before using the product to ensure proper function and safety.

2. उत्पादनाची वैशिष्ट्ये

• हाताच्या लाटेवर नियंत्रण: Easily turn the light on or off with a simple hand wave within 4 inches of the sensor.
• Adjustable Brightness (Dimmer): Hold your hand under the sensor in 'On Mode' to adjust the light intensity. The light remembers your last brightness setting.
• Motion Sensor (Auto Mode): The light automatically turns on when motion is detected within 10 feet (3 meters) and a 130-degree angle in dark conditions. It turns off after 20 seconds of no motion.
• रिचार्ज करण्यायोग्य बॅटरी: Equipped with a premium 2400 mAh rechargeable battery for extended use. The automatic sensor helps conserve battery life.
• फ्लिकर-फ्री एलईडी लाइटिंग: Features 70 bright LEDs providing 300 lumens of 6000K light, designed to be gentle on the eyes and reduce visual fatigue.
• लवचिक स्थापना: Offers tool-free installation using either a magnetic strip for metal surfaces or double-sided adhesive tape for other surfaces like glass, wood, or stucco.

3. पॅकेज सामग्री

अनपॅक करताना सर्व वस्तू उपलब्ध आहेत आणि चांगल्या स्थितीत आहेत याची खात्री करा:

• EverBrite EB-70LED-Dimmer-Motion Under Cabinet Light Bar (2 units)
• यूएसबी चार्जिंग केबल
• Metal Plates with 3M Adhesive (for mounting on non-magnetic surfaces)
• Integrated 2400 mAh Lithium Polymer Battery

4. तपशील

5. स्थापना

The EverBrite Under Cabinet Light offers two simple, tool-free installation methods:

5.1 चुंबकीय स्थापना

If your desired mounting surface is metal, the light bar can be directly attached using its built-in magnets.

1. Ensure the metal surface is clean and dry.
2. Simply place the light bar against the metal surface. The magnets will hold it in place.

5.2 Adhesive Installation (for Non-Metal Surfaces)

For surfaces such as wood, glass, or stucco, use the provided metal plates with 3M adhesive.

1. इच्छित माउंटिंग पृष्ठभाग धूळ आणि ग्रीसपासून मुक्त आहे याची खात्री करण्यासाठी ते पूर्णपणे स्वच्छ करा.
2. Peel off the protective film from one side of the 3M adhesive on the metal plate.
3. Attach the metal plate to the back of the light bar, aligning it with the magnetic area.
4. Peel off the protective film from the other side of the 3M adhesive on the metal plate.
5. Press the light bar firmly onto the cleaned non-metal surface for at least 30 seconds to ensure strong adhesion.

Image: Demonstrates attaching the metal plate to the light bar and then mounting it with adhesive.

प्रतिमा: ओव्हरview of the light bar, highlighting the USB port, ON-OFF-AUTO switch, and dimensions (17.48" L x 2.01" W x 1.93" H).

6. ऑपरेटिंग सूचना

The light bar features a switch with three positions: ON, OFF, and AUTO. Select the desired mode for operation.

6.1 ON Mode (Manual Control & Dimming)

In this mode, the motion sensor function is disabled. You control the light manually.

• चालू/बंद करण्यासाठी: Wave your hand within 4 inches of the sensor.
• चमक समायोजित करण्यासाठी: Hold your hand under the sensor within 4 inches. The brightness will cycle from high to low and back to high. Remove your hand when the desired brightness is reached. The light will remember the last brightness setting.

Image: Close-up of the light in ON mode, illustrating the hand waving function for control.

Image: Demonstrates stepless dimming by holding a hand under the sensor, with brightness levels indicated from 100% down to 10%.

6.2 AUTO Mode (Motion Sensor)

In this mode, the light operates automatically based on motion detection and ambient light conditions. The hand wave control is disabled.

• The light will turn on when motion is detected in sufficiently dark conditions.
• The motion sensor has a detection range of up to 10 feet (3 meters) with a 130-degree angle.
• The light will automatically turn off after 20 seconds of no motion being detected.

Image: Explains the two lighting modes, highlighting the motion and light sensor functionality in AUTO mode.

टीप: The functions in ON mode and AUTO mode do not overlap. Ensure the switch is in the correct position for your desired operation.

7. चार्जिंग

The EverBrite light bar is equipped with a rechargeable battery. When the light dims or stops working, it's time to recharge.

1. Locate the USB charging port on the side of the light bar.
2. Connect the provided USB charging cable to the light bar's port and to a standard USB power source (e.g., computer, USB wall adapter).
3. A charging indicator light will typically illuminate during charging and change color or turn off when fully charged.
4. A full charge usually takes 4-5 hours and provides approximately 5.5 hours of continuous use. The battery can be recharged over 300 times.

Image: Shows the light bar connected to a USB charger, indicating its 2400 mAh rechargeable battery and charging times.

8. देखभाल

• स्वच्छता: लाईट बार मऊ, कोरड्या कापडाने पुसून टाका. अपघर्षक क्लीनर किंवा सॉल्व्हेंट्स वापरू नका.
• बॅटरी काळजी: To prolong battery life, avoid fully discharging the battery frequently. Recharge the light when it starts to dim. If storing for a long period, charge the battery every 3-6 months.
• स्टोरेज: थेट सूर्यप्रकाश आणि अति तापमानापासून दूर थंड, कोरड्या जागी प्रकाश साठवा.

9. समस्या निवारण

10. सुरक्षितता माहिती

• Do not disassemble, repair, or modify the product. This may cause electric shock, fire, or damage.
• उत्पादनास पाणी आणि उच्च आर्द्रतेपासून दूर ठेवा.
• उत्पादनास थेट सूर्यप्रकाश किंवा वाढीव काळासाठी उच्च तापमानात उघड करू नका.
• मुलांच्या आवाक्याबाहेर ठेवा.
• चार्जिंगसाठी फक्त प्रदान केलेली USB केबल वापरा.
• Avoid looking directly into the LED light for prolonged periods, as it may cause eye strain.

१०. अधिकृत उत्पादन व्हिडिओ

Watch these official videos for visual guidance on installation and features.

12. हमी आणि समर्थन

For warranty information or technical support, please refer to the product packaging or contact EverBrite customer service. Keep your purchase receipt for any warranty claims.