Utilitech 38971

Utilitech 36-in Under Cabinet LED Light Bar Instruction Manual

Model: 38971 | Brand: Utilitech

परिचय

This manual provides detailed instructions for the installation, operation, and maintenance of your Utilitech 36-inch Under Cabinet LED Light Bar. Please read this manual thoroughly before installation and keep it for future reference. This LED light bar is designed to provide efficient and warm white illumination for your indoor spaces, particularly under cabinets.

सुरक्षितता माहिती

उत्पादनाला इजा किंवा नुकसान टाळण्यासाठी कृपया खालील सुरक्षा खबरदारी पाळा:

  • Always disconnect power at the circuit breaker before installation, servicing, or cleaning.
  • हे उत्पादन हेतू आहे फक्त अंतर्गत वापर. Do not expose to water or moisture.
  • Ensure all electrical connections comply with local codes and ordinances. If you are unsure, consult a qualified electrician.
  • Do not attempt to modify or disassemble the light fixture. There are no user-serviceable parts inside.
  • Avoid looking directly into the LED light source when it is illuminated, as it may cause eye strain.
  • पॅकेजिंग साहित्य मुलांच्या आवाक्याबाहेर ठेवा.

पॅकेज सामग्री

स्थापना सुरू करण्यापूर्वी सर्व घटक उपस्थित आहेत याची खात्री करा:

  • Utilitech 36-inch Under Cabinet LED Light Bar (1)
  • रिमोट कंट्रोल (1)
  • माउंटिंग हार्डवेअर (स्क्रू, अँकर)
  • सूचना पुस्तिका (हा दस्तऐवज)
Utilitech 36-inch Under Cabinet LED Light Bar

Image: The Utilitech 36-inch Under Cabinet LED Light Bar, showing its slim profile and white finish.

सेटअप आणि स्थापना

The Utilitech LED Light Bar is designed for semi-flush under-cabinet mounting. Follow these steps for proper installation:

  1. स्थापना क्षेत्र तयार करा: Choose a suitable location under a cabinet. Ensure there is a power outlet nearby for the corded electric connection. Clean the mounting surface.
  2. मार्क माउंटिंग पॉइंट्स: Hold the light bar in the desired position and mark the locations for the mounting screws. Use a pencil to mark through the mounting holes on the fixture.
  3. पायलट छिद्र ड्रिल करा: Using an appropriate drill bit for your cabinet material, drill pilot holes at the marked locations. If mounting into drywall, use the provided wall anchors.
  4. Secure the Light Bar: Align the light bar with the pilot holes and secure it using the provided mounting screws. Ensure the fixture is firmly attached and level.
  5. पॉवरशी कनेक्ट करा: Plug the light bar's power cord into a standard 110-volt electrical outlet.

टीप: For a clean installation, consider routing the power cord discreetly using cable clips (not included) or by drilling a small hole through the cabinet if permissible and safe.

ऑपरेटिंग सूचना

Your Utilitech LED Light Bar is controlled via the included remote control.

  • पॉवर चालू/बंद: दाबा ON button on the remote to turn the light bar on. Press the बंद ते बंद करण्यासाठी बटण.
  • ब्राइटनेस ऍडजस्टमेंट: वापरा + आणि - buttons on the remote to increase or decrease the brightness of the light. The light bar provides up to 800 lumens of warm white light.
  • रिमोट कंट्रोल रेंज: Ensure the remote control is pointed towards the light bar for optimal signal reception. The effective range may vary depending on obstacles.

देखभाल

The Utilitech LED Light Bar requires minimal maintenance.

  • स्वच्छता: Before cleaning, ensure the light bar is unplugged from the power outlet. Wipe the fixture with a soft, dry, or slightly damp cloth. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as they may damage the finish.
  • एलईडी लाइट स्रोत: The LED light source is integrated and non-removable. It is designed for long-lasting performance and does not require bulb replacement.

समस्यानिवारण

If you encounter issues with your light bar, refer to the following common problems and solutions:

समस्यासंभाव्य कारणउपाय
लाईट बार चालू होत नाही.
  • आउटलेटला वीज नाही.
  • रिमोट कंट्रोलची बॅटरी संपली आहे.
  • Remote control not paired or faulty.
  • Check the power outlet and circuit breaker.
  • रिमोट कंट्रोल बॅटरी बदला.
  • Ensure remote is pointed at the light bar. If issues persist, contact customer support.
प्रकाश मंद आहे किंवा लुकलुकत आहे.
  • Brightness setting is low.
  • सैल वीज कनेक्शन.
  • रिमोट कंट्रोल वापरून ब्राइटनेस वाढवा.
  • पॉवर कॉर्ड सुरक्षितपणे प्लग इन असल्याची खात्री करा.
रिमोट कंट्रोल प्रतिसाद देत नाही.
  • बॅटरी संपली आहे किंवा चुकीच्या पद्धतीने घातली आहे.
  • Obstruction between remote and light bar.
  • Replace battery and check polarity.
  • कोणतेही अडथळे दूर करा.

तपशील

वैशिष्ट्यतपशील
ब्रँडयुटिलिटेक
मॉडेल क्रमांक38971
उत्पादन परिमाणे36.5 x 3.25 x 1.5 इंच
आयटम वजन2.2 पाउंड
उर्जा स्त्रोतकॉर्ड केलेले इलेक्ट्रिक
खंडtage110 व्होल्ट
वाटtage9.21 वॅट्स
चमक800 लुमेन
हलका रंगउबदार पांढरा
प्रकाश स्रोत प्रकारLED (Non-Removable)
नियंत्रण पद्धतरिमोट कंट्रोल
स्थापना प्रकारSemi Flush Mount / Under Cabinet
इनडोअर/आउटडोअर वापरइनडोअर
समाप्त प्रकारघासले
सावली साहित्यधातू
विधानसभा आवश्यकनाही

हमी माहिती

This Utilitech product comes with a limited warranty. Please refer to the warranty card included with your product packaging for specific terms, conditions, and duration of the warranty. Keep your purchase receipt as proof of purchase for any warranty claims.

ग्राहक समर्थन

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact Utilitech customer support. Contact information can typically be found on the product packaging or the manufacturer's official webसाइट

निर्माता: युटिलिटेक

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.