Lepro 40ft RGB LED Strip Lights User Manual

1. परिचय

Thank you for choosing Lepro RGB LED Strip Lights. This manual provides detailed instructions for the safe and efficient use of your new LED strip lights. These versatile lights offer a wide range of colors and modes, perfect for enhancing various indoor environments.

Figure 1: Lepro 40ft RGB LED Strip Lights in a living room setting.

२. बॉक्समध्ये काय आहे?

सर्व वस्तू उपलब्ध आहेत याची खात्री करण्यासाठी कृपया पॅकेजमधील सामग्री तपासा:

• 1 x 39.4ft (12m) Non-Waterproof RGB LED Strip
• १ x ४०-की आयआर रिमोट कंट्रोल
• 1 x 24V Power Adapter (US Plug)

3. सुरक्षितता माहिती

Read all safety instructions before installation and use. Keep this manual for future reference.

• फक्त अंतर्गत वापर: This product is designed for indoor use and is not waterproof.
• वीज पुरवठा: Use only the provided 24V power adapter. Using an incorrect power supply may damage the product and void the warranty.
• स्थापना पृष्ठभाग: चांगल्या चिकटपणाच्या कामगिरीसाठी स्थापनेची पृष्ठभाग स्वच्छ, कोरडी आणि गुळगुळीत असल्याची खात्री करा.
• पट्टी कापणे: Only cut the LED strip at designated cut marks (every 3 LEDs). Cutting elsewhere will damage the strip.
• जास्त गरम होणे टाळा: Do not coil the LED strip tightly when powered on, as this can cause overheating.
• मुले आणि पाळीव प्राणी: Keep the product and its components out of reach of children and pets.

३. सेटअप आणि इन्स्टॉलेशन

योग्य स्थापनेसाठी या चरणांचे अनुसरण करा:

1. पृष्ठभाग तयार करा: Clean the desired installation surface thoroughly to remove dust, oil, or moisture. A clean, dry surface ensures strong adhesion.
2. मोजमाप करा आणि कट करा (आवश्यक असल्यास): Unroll the LED strip and measure the required length. If shortening is needed, cut the strip only at the designated cut marks, typically indicated by a copper line and a scissor icon, every 3 LEDs.
3. Attach the Strip: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
4. Secure with Fixing Clips (Optional): For added security, especially on textured surfaces or corners, use the provided fixing clips. Secure them at regular intervals or critical points along the strip.
5. वीज कनेक्ट करा: Connect the LED strip to the IR receiver, and then connect the IR receiver to the 24V power adapter. Plug the power adapter into a standard electrical outlet.
6. रिमोट सक्रिय करा: Before first use, remove the plastic insulation tab from the battery compartment of the 44-key IR remote control.

Figure 2: Visual guide for LED strip installation steps.

Figure 3: Connection diagram and remote activation.

Figure 4: 3M Adhesive and Fixing Clips.

5. ऑपरेटिंग सूचना

Control your LED strip lights using the included 44-key IR remote control. Ensure the remote is pointed directly at the IR receiver for optimal response.

Figure 5: 44-Key IR Remote Control Layout.

रिमोट कंट्रोल फंक्शन्स:

• चालू/बंद: Power button to turn the lights on or off.
• ब्राइटनेस ऍडजस्टमेंट: वापरा ↑ आणि ↓ buttons to increase or decrease brightness.
• रंग निवड: Choose from 16 preset static colors, including Red, Green, Blue (RGB), and White.
• DIY रंग: 6 programmable DIY buttons allow you to save your favorite custom color mixes.
  • ए दाबा DIY बटण
  • वापरा ↑ आणि ↓ arrows next to R, G, B to adjust the intensity of each primary color.
  • तेच दाबा DIY button again to save your custom color.
• मोड निवड: Select from 8 dynamic modes (e.g., Flash, Fade, Jump) to create different lighting effects.
  • फ्लॅश: Jumps between colors.
  • FADE3/FADE7: Fades between 3 or 7 colors.
  • JUMP3/JUMP7: Jumps between 3 or 7 colors.
  • ऑटो: Cycles through all modes.
  • जलद/मंद: डायनॅमिक मोड्सचा वेग समायोजित करते.

Figure 6: Remote control in use for ambient lighting.

6. देखभाल

Proper maintenance ensures the longevity of your LED strip lights.

• स्वच्छता: Gently wipe the LED strip with a soft, dry cloth to remove dust. Do not use liquid cleaners or immerse the strip in water.
• स्टोरेज: If storing the lights for an extended period, ensure they are clean, dry, and coiled loosely to prevent damage.
• वाकणे टाळा: Do not bend the LED strip sharply, especially at the connection points, as this can damage the internal circuitry.

7. समस्या निवारण

जर तुम्हाला समस्या येत असतील, तर खालील सामान्य समस्या आणि उपाय पहा:

8. तपशील

Figure 7: ETL Listed 24V Power Adapter.

9. हमी आणि समर्थन

Lepro products are designed for reliability and performance. For specific warranty details and customer support, please refer to the warranty card included with your product or visit the official Lepro webसाइट

संपर्क माहिती:

• Webसाइट: www.lepro.com (कृपया अधिकृत तपासा webसर्वात अद्ययावत संपर्क माहितीसाठी साइट.)
• ईमेल: Refer to product packaging or webसाइट