1. परिचय
This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.
2. सुरक्षितता माहिती
- स्थापना आणि ऑपरेशन करण्यापूर्वी सर्व सूचना काळजीपूर्वक वाचा.
- Do not expose the sensor to direct sunlight, extreme temperatures, or high humidity.
- Ensure the device is installed in a stable location to prevent accidental falls.
- Only use the specified battery type. Incorrect battery usage may cause damage or malfunction.
- डिव्हाइस मुलांच्या आवाक्याबाहेर ठेवा.
3. पॅकेज सामग्री
पॅकेजमध्ये सर्व वस्तू आहेत का ते तपासा:
- 1x Intelbras IVP 2000 SF Wireless Passive Infrared Sensor
- 1x माउंटिंग ब्रॅकेट
- 1x Set of Screws and Wall Plugs
- 1x Battery (Alkaline)
- 1x Quick Start Guide (this manual)
4. उत्पादन संपलेview
The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.
आकृती 1: समोर view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.
मुख्य घटक:
- पीआयआर लेन्स: Detects infrared radiation from moving bodies.
- एलईडी निर्देशक: Provides status feedback (e.g., detection, low battery).
- बॅटरी कंपार्टमेंट: वीज स्रोत ठेवतो.
- माउंटिंग पॉइंट्स: For secure installation on a wall.
- Tampएर स्विच: Triggers an alarm if the sensor cover is opened.
5. सेटअप
5.1. बॅटरी इन्स्टॉलेशन
- Open the sensor's front cover by gently prying it open from the bottom notch.
- Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
- Close the front cover, ensuring it clicks securely into place.
१. सेन्सर बसवणे
The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.
- Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
- भिंतीवरील स्क्रू पोझिशन्स चिन्हांकित करण्यासाठी टेम्पलेट म्हणून माउंटिंग ब्रॅकेट वापरा.
- चिन्हांकित ठिकाणी छिद्रे पाडा आणि भिंतीवरील प्लग घाला.
- दिलेल्या स्क्रूचा वापर करून माउंटिंग ब्रॅकेट भिंतीवर सुरक्षित करा.
- Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.
5.3. Pairing with a Security System
Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:
- Putting your security system into "pairing" or "enrollment" mode.
- Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
- Confirming successful pairing through the system's interface or LED indicators.
४. सेन्सर चालवणे
6.1. Detection Principle
The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.
३. एलईडी इंडिकेटर स्थिती
- Brief Flash: Indicates motion detection.
- Continuous Flash: May indicate low battery or a fault. Refer to the troubleshooting section.
- प्रकाश नाही: Normal standby mode, or battery is completely depleted.
6.3. Detection Range and Coverage
The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view rather than directly towards it.
7. देखभाल
७.२. साफसफाई
Periodically clean the sensor's lens and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.
7.2. बॅटरी बदलणे
When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.
५. नियमित तपासणी
Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.
8. समस्या निवारण
| समस्या | संभाव्य कारण | उपाय |
|---|---|---|
| सेन्सर हालचाल शोधत नाही. |
|
|
| खोटे अलार्म. |
|
|
| LED indicator flashing continuously. | कमी बॅटरी. | बॅटरी बदला. |
| Sensor not communicating with the security system. |
|
|
9. तपशील
- ब्रँड: इंटेलब्रास
- मॉडेल: IVP2000SF
- उर्जा स्त्रोत: बॅटरीवर चालणारी
- बॅटरी प्रकार: अल्कधर्मी
- माउंटिंग प्रकार: भिंत माउंट
- सुसंगत उपकरणे: Intelbras security systems and smart home hubs
- उत्पादन परिमाणे: अंदाजे 17 x 10 x 9 सेमी (6.7 x 3.9 x 3.5 इंच)
- शोध पद्धत: निष्क्रिय इन्फ्रारेड (PIR)
- शोध श्रेणी: 12 मीटर (39 फूट) पर्यंत
- शोध कोन: अंदाजे 90 अंश
- ऑपरेटिंग वातावरण: फक्त अंतर्गत वापर
10. वॉरंटी माहिती
Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras webसाइटवर जा किंवा त्यांच्या ग्राहक समर्थनाशी संपर्क साधा. वॉरंटी दाव्यांसाठी खरेदीचा पुरावा ठेवा.
11. समर्थन
If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels:
- Webसाइट: Visit the official Intelbras webसमर्थन संसाधने, वारंवार विचारले जाणारे प्रश्न आणि संपर्क माहितीसाठी साइट.
- फोन: Refer to the contact section on the Intelbras webस्थानिक समर्थन क्रमांकांसाठी साइट.