DSTE MH26A

DSTE MH26A Multi-Battery Charger User Manual

Model: MH26A

1. परिचय

This manual provides detailed instructions for the safe and efficient operation of your DSTE MH26A Multi-Battery Charger. This charger is designed to charge various camera batteries, including Nikon EN-EL18, EN-EL4, and Canon LP-E4, LP-E4N, LP-E19 series batteries.

पॅकेज सामग्री:

  • 1x DSTE MH26A Battery Charger
  • 1x BA-T10 Adapter for Nikon EN-EL4 / EN-EL4A batteries
  • 1x BA-T20 Adapter for Canon LP-E4 / LP-E4N / LP-E19 batteries
  • 1x AC Power Line (91.5cm)
DSTE MH26A Multi-Battery Charger with power cord and two battery adapters

Figure 1: DSTE MH26A Multi-Battery Charger, including the main unit, power cord, BA-T10 adapter for Nikon EN-EL4/EN-EL4A, and BA-T20 adapter for Canon LP-E4/LP-E4N/LP-E19 batteries.

2. सुरक्षितता खबरदारी

  • Use only with specified rechargeable batteries.
  • नॉन-रिचार्ज करण्यायोग्य बॅटरी चार्ज करण्याचा प्रयत्न करू नका.
  • चार्जर टर्मिनल्समध्ये शॉर्ट सर्किट टाळा.
  • चार्जरला पाऊस किंवा ओलावा उघड करू नका.
  • चार्जर वेगळे करू नका. सर्व सर्व्हिसिंग पात्र कर्मचाऱ्यांना द्या.
  • चार्जिंग दरम्यान योग्य वायुवीजन सुनिश्चित करा.
  • मुलांच्या आवाक्याबाहेर ठेवा.
Back label of DSTE MH26A charger showing electrical specifications and safety warnings in multiple languages.

Figure 2: Rear label of the DSTE MH26A charger, detailing input/output specifications and important safety warnings regarding electric shock and fire hazards.

3. सेटअप आणि स्थापना

  1. वीज कनेक्ट करा: Plug the AC power line into the charger's input port and then into a standard AC 100V-240V wall outlet.
  2. (आवश्यक असल्यास) अ‍ॅडॉप्टर निवडा:
    • For Nikon EN-EL4 / EN-EL4A batteries, insert the BA-T10 adapter into one of the charger's battery slots.
    • For Canon LP-E4 / LP-E4N / LP-E19 batteries, insert the BA-T20 adapter into one of the charger's battery slots.
    • Nikon EN-EL18 / EN-EL18a batteries can be inserted directly into the charger slots without an adapter. Note: This charger is not compatible with DSTE brand EN-EL18A batteries.
  3. बॅटरी घाला: Carefully slide the battery (or battery with adapter) into the designated charging slot. Ensure the battery contacts align correctly with the charger pins. The charger supports simultaneous charging of two batteries of the same type (e.g., two EN-EL18 batteries, or two EN-EL4 batteries using two BA-T10 adapters if available, or two LP-E4 batteries using two BA-T20 adapters if available). Note: The package includes one BA-T10 and one BA-T20 adapter.
BA-T10 adapter for Nikon EN-EL4 and EN-EL4A batteries.

Figure 3: BA-T10 adapter for Nikon EN-EL4 / EN-EL4A batteries.

BA-T20 adapter for Canon LP-E19, LP-E4N, and LP-E4 batteries.

Figure 4: BA-T20 adapter for Canon LP-E19 / LP-E4N / LP-E4 batteries.

4. ऑपरेटिंग सूचना

३.७.२. चार्जिंग प्रक्रिया

  1. Once batteries are correctly inserted, the charger's LED indicators will illuminate to show the charging status.
  2. The charger features three LED indicators for each slot: 50%, 80%, and 100%. These indicate the approximate charge level of the battery.
  3. When charging is complete, the 100% LED indicator will light up, and the charger will automatically stop charging to prevent overcharging.

4.2. Calibration Function

The charger includes two "CALIBRATION" buttons, one for each charging slot. This function is designed to help optimize battery performance by fully discharging and then recharging the battery. To initiate calibration, press and hold the corresponding calibration button for approximately 1 second. The "CAL ON" indicator will illuminate. The process will complete automatically.

