Airam LED Cabinet Lamp 1.2W सूचना पुस्तिका

1. परिचय

This manual provides essential instructions for the safe and efficient use of your Airam LED Cabinet Lamp 1.2W. This battery-operated lamp features a PIR motion sensor, automatically illuminating when motion is detected, making it ideal for cabinets, drawers, and other enclosed spaces. Please read this manual thoroughly before installation and operation.

2. सेटअप

2.1 पॅकेज सामग्री

पुढे जाण्यापूर्वी, सर्व घटक उपस्थित असल्याची खात्री करा:

• Airam LED Cabinet Lamp 1.2W
• Mounting hardware (screws or adhesive strips, typically included in packaging)

Figure 1: Airam LED Cabinet Lamp in its retail packaging, showing the lamp and typical mounting accessories.

2.2 बॅटरी इंस्टॉलेशन

The Airam LED Cabinet Lamp requires 4 x AA 1.5V batteries (not included).

1. Locate the battery compartment cover on the back or side of the lamp.
2. कंपार्टमेंट उघडण्यासाठी कव्हर सरकवा किंवा अनक्लिप करा.
3. Insert 4 AA batteries, ensuring correct polarity (+ and - terminals match the markings inside the compartment).
4. बॅटरी कंपार्टमेंट कव्हर सुरक्षितपणे बंद करा.

2.3 Mounting the Lamp

एलamp can be mounted using screws or adhesive strips, depending on the included hardware and your preference. Choose a location where the motion sensor has a clear line of sight to the area where movement is expected (e.g., inside a cabinet door, above a drawer).

आकृती 2: समोर view of the Airam LED Cabinet Lamp, highlighting the central motion sensor.

Using Screws (if applicable):

1. Mark the desired mounting position.
2. Drill pilot holes if necessary, matching the lamp's mounting holes.
3. एल सुरक्षित कराamp प्रदान केलेले स्क्रू वापरुन.

Using Adhesive Strips (if applicable):

1. माउंटिंग पृष्ठभाग कोरडे आणि धूळ किंवा ग्रीसपासून मुक्त आहे याची खात्री करण्यासाठी ते पूर्णपणे स्वच्छ करा.
2. Peel the protective backing from the adhesive strips.
3. Firmly press the lamp onto the desired surface for at least 30 seconds.

3. ऑपरेशन

The Airam LED Cabinet Lamp is designed for automatic operation using its integrated PIR (Passive Infrared) motion sensor.

1. Once batteries are installed and the lamp is mounted, it will enter standby mode.
2. When the PIR motion sensor detects movement within its range (e.g., opening a cabinet door or drawer), the LED lights will automatically turn on.
3. एलamp will remain illuminated for approximately 25 seconds after motion is detected.
4. If no further motion is detected within this period, the lamp will automatically turn off to conserve battery power.
5. If continuous motion is detected, the lamp will remain on until motion ceases for 25 seconds.

टीप: Ensure the motion sensor is not obstructed for optimal performance.

4. देखभाल

4.1 बॅटरी बदलणे

When the light output diminishes or the lamp stops functioning, it is time to replace the batteries. Refer to section 2.2 बॅटरी इंस्टॉलेशन तपशीलवार सूचनांसाठी.

• नेहमी एकाच वेळी सर्व ३ AA बॅटरी बदला.
• जुन्या आणि नवीन बॅटरी किंवा वेगवेगळ्या प्रकारच्या बॅटरी एकत्र करू नका.
• वापरलेल्या बॅटरीची स्थानिक नियमांनुसार जबाबदारीने विल्हेवाट लावा.

4.2 स्वच्छता

एलamp is constructed from polycarbonate and ABS plastic. To clean the lamp:

• पृष्ठभाग मऊ, कोरड्या किंवा किंचित घासून पुसून टाका.amp कापड
• Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the plastic finish or the sensor.
• Ensure no liquid enters the battery compartment or sensor area.

5. समस्या निवारण

6. तपशील

7. हमी आणि समर्थन

Specific warranty information may vary by region and retailer. Please refer to your purchase documentation or contact your point of sale for details regarding warranty coverage.

For technical support or further assistance, please contact the manufacturer, Bot Lighting, or your retailer. Keep your purchase receipt as proof of purchase.