Cisco CP-68KEM-3PCC Expansion Module User Manual

1. परिचय

This manual provides instructions for the installation, operation, and maintenance of the Cisco CP-68KEM-3PCC Expansion Module. This module is designed to enhance the functionality of your Cisco IP Phone 6851 by providing additional programmable keys.

Figure 1: Cisco CP-68KEM-3PCC Expansion Module. This image shows the front view of the expansion module with its grayscale LCD screen and programmable keys.

The Cisco CP-68KEM-3PCC Expansion Module adds 14-line keys and 2-page keys, totaling 28 additional keys, with an easy-to-read grayscale LCD screen. It is ideal for monitoring and managing call status, directory numbers, and speed dial functions.

२. बॉक्समध्ये काय आहे?

बॉक्स काळजीपूर्वक उघडा आणि सर्व वस्तू तिथे असल्याची खात्री करा:

Cisco CP-68KEM-3PCC Phone Expansion Module
Connecting Cable (typically included for linking to the phone)
Documentation (this user manual, safety information)

If any items are missing or damaged, please contact your vendor or Cisco support immediately.

४. सेटअप सूचना

Follow these steps to connect your Cisco CP-68KEM-3PCC Expansion Module to your Cisco IP Phone 6851.

Prepare the IP Phone: Ensure your Cisco IP Phone 6851 is powered off and disconnected from the network.
Connect the Expansion Module: Locate the expansion port on the back or side of your Cisco IP Phone 6851. Connect the provided connecting cable from the expansion module to this port.
कनेक्शन सुरक्षित करा: Ensure the cable is securely fastened to prevent accidental disconnection.
पॉवर चालू: Reconnect your Cisco IP Phone 6851 to the network and power it on. The expansion module should be detected automatically.
कार्यक्षमता सत्यापित करा: Once the phone has booted, check the expansion module's display and keys to ensure they are responsive.

For detailed visual instructions, refer to the official Cisco documentation or support webसाइट

4. Operating the Expansion Module

The expansion module provides additional keys for various functions, enhancing your call management capabilities.

4.1 प्रोग्राम करण्यायोग्य की

The 28 programmable keys (14 keys across 2 pages) can be configured for:

Directory Numbers (DNs): Assign specific phone lines or extensions.
शीघ्र डायल: जलद प्रवेशासाठी प्रोग्राम वारंवार कॉल केलेले नंबर.
Feature Keys: Assign functions like call transfer, conference, or call park.
Call Status Monitoring: Monitor the status of other lines (e.g., busy, ringing).

4.2 Page Navigation

Use the dedicated page keys (usually located near the display) to switch between the two pages of programmable keys. The grayscale LCD screen will update to show the labels for the currently active page.

4.3 कॉन्फिगरेशन

Configuration of the programmable keys is typically managed through your organization's phone system administrator or via the web interface of the Cisco IP Phone 6851. Consult your IT department for specific configuration instructions.

5. देखभाल

To ensure the longevity and optimal performance of your Cisco CP-68KEM-3PCC Expansion Module, follow these maintenance guidelines:

स्वच्छता: Use a soft, dry, lint-free cloth to clean the exterior surfaces. For stubborn marks, slightly dampकपड्याला पाण्याने धुवा. कठोर रसायने, अपघर्षक क्लीनर किंवा सॉल्व्हेंट्स वापरणे टाळा, कारण ते फिनिश आणि इलेक्ट्रॉनिक घटकांना नुकसान पोहोचवू शकतात.
पर्यावरण: Keep the module in a clean, dry environment, away from direct sunlight, excessive heat, and moisture.
हाताळणी: Handle the module with care. Avoid dropping it or subjecting it to strong impacts.
केबल व्यवस्थापनः Ensure connecting cables are not kinked, pinched, or under strain.

There are no user-serviceable parts inside the expansion module. Do not attempt to open or repair the device yourself.

6. समस्या निवारण

If you encounter issues with your expansion module, try the following troubleshooting steps:

समस्या	संभाव्य कारण	उपाय
Module not recognized by phone	Loose cable connection, phone not restarted, incompatible phone model.	Ensure the connecting cable is securely plugged into both the module and the IP phone. Restart the IP phone. Verify that your IP phone is a Cisco IP Phone 6851.
कळा प्रतिसाद देत नाहीत	Software glitch, configuration issue.	Restart the IP phone. Contact your system administrator to check the key configuration.
डिस्प्ले रिकामा आहे किंवा चमकत आहे	वीज समस्या, अंतर्गत बिघाड.	Ensure the IP phone is receiving adequate power. Restart the IP phone. If the problem persists, contact Cisco support.

If these steps do not resolve the issue, please contact Cisco technical support or your authorized reseller.

7. तपशील

वैशिष्ट्य	तपशील
मॉडेल क्रमांक	CP-68KEM-3PCC
ब्रँड	सिस्को
सुसंगत साधने	सिस्को आयपी फोन 6851
रंग	काळा
साहित्य	धातू
आयटमचे परिमाण (LxWxH)	5.1 x 10.2 x 20.3 सेमी
उर्जा स्त्रोत	Corded (powered via host IP Phone)
कळांची संख्या	28 (14 keys across 2 pages)
डिस्प्ले	Grayscale LCD
GTIN/UPC	889728068383

8. वॉरंटी माहिती

The Cisco CP-68KEM-3PCC Expansion Module comes with a 2 वर्षांची उत्पादन वॉरंटी from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or external causes.

For warranty claims or detailed terms and conditions, please refer to the official Cisco warranty policy available on their webतुमच्या खरेदी केंद्राशी संपर्क साधा किंवा संपर्क साधा.

9. समर्थन

For technical assistance, product information, or to report issues, please contact Cisco support:

सिस्को सपोर्ट Webसाइट: अधिकाऱ्याला भेट द्या सिस्को सपोर्ट webसाइट for documentation, downloads, and contact options.
Authorized Reseller: Contact the reseller from whom you purchased the product.

When contacting support, please have your product model (CP-68KEM-3PCC) and serial number ready.