4.3. Approximate Charging Times

  • Nikon EN-EL4 / EN-EL4A: Approximately 3 hours per battery.
  • Canon LP-E19: Approximately 4 hours per battery.
  • Canon LP-E4 / LP-E4N: Approximately 3 hours per battery.
  • Nikon EN-EL18 / EN-EL18a: Charging times are similar to other compatible batteries, typically 2-4 hours depending on battery capacity and discharge level.
DSTE MH26A charger with BA-T10 adapter, showing 'Charging Time: EN-EL4 / EN-EL4A: about 3 hours/piece'.

Figure 5: Charger displaying approximate charging time for Nikon EN-EL4 / EN-EL4A batteries.

DSTE MH26A charger with BA-T20 adapter, showing 'Charging Time: LP-E19: about 4 hours/piece' and 'LP-E4N / LP-E4: about 3 hours/piece'.

Figure 6: Charger displaying approximate charging times for Canon LP-E19, LP-E4N, and LP-E4 batteries.

5. देखभाल

  • स्वच्छता: Disconnect the charger from power before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
  • स्टोरेज: वापरात नसताना चार्जर थेट सूर्यप्रकाशापासून आणि अति तापमानापासून दूर थंड, कोरड्या जागी ठेवा.
  • बॅटरी काळजी: Always follow the battery manufacturer's guidelines for proper battery care and storage.

6. समस्या निवारण

If you encounter issues with your DSTE MH26A charger, please refer to the following common problems and solutions:

  • चार्जर चालू होत नाही:
    • Ensure the AC power line is securely connected to both the charger and a working wall outlet.
    • वॉल आउटलेट वीज पुरवत आहे याची पडताळणी करा.
  • बॅटरी चार्ज होत नाही:
    • Ensure the battery is correctly inserted into the slot, with contacts aligned.
    • If using an adapter, ensure it is properly seated in the charger and the battery is correctly inserted into the adapter.
    • Check if the battery is compatible with the charger and adapter.
    • The battery may be faulty or at the end of its lifespan. Try charging a different, known-good battery.
  • Battery not charging to 100% (as indicated by camera):
    • While the charger indicates 100% charge, some camera models may report a slightly lower percentage due to variations in battery monitoring systems.
    • Perform a calibration cycle using the "CALIBRATION" button to optimize battery performance.
    • Ensure you are using original or DSTE brand batteries compatible with the charger.
  • Calibration button does not seem to work:
    • Ensure you press and hold the button for approximately 1 second until the "CAL ON" indicator illuminates.
    • The calibration process involves a full discharge and recharge cycle, which can take several hours. The indicator will turn off once the cycle is complete.

7. तपशील

वैशिष्ट्यतपशील
मॉडेलMH26A (DMH26A-new)
इनपुट व्हॉल्यूमtageAC 100V-240V
Auto DC Input12.6V
वारंवारता50/60Hz
आउटपुट पॉवर25-30VA
नो-लोड व्हॉलtageडीसी १२ व्ही (११-१६ व्ही)
आउटपुट वर्तमान1.2A
चार्जिंग करंट1.2A
सुसंगत बॅटरीNikon EN-EL18, EN-EL18a, EN-EL4, EN-EL4A; Canon LP-E4, LP-E4N, LP-E19 (Not compatible with DSTE EN-EL18A batteries)
परिमाण (पॅकेज)6.77 x 6.02 x 2.4 इंच
वजन (वस्तू)15.2 औंस

8. वॉरंटी माहिती

The DSTE MH26A Multi-Battery Charger comes with a 2 वर्षाची वॉरंटी from the date of purchase. This warranty covers manufacturing defects and malfunctions under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or improper maintenance.

9. ग्राहक समर्थन

For technical assistance, warranty claims, or any questions regarding your DSTE MH26A Multi-Battery Charger, please contact your retailer or the DSTE customer service department. Refer to the product packaging or the DSTE official webसध्याच्या संपर्क माहितीसाठी साइट.

You can visit the DSTE Store for more information: DSTE Official Store

© 2023 DSTE. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.