Amazon Basics मिड-बॅक ऑफिस कॉम्प्युटर टास्क डेस्क चेअर (मॉडेल GF-9390M-1) सूचना पुस्तिका

परिचय

This manual provides essential instructions for the assembly, operation, and maintenance of your Amazon Basics Mid-Back Office Computer Task Desk Chair. Please read all instructions carefully before assembly and use to ensure proper function and safety.

सुरक्षितता माहिती

चेतावणी:

• Always follow the assembly instructions provided in this user manual to ensure safe use.
• कमाल वजन क्षमता ४८४ पौंड (२२० किलो) ओलांडू नका.
• Be cautious of the swivel feature to prevent tripping.
• Ensure all screws are fully tightened before use. Periodically check and re-tighten all fasteners.

पॅकेज सामग्री

असेंब्ली सुरू करण्यापूर्वी सर्व घटक उपस्थित आहेत याची खात्री करा:

• आसन कुशन
• मागे उशी
• Gas Lift (Cylinder)
• Hardware (Screws, Hex Tool)
• Base (5-point star base)
• आर्मरेस्ट (2)
• कॅस्टर (5)
• Mechanism (for seat height and tilt)

सेटअप आणि विधानसभा

Follow these steps to assemble your office chair. An assembly video is provided for visual guidance.

1. Insert Casters: Firmly press each of the five casters (wheels) into the holes at the end of each leg of the 5-point star base. Ensure they are securely seated.
2. सिलेंडर घाला: Place the gas lift cylinder into the center hole of the assembled base. Ensure the narrower end of the cylinder points upwards.
3. सीटला यंत्रणा जोडा: Align the seat mechanism with the pre-drilled holes on the underside of the seat cushion. Use the provided screws (typically 'A' type) and the hex tool to attach it. Do not fully tighten yet.
4. Place Seat on Cylinder: Carefully place the assembled seat (with mechanism attached) onto the gas lift cylinder. The cylinder should fit snugly into the mechanism's central opening.
5. आर्मरेस्ट संलग्न करा: Position the armrests on either side of the seat, aligning them with the pre-drilled holes on both the seat and the backrest. Use the appropriate screws (typically 'B' type) to attach them. Do not fully tighten these screws at this stage.
6. बॅकरेस्ट संलग्न करा: Align the backrest with the armrests and the seat. Use the remaining screws (typically 'C' type) to secure the backrest to the armrests.
7. सर्व स्क्रू घट्ट करा: Once all components are loosely assembled, fully tighten all screws using the hex tool. Ensure all connections are firm and secure.
8. Place Screw Caps: Cover any visible screw heads with the provided plastic caps for a finished appearance.

ऑपरेटिंग सूचना

Your Amazon Basics office chair offers several adjustable features for personalized comfort:

• आसन उंची समायोजन: To raise the seat, lift the lever located under the seat while taking your weight off the chair. To lower the seat, lift the lever while remaining seated. Release the lever at the desired height.
• टिल्ट फंक्शन: The chair features a tilt mechanism. To enable tilting, pull the lever outwards. To lock the chair in an upright position, push the lever inwards.
• टिल्ट टेंशन समायोजन: Rotate the round knob located under the seat (usually at the front of the mechanism) to adjust the tension of the tilt. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).
• 360-डिग्री स्विव्हल: The chair is designed with a 360-degree swivel for easy movement and multi-tasking.
• रोलिंग कास्टर्स: The five-point base with casters allows for smooth-rolling mobility across various floor surfaces.

देखभाल

To maintain the appearance and longevity of your chair:

• स्वच्छता: जाहिरातीसह पुसून टाकाamp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the faux leather.
• फास्टनर्स: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as necessary to prevent wobbling or instability.
• कॅस्टरः गुळगुळीत गुंडाळण्यासाठी कास्टर कचरा (केस, धूळ इ.) पासून मुक्त ठेवा.

समस्यानिवारण

If you encounter issues with your chair, consider the following:

• खुर्ची अस्थिर किंवा डळमळीत वाटते: Ensure all assembly screws are fully tightened. Check the gas lift cylinder for proper seating in the base and mechanism.
• Difficulty leaning back or adjusting tilt: Check the tilt tension knob under the seat. Rotate it counter-clockwise to loosen the tension. Ensure the tilt lock lever is disengaged (pulled outwards).
• Screws not fitting or stripping: Ensure you are using the correct screws for each step as indicated in the assembly instructions. Do not overtighten screws during initial assembly; tighten fully only after all components are loosely fitted. If a screw is stripped, contact customer support for replacement parts.
• कास्टर सुरळीतपणे फिरत नाहीत: Inspect casters for trapped debris (hair, lint) and clean them. Ensure they are fully inserted into the base.

तपशील

हमी आणि समर्थन

For warranty information or technical support, please refer to the product packaging or contact Amazon Basics customer service directly. Keep your purchase receipt for any warranty claims.