Beleeb BLB-C30 Series Variable Current Voltage बॅटरी चार्जर वापरकर्ता मॅन्युअल

1. उत्पादन संपलेview

The Beleeb BLB-C30 Battery Charger is a versatile automotive maintainer designed for lead-acid batteries ranging from 12V to 72V and capacities of 40Ah to 200Ah. It features manual adjustment for both voltage and current, allowing precise control over the charging process. Equipped with essential safety features and a smart cooling system, this charger is suitable for a wide array of vehicles including cars, trucks, golf carts, RVs, marine vessels, yachts, mowers, and vehicles with AGM, SLA, ATV, or ISS lead-acid batteries.

Figure 1: Beleeb BLB-C30 Battery Charger with its main components and accessories.

Figure 2: The Beleeb BLB-C30 charger is suitable for a wide range of 12-72V battery charging applications across different vehicle types.

2. सुरक्षितता माहिती

Read all safety warnings and instructions before using the battery charger. Failure to follow the warnings and instructions may result in electric shock, fire, and/or serious injury.

2.1 सामान्य सुरक्षा खबरदारी

• Always operate the charger in a well-ventilated area.
• Keep the charger away from flammable materials and liquids.
• चार्जरला पाऊस किंवा ओल्या स्थितीत उघड करू नका.
• Ensure the charger is unplugged from the power outlet before making or breaking connections to the battery.
• Avoid touching the battery terminals or charger output terminals with bare hands when the charger is powered on.

2.2 Battery Compatibility and Warnings

• This charger is suitable for 12V/24V/36V/48V/60V/72V lead-acid batteries of 40 एएच -200 एएच क्षमता
• चेतावणी: Batteries lower than 9V or over 200Ah are not suitable for this charger, as it may lead to overload or damage.
• चेतावणी: It is not recommended to charge lithium batteries or sealed deep cycle batteries (e.g., 6V/225Ah, 6V/240Ah, 6V/200Ah, 8V/183Ah) with this device.
• खबरदारी: चार्जिंग व्हॉल्यूमtage selected on the charger आवश्यक match the battery voltagई चुकीचे खंडtage selection will blow the fuse.

Figure 3: Ensure the charging voltage बॅटरी व्हॉलशी जुळतेtage to prevent fuse damage. Not suitable for batteries above 200Ah.

३. उत्पादन वैशिष्ट्ये आणि घटक

The Beleeb BLB-C30 charger is designed with user-friendly controls and integrated safety features.

Figure 4: Labeled diagram of the charger's front and rear panels, highlighting key components.

• Ammeter: Displays the charging current. The needle will move towards zero as the battery charges.
• पोर्टेबल हँडल: For easy transport of the unit.
• पॉवर स्विच (चालू/बंद): Controls the main power to the charger.
• Ampere Control Knob: Adjusts the charging speed (LOW, MEDIUM, HIGH).
• आउटपुट टर्मिनल: Connect the red (+) and black (-) battery clips.
• खंडtage Setting Button: Manually select the output voltage (12V, 24V, 36V, 48V, 60V, 72V) to match your battery.
• स्मार्ट कूलिंग फॅन: Automatically activates when the heatsink temperature is between 104°F and 149°F (40°C - 65°C) to prevent overheating.
• ओव्हरलोड रीसेट बटण: Resets the charger in case of an overload.
• Fuse Button: Access point for the internal fuse.
• AC Input 110V: Power input for the charger.

3.1 संरक्षण वैशिष्ट्ये

Figure 5: The charger incorporates multiple protection mechanisms for safe operation.

• अति तापमान संरक्षण: The smart cooling fan helps regulate internal temperature.
• ओव्हर व्हॉलtagई संरक्षण: जास्त व्हॉल्यूममुळे होणारे नुकसान टाळतेtage.
• वर्तमान संरक्षणावर: Safeguards against drawing too much current.
• शॉर्ट सर्किट संरक्षण: Protects against short circuits at the output terminals.
• Reverse Wiring Protection: Prevents damage if battery clips are connected incorrectly.

4. सेटअप आणि कनेक्शन

Follow these steps to properly set up and connect your Beleeb BLB-C30 battery charger.

1. बॅटरी तयार करा: Before connecting, ensure your battery is a lead-acid type within the 40Ah-200Ah capacity range and its voltage 9V वर आहे.
2. Connect Charger to Battery:
   • Connect the red (+) battery clip to the positive terminal of the battery.
   • Connect the black (-) battery clip to the negative terminal of the battery.
   • कनेक्शन सुरक्षित असल्याची खात्री करा.
3. सेट व्हॉलtage स्तर: वळवा खंडtage Setting Button to match the voltage of your battery (e.g., 12V for a 12V battery, 48V for four 12V batteries in series).
4. सेट करा Ampere Level: ठेवा Ampere Control Knob on "LOW" initially, especially for fully discharged batteries, to prevent blowing the fuse.
5. पॉवर आउटलेटमध्ये प्लग इन करा: Plug the charger's power cable into a 110V AC power outlet.

आकृती 6: तपशीलवार view of the charger's controls for voltage आणि ampपूर्व सेटिंग्ज.

5. ऑपरेटिंग सूचना

Once connected, follow these steps to begin and complete the charging process.

1. पॉवर चालू: वळवा पॉवर स्विच to the "ON" position (the button will turn red).
2. चार्जिंग मोड निवडा: समायोजित करा Ampere Control Knob to select your desired charging rate:
   • "LOW" or "MEDIUM" for normal charging.
   • "HIGH" for accelerated (fast) charging.

   Note: The nominal theoretical maximum current varies by voltage: 12V-16A, 24V-12A, 36V-10A, 48V-8A, 60V-7A, 72V-6A.

3. मॉनिटर चार्जिंग: While charging, observe the Ammeter needle. It will constantly move towards the left (approaching zero) as the battery charges.
4. फ्लोट चार्जिंग: जेव्हा द ampere needle reaches almost zero, the battery is fully charged. The charger will automatically switch to float charging mode for maintenance.
5. चार्जर डिस्कनेक्ट करा:
   • First, turn the पॉवर स्विच to "OFF".
   • Then, unplug the charger from the power outlet.
   • Finally, remove the charging clips from the battery terminals.

6. देखभाल

योग्य देखभाल तुमच्या चार्जरचे दीर्घायुष्य आणि इष्टतम कामगिरी सुनिश्चित करते.

• स्वच्छता: Regularly wipe the exterior of the charger with a dry, soft cloth. Do not use harsh chemicals or abrasives.
• स्टोरेज: वापरात नसताना चार्जर थंड, कोरड्या जागी ठेवा. थेट सूर्यप्रकाश आणि अति तापमानापासून दूर ठेवा.
• कूलिंग फॅन: The smart cooling fan will automatically activate when the heatsink temperature is between 104°F and 149°F (40°C - 65°C). Ensure the fan vents are not obstructed during operation.
• फ्यूज तपासणी: If the charger is not functioning, check the fuse button and overload button. Refer to the troubleshooting section for more details.

7. समस्या निवारण

If you encounter issues with your Beleeb BLB-C30 charger, refer to the following common problems and solutions.

8. तपशील

9. हमी आणि समर्थन

The Beleeb BLB-C30 Battery Charger is designed for long-term service when used correctly. For any questions, concerns, or support needs regarding your product, please refer to your order history on the platform where the purchase was made. This will allow you to directly contact the seller for assistance.

वॉरंटी दाव्यांसाठी खरेदीचा पुरावा म्हणून कृपया तुमची खरेदी पावती जपून ठेवा.