femometer DMT-2032
Femometer Digital Thermometer DMT-2032 User Manual
मॉडेल: DMT-2032
1. परिचय
This manual provides detailed instructions for the safe and effective use of your Femometer Digital Thermometer, model DMT-2032. This device is designed for accurate temperature measurement for adults and children via oral, rectal, or underarm methods. Please read this manual thoroughly before first use and keep it for future reference.

Image 1: Femometer Digital Thermometer DMT-2032 with its retail packaging.
2. उत्पादनाची वैशिष्ट्ये
- अचूक मापन: Utilizes an advanced sensory probe for precise temperature detection.
- बहुमुखी वापर: Suitable for oral, rectal, and underarm temperature measurement for all ages.
- एलसीडी स्क्रीन प्रदर्शन: Clear digital display for easy reading.
- मेमरी रिकॉल: Stores the last measured temperature reading.
- Fever Alert: Provides an audible beep when measurement is complete, and may indicate fever.
- C/F Switchable: Easily switch between Celsius (°C) and Fahrenheit (°F) units.
- कमी बॅटरी अलर्ट: Indicates when the battery needs replacement.
- ऑटो पॉवर बंद: Automatically shuts down to conserve battery life.
- Waterproof Tip: Allows for simple and hygienic cleaning.
- Protective Storage Case: Included for convenient storage and portability.

प्रतिमा 2: ओव्हरview of the thermometer's key features.
3. सेटअप
3.1. बॅटरी इन्स्टॉलेशन
The Femometer Digital Thermometer comes with one LR41 battery pre-installed. If the battery needs replacement, follow these steps:
- Gently slide off the battery cover located at the end of the thermometer.
- Remove the old LR41 battery.
- Insert a new LR41 battery with the positive (+) side facing up.
- बॅटरी कव्हर सुरक्षितपणे बदला.
४.३. सुरुवातीचा पॉवर ऑन
Press the power button to turn on the thermometer. A short beep will sound, and the display will show all segments briefly, followed by the last measured temperature. Then, 'Lo' with a flashing '°C' or '°F' will appear, indicating the thermometer is ready for measurement.
4. ऑपरेटिंग सूचना
4.1. मोजमाप घेणे
- Ensure the thermometer is clean and disinfected.
- डिव्हाइस चालू करण्यासाठी पॉवर बटण दाबा.
- Position the thermometer according to the desired measurement method (oral, rectal, or underarm).
- Hold the thermometer in place until a series of beeps indicates the measurement is complete. For accurate readings, continue holding for approximately 60 seconds after the initial beep.
- एलसीडी स्क्रीनवर प्रदर्शित होणारे तापमान वाचा.
- Press the power button to turn off the thermometer, or it will automatically shut off after approximately 10 minutes of inactivity.

Image 3: The thermometer can be used for oral, rectal, and underarm temperature measurement.
4.2. Measurement Methods
- तोंडी वापर: Place the tip of the thermometer under the tongue. Close your mouth and hold the thermometer in place.
- गुदाशय वापरा: Lubricate the tip with a water-soluble jelly. Gently insert the tip into the rectum (approximately 0.5 inches for infants). This method is generally recommended for infants and young children.
- अंडरआर्म (एक्सिलरी) वापरा: Place the tip of the thermometer in the armpit, ensuring good skin contact. Hold the arm firmly against the body. This method may provide less accurate readings than oral or rectal methods.

Image 4: Oral temperature measurement.

Image 5: Rectal temperature measurement.

Image 6: Underarm temperature measurement.
२. तापमान युनिट्स बदलणे (°C/°F)
To switch between Celsius and Fahrenheit, ensure the thermometer is off. Press and hold the power button for approximately 3-5 seconds until the unit changes on the display.

Image 7: Switching between Celsius and Fahrenheit.
5. देखभाल
5.1. स्वच्छता आणि निर्जंतुकीकरण
The thermometer tip is waterproof and can be cleaned easily. After each use, wipe the tip with a soft cloth moistened with rubbing alcohol (70% isopropyl alcohol) or an antiseptic solution. Do not immerse the entire thermometer in water or any cleaning solution.

Image 8: The waterproof tip allows for easy cleaning.
5.2. बॅटरी बदलणे
When the low battery indicator (a flashing battery icon) appears on the display, it is time to replace the LR41 battery. Refer to section 3.1 for battery installation instructions.

Image 9: Low battery alarm indication.
5.3. स्टोरेज
Store the thermometer in its protective case in a cool, dry place, away from direct sunlight and extreme temperatures.
6. समस्या निवारण
If you encounter any issues with your thermometer, please refer to the table below for common problems and their solutions.
| त्रुटी संदेश | समस्या | उपाय |
|---|---|---|
| Lo | घेतलेले तापमान 90.0°F (32.0°C) पेक्षा कमी आहे. | Turn off, wait one minute, and take a new temperature via close contact and sufficient rest. |
| Hi | Temperature taken is higher than 109.9°F (42.9°C). | Turn off, wait one minute, and take a new temperature via close contact and sufficient rest. |
| त्रुटी | यंत्रणा व्यवस्थित काम करत नाही. | Unload the battery, wait for 1 minute, and repower it. If the message reappears, contact the retailer for service. |
| Battery Icon Flashing | Dead battery; battery icon is flashing, cannot be measured. | बॅटरी बदला. |

Image 10: Troubleshooting guide for common display messages.
7. तपशील
| मॉडेल क्रमांक | डीएमटी -2032 |
| उत्पादन परिमाणे | 5.9 x 2.1 x 0.8 इंच |
| वजन | 1.13 औंस |
| उर्जा स्त्रोत | १ x LR41 बॅटरी (समाविष्ट) |
| डिस्प्ले प्रकार | डिजिटल एलसीडी |
| मापन अचूकता | ±0.1°C / 0.2°F |
| विशेष वैशिष्ट्ये | High Accuracy, Fever Alert, Memory Recall, C/F Switchable, Waterproof Tip, Auto Off |
| बाह्य साहित्य | प्लास्टिक |
| उत्पादन काळजी | पुसून टाका |
| उत्पादक | जॉयटेक हेल्थकेअर कं, लि. |
8. हमी आणि समर्थन
Femometer is committed to providing reliable products and customer satisfaction.
- Lifetime Unlimited Warranty: Your Femometer Digital Thermometer is backed by a lifetime warranty.
- ग्राहक समर्थन: Dedicated 24/7 customer support is available to assist you with any questions or concerns.
- प्रमाणपत्रे: This product is FDA/MDL/CE certified, ensuring quality and safety standards.

Image 11: Reliable brand information including certifications and support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.