Amazon Basics DS-110SAM Small Slim Desk Drawer Security Safe User Manual

परिचय

This manual provides essential instructions for the setup, operation, and maintenance of your Amazon Basics Small Slim Desk Drawer Security Safe. Please read this manual thoroughly before using the safe to ensure proper function and security. Keep this manual for future reference.

महत्वाची सुरक्षितता माहिती

• Do not store the emergency override keys inside the safe. Keep them in a secure, separate location.
• अनधिकृतपणे काढता येणार नाही यासाठी तिजोरी सुरक्षितपणे बसवली आहे याची खात्री करा.
• This safe is designed for security against theft and unauthorized access. It is not fireproof or waterproof. For fire or water protection, consider additional protective measures.
• Keep the keypad dry and clean. Avoid using abrasive cleaners.

पॅकेज सामग्री

• Amazon Basics DS-110SAM Security Safe
• आपत्कालीन ओव्हरराइड की (२)
• माउंटिंग हार्डवेअर (स्क्रू, अँकर)
• सूचना पुस्तिका (हा दस्तऐवज)

सेटअप

1. बॅटरी इन्स्टॉलेशन

1. Open the safe using one of the emergency override keys. Insert the key into the keyhole located behind the keypad cover, turn it clockwise, and rotate the knob to open the door.
2. तिजोरीच्या दरवाजाच्या आतील बाजूस बॅटरीचा डबा शोधा.
3. योग्य ध्रुवीयता (+/-) सुनिश्चित करून, ४ नवीन AA बॅटरी घाला.
4. बॅटरी कंपार्टमेंट कव्हर बंद करा.

१. तुमचा वैयक्तिक कोड सेट करणे

Your safe comes with a factory default code (usually 1-5-9). It is highly recommended to change this immediately.

1. With the safe door open, press the red reset button located on the inside of the door, near the hinges. You will hear a beep.
2. On the keypad, enter your new personal code (3 to 8 digits).
3. दाबा आणि धरा the '#' button to confirm. You will hear a confirmation beep.
4. Test your new code with the door open before closing it. Enter your code, then press '#'. The green light should illuminate, allowing you to turn the knob and retract the bolts.

५.२. तिजोरी बसवणे

For enhanced security, the safe can be mounted to a drawer or other flat surface using the pre-drilled holes and included hardware.

Image: Back of the safe with pre-drilled mounting holes.

1. Choose a suitable location, such as inside a desk drawer, where the safe can be securely fastened.
2. Mark the positions for the mounting holes on the chosen surface using the safe's pre-drilled holes as a template.
3. Drill pilot holes into the surface.
4. Align the safe with the pilot holes and secure it using the provided screws and anchors. Ensure the safe is firmly attached.

Image: The safe positioned within a desk drawer, demonstrating its intended use.

तिजोरी चालवणे

प्रतिमा: समोर view of the safe, highlighting the electronic keypad and locking mechanism.

१. इलेक्ट्रॉनिक कीपॅडने उघडणे

1. Enter your personal code (3 to 8 digits).
2. Press the '#' button. The green light will illuminate.
3. ५ सेकंदात, तिजोरीचा दरवाजा उघडण्यासाठी नॉब घड्याळाच्या दिशेने फिरवा.

2. Opening with Emergency Override Key

Use this method if you forget your code or if the batteries are depleted.

Image: Close-up of the keypad with an emergency key in use.

1. Gently remove the keypad cover to reveal the keyhole.
2. Insert one of the emergency override keys into the keyhole.
3. Turn the key clockwise and simultaneously turn the knob to open the safe door.
4. एकदा उघडल्यानंतर, गरज पडल्यास तुम्ही बॅटरी बदलू शकता किंवा तुमचा कोड रीसेट करू शकता.

३. तिजोरी बंद करणे आणि कुलूप लावणे

1. सुरक्षित दरवाजा बंद करा.
2. Turn the knob counter-clockwise to engage the locking bolts. The safe is now locked.

Image: Detail of the live-door bolts, which provide security when the safe is locked.

देखभाल

1. बॅटरी बदलणे

When the batteries are low, the red light on the keypad may flash or the safe may not respond. Replace all 4 AA batteries promptly to ensure continuous operation. Follow the battery installation steps in the Setup section.

७.२. साफसफाई

तिजोरीचा बाहेरील भाग मऊ, ड ने पुसून टाका.amp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish or electronic components.

समस्यानिवारण

• कोडसह तिजोरी उघडत नाही:
  • बॅटरी ताजे आणि योग्यरित्या स्थापित असल्याची खात्री करा.
  • Verify you are entering the correct code and pressing '#' firmly.
  • Try using the emergency override key.
• कीपॅड प्रतिसाद देत नाही:
  • बॅटरी बदला.
  • बटणांमध्ये कोणताही कचरा अडथळा आणत नाही याची खात्री करा.
• दरवाजा व्यवस्थित बंद होत नाही:
  • तिजोरीच्या आत किंवा दरवाजाच्या चौकटीभोवती कोणतेही अडथळे आहेत का ते तपासा.
  • Ensure the locking bolts are fully retracted before attempting to close.

तपशील

हमी माहिती

For information regarding the warranty for your Amazon Basics product, please refer to the documentation included with your purchase or visit the official Amazon Basics webसाइट. वॉरंटी अटी आणि शर्ती वेगवेगळ्या असू शकतात.

ग्राहक समर्थन

If you have any questions, require assistance, or need to report an issue with your Amazon Basics safe, please contact Amazon customer support through their official webसाइट किंवा तुमच्या खरेदीसह प्रदान केलेली संपर्क माहिती.