Geko 6T Bottle Jack (Model G01053) User Manual

1. उत्पादन संपलेview

The Geko 6T Bottle Jack (Model G01053) is a robust hydraulic lifting device designed for heavy goods and industrial vehicles. It features a lifting capacity of up to 6 tons and is constructed from high-quality alloy steel for durability and reliability.

Figure 1: Geko 6T Bottle Jack with its two-piece handle.

आकृती 2: बाजू view of the Geko 6T Bottle Jack, highlighting its compact design.

2. महत्वाची सुरक्षितता माहिती

Read and understand all safety warnings and operating instructions before using this bottle jack. Failure to follow these instructions may result in property damage, personal injury, or death.

सामान्य सुरक्षा खबरदारी

• Always operate the jack on a hard, level surface.
• भार जॅक सॅडलवर केंद्रित असल्याची खात्री करा.
• Never exceed the rated lifting capacity of 6 tons.
• Do not use the jack as a permanent support device. Always use appropriate jack stands to support the load after lifting.
• Keep hands and feet clear of the jack and the load during operation.
• योग्य वैयक्तिक संरक्षक उपकरणे (पीपीई) घाला, जसे की सुरक्षा चष्मा आणि हातमोजे.
• प्रत्येक वापरापूर्वी जॅक खराब झाला आहे की नाही याची तपासणी करा. खराब झाल्यास वापरू नका.
• लहान मुले आणि अनधिकृत व्यक्तींना कामाच्या क्षेत्रापासून दूर ठेवा.
• जॅकमध्ये कोणत्याही प्रकारे सुधारणा करू नका.

Lifting and Lowering Safety

• वाहन उचलण्यापूर्वी त्याचा पार्किंग ब्रेक चालू आहे आणि चाके बंद आहेत याची खात्री करा.
• वाहन निर्मात्याने निर्दिष्ट केलेल्या क्षेत्रांवरच लिफ्ट करा.
• हळूहळू आणि काळजीपूर्वक लोड कमी करा.

3. सेटअप

Before using the Geko 6T Bottle Jack, ensure it is properly prepared for operation.

अनपॅकिंग आणि तपासणी

1. Carefully remove the jack and its components from the packaging.
2. Inspect the jack for any signs of shipping damage. If damage is found, do not use the jack and contact your supplier.
3. Verify that all components, including the two-piece handle, are present.

हँडल एकत्र करणे

1. Insert the smaller handle section into the larger handle section.
2. Ensure the handle is securely connected before use.

4. ऑपरेटिंग सूचना

Follow these steps for safe and effective operation of your Geko 6T Bottle Jack.

Lifting a Load

1. तयारी: Position the jack on a hard, level surface directly under the lifting point of the load as specified by the manufacturer. Ensure the load is stable and cannot roll or shift.
2. रिलीज व्हॉल्व्ह बंद करा: Turn the release valve (typically a screw or knob at the base) clockwise until it is firmly closed. Do not overtighten.
3. जॅकची स्थिती: Ensure the jack saddle is centered under the lifting point.
4. पंप हँडल: Insert the handle into the pump sleeve. Pump the handle up and down steadily to raise the jack's ram and lift the load.
5. Monitor Lift: Continue pumping until the load reaches the desired height. Do not lift beyond the maximum extension marked on the ram.
6. सुरक्षित लोड: Immediately place appropriate jack stands under the load for support. The jack is for lifting only, not for sustained support.

भार कमी करणे

1. Raise Slightly: If the load is on jack stands, slightly raise the load with the bottle jack to remove pressure from the stands.
2. Remove Jack Stands: Carefully remove the jack stands from under the load.
3. ओपन रिलीज व्हॉल्व्ह: Slowly turn the release valve counter-clockwise to gradually lower the load. Control the descent speed by adjusting how much the valve is opened.
4. Full Lowering: Continue lowering until the load is fully supported on the ground or its wheels.
5. Retract Ram: Once the load is fully lowered, fully open the release valve and gently push the ram down if it does not retract completely on its own.

5. देखभाल

Regular maintenance ensures the longevity and safe operation of your Geko 6T Bottle Jack.

स्नेहन

• Periodically lubricate moving parts, such as the pump mechanism and ram, with light machine oil.
• Check the hydraulic oil level every three months. To do this, fully lower the ram, remove the oil filler plug, and ensure the oil level is just below the filler hole. Top up with hydraulic jack oil if necessary.

स्वच्छता आणि स्टोरेज

• Keep the jack clean and free from dirt, grease, and moisture.
• Store the jack in a dry, protected area with the ram fully retracted.

तपासणी

• Before each use, inspect the jack for any signs of damage, leaks, or wear. Pay close attention to welds, the ram, and the base.
• If any damage is found, do not use the jack and have it repaired by qualified personnel.

6. समस्या निवारण

This section addresses common issues you might encounter with your Geko 6T Bottle Jack.

If you encounter problems not listed here or if solutions do not resolve the issue, contact Geko customer support or a qualified service technician.

7. तपशील

• मॉडेल: G01053
• ब्रँड: गेको
• उचलण्याची क्षमता: 6 टन
• साहित्य: मिश्र धातु स्टील
• रंग: काळा
• आयटम वजन: 4.08 किलोग्रॅम
• पॅकेजचे परिमाण: 41 x 35 x 35 सेमी
• निर्माता: फर्मा हँडलोवा गेको
• International Article Number (EAN): 05901477113673

8. हमी आणि समर्थन

Geko products are manufactured to high standards and are subject to rigorous quality control.

हमी माहिती

Specific warranty terms and conditions may vary by region and retailer. Please refer to your purchase documentation or contact your retailer for detailed warranty information. Keep your proof of purchase for any warranty claims.

ग्राहक समर्थन

For technical assistance, spare parts, or service inquiries, please contact your local Geko distributor or the retailer from whom you purchased the product.

Manufacturer: Firma Handlowa GEKO