ARMOR LINE UPS 600VA / 360W User Manual

1. परिचय

This manual provides essential information for the safe and efficient operation of your ARMOR LINE UPS 600VA / 360W Battery Backup & Surge Protector with Automatic Voltage Regulation (AVR). Please read this manual thoroughly before installation and use, and retain it for future reference.

2. सुरक्षितता सूचना

• यूपीएस सी उघडू नका.asing. आत वापरकर्ता-सेवायोग्य भाग नाहीत.
• Do not expose the UPS to direct sunlight, excessive heat, or humidity.
• युनिटभोवती योग्य वायुवीजन सुनिश्चित करा. वायुवीजन उघडण्यांना अडथळा आणू नका.
• UPS ला फक्त ग्राउंड केलेल्या पॉवर आउटलेटशी कनेक्ट करा.
• Do not connect appliances with high power consumption (e.g., laser printers, heaters) to the UPS battery backup outlets.
• In case of emergency, press the power button to turn off the UPS and disconnect it from the power source.

3. उत्पादन संपलेview

The ARMOR LINE UPS provides reliable battery backup and surge protection for your electronic devices. It features Automatic Voltage Regulation (AVR) to stabilize incoming power without draining the battery, extending battery life and ensuring consistent power delivery.

समोर view of the ARMOR LINE UPS, showing the power button and the LCD display. The display indicates Input Voltage (180 VAC), AC Mode, Output Voltage (212 VAC), Battery Level, and Load Level.

प्रमुख वैशिष्ट्ये:

• AVR Boost and Buck: Automatically corrects under-voltage किंवा over-voltage conditions without using battery power.
• कोल्ड स्टार्ट फंक्शन: Allows the UPS to power on using battery power without utility connection.
• Smart USB Interface: For real-time power monitoring and automatic shutdown capabilities.
• Built-in Self-Diagnostic Function: Executes automatically upon power-on or via software control.
• Modem/LAN Internet Generator Set: Protects network connections from spikes or surges.
• Faster Charging Capacity: Recharges to 90% in 6-8 hours.
• Auto Charging at Off Mode: Battery charges continuously even when the UPS is off.
• ऑटो-रीस्टार्ट फंक्शन: UPS automatically restarts when utility power recovers.

4. सेटअप

4.1 अनपॅक करणे

Carefully unpack the UPS and inspect it for any shipping damage. If any damage is found, do not operate the unit and contact your dealer.

4.2 प्लेसमेंट

• यूपीएस स्वच्छ, कोरड्या आणि हवेशीर जागेत ठेवा.
• उष्णतेच्या स्रोतांजवळ किंवा थेट सूर्यप्रकाशात UPS ठेवणे टाळा.
• Ensure there is adequate space (at least 2 inches) around all sides of the UPS for proper airflow.

4.3 प्रारंभिक चार्जिंग

Before initial use, connect the UPS to a standard wall outlet and allow it to charge for at least 8 hours. This ensures the battery is fully charged and ready to provide optimal backup power.

4.4 कनेक्टिंग डिव्हाइसेस

1. UPS पॉवर कॉर्ड ग्राउंड केलेल्या वॉल आउटलेटमध्ये प्लग करा.
2. Connect your computer, monitor, and other critical electronic devices to the battery backup outlets on the rear of the UPS. These outlets provide both surge protection and battery backup.
3. For devices that only require surge protection (e.g., printers, scanners), use the surge-only outlets if available.
4. Connect the USB cable from the UPS to your computer for power management software functionality (if applicable).
5. For network protection, connect your modem/router to the UPS using the provided Modem/LAN protection ports.

5. ऑपरेटिंग सूचना

5.1 पॉवरिंग चालू/बंद

• चालू करण्यासाठी: समोरील पॅनलवरील पॉवर बटण सुमारे २ सेकंद दाबा आणि धरून ठेवा जोपर्यंत तुम्हाला बीप ऐकू येत नाही आणि LCD डिस्प्ले उजळत नाही.
• पॉवर ऑफ करण्यासाठी: Press and hold the power button for approximately 3 seconds until you hear a beep and the LCD display turns off.

२.३ एलसीडी डिस्प्ले इंडिकेटर

The LCD display provides real-time status information about the UPS. Refer to the image in Section 3 for a visual guide.

• INPUT VAC: Displays the incoming utility voltage.
• एसी मोड: Indicates that the UPS is operating on utility power.
• OUTPUT VAC: व्हॉल्यूम दाखवतोtage being supplied by the UPS to connected devices.
• BATT. LEVEL: Shows the current charge level of the internal battery.
• लोड पातळी: टक्केवारी दर्शवतेtagकनेक्टेड उपकरणांद्वारे वापरल्या जाणाऱ्या UPS च्या क्षमतेचा e.

५.६ कोल्ड स्टार्ट फंक्शन

The Cold Start function allows you to power on the UPS and connected devices using only battery power, even when there is no utility power available. To activate, ensure the UPS is off and not connected to utility power, then press and hold the power button for approximately 5 seconds. The UPS will power on and supply battery power to the outlets.

5.4 Smart USB Interface

Connect the UPS to your computer via the USB port to enable power management features. This allows for real-time monitoring of UPS status, automatic shutdown of your computer during extended power outages, and configuration of various settings. Refer to the software documentation for detailed instructions.

6. देखभाल

6.1 बॅटरी काळजी

• To maximize battery life, keep the UPS connected to a wall outlet at all times to ensure the battery remains fully charged.
• The UPS features Auto Charging at Off Mode, meaning the battery will continue to charge even when the unit is powered off, as long as it is connected to utility power.
• If the UPS is stored for an extended period, recharge the battery every three months to prevent permanent damage.

6.2 Self-Diagnostic Function

The UPS performs a self-diagnostic test automatically upon power-on. This test checks the internal components and battery status. If an issue is detected, an alarm may sound, and an error code might be displayed on the LCD. Refer to the Troubleshooting section for common error codes.

6.3 स्वच्छता

To clean the exterior of the UPS, use a soft, dry cloth. Do not use liquid or aerosol cleaners, as they may damage the unit or create a shock hazard.

6.4 बॅटरी बदलणे

The battery in your UPS is designed for a specific lifespan. When the battery reaches the end of its life, it should be replaced by qualified service personnel. Contact Armor support or a certified technician for battery replacement services. Do not attempt to replace the battery yourself.

7. समस्या निवारण

This section addresses common issues you might encounter with your ARMOR LINE UPS. If the problem persists after following these steps, contact customer support.

8. तपशील

9. हमी आणि समर्थन

For warranty information and technical support, please refer to the documentation included with your product packaging or visit the official Armor webसाइट. वॉरंटी दाव्यांसाठी खरेदीचा पुरावा म्हणून तुमची खरेदी पावती ठेवा.