Kohler 76331-CP Shower Arm with 2-Way Diverter Instruction Manual

1. उत्पादन संपलेview

The Kohler 76331-CP Shower Arm with 2-Way Diverter is a wall-mount fixture designed to direct water flow between a showerhead and a handshower. Constructed from brass, this unit features a polished chrome finish, engineered to resist corrosion and tarnishing. It includes a flange for installation and is compatible with standard 1/2-inch NPT connections.

Image 1.1: The Kohler 76331-CP Shower Arm with 2-Way Diverter, showcasing its polished chrome finish and integrated diverter mechanism.

2. सुरक्षितता माहिती

• कोणतीही स्थापना किंवा देखभाल सुरू करण्यापूर्वी नेहमीच मुख्य पाणीपुरवठा बंद करा.
• सुरक्षा चष्मा आणि हातमोजे यासारखी योग्य वैयक्तिक सुरक्षा उपकरणे घाला.
• जर तुम्हाला इन्स्टॉलेशन प्रक्रियेच्या कोणत्याही भागाबद्दल खात्री नसेल, तर पात्र प्लंबरचा सल्ला घ्या.
• गळती टाळण्यासाठी सर्व कनेक्शन सुरक्षित असल्याची खात्री करा.
• Do not overtighten connections, as this can damage the product or plumbing.

3. पॅकेज सामग्री

स्थापना सुरू करण्यापूर्वी सर्व घटक उपस्थित आहेत याची खात्री करा.

• Shower Arm with 2-Way Diverter
• बाहेरील कडा

Note: Showerheads, handshowers, and additional flanges (K-76334 Traditional flange, K-76335 Square flange) are sold separately.

4. तपशील

5. स्थापना सूचना

5.1 Tools and Materials Required (Not Included)

• समायोज्य पाना
• प्लंबर टेप (थ्रेड सीलंट)
• मऊ कापड

5.2 स्थापना चरण

1. पाणीपुरवठा बंद करा: Locate and turn off the main water supply to your shower area. Open existing shower faucets to relieve pressure.
2. Remove Existing Shower Arm (if applicable): Unscrew the existing shower arm from the wall fitting. Clean any old sealant or debris from the wall pipe threads.
3. Prepare New Shower Arm: Apply plumber's tape clockwise around the threaded end of the new Kohler shower arm (the end that connects to the wall). Ensure several wraps for a watertight seal.
4. Install Flange: Slide the decorative flange over the shower arm, ensuring it faces the wall.
5. Attach Shower Arm to Wall: Carefully thread the shower arm into the 1/2-inch NPT wall fitting. Hand-tighten first, then use an adjustable wrench to tighten an additional 1/2 to 1 full turn until secure and properly oriented. Do not overtighten.
6. Position Flange: Slide the flange flush against the wall to cover the opening.
7. Install Showerhead and Handshower: Attach your desired showerhead to the top outlet and your handshower hose to the bottom outlet of the diverter. Apply plumber's tape to these connections as well.
8. गळतीसाठी चाचणी: Slowly turn the main water supply back on. Check all connections for leaks. If leaks occur, turn off water, tighten connections slightly, and re-test.

6. ऑपरेटिंग सूचना

The 2-way diverter allows you to easily switch water flow between your main showerhead and a connected handshower.

• To use the Showerhead: Ensure the diverter handle is in the position that directs water upwards to the showerhead.
• To use the Handshower: Rotate the diverter handle to the position that directs water downwards to the handshower.
• To turn off water: Use your shower's main faucet handle to stop the water flow. The diverter only controls the direction of water, not the on/off function or temperature.

7. देखभाल आणि काळजी

• स्वच्छता: पॉलिश केलेले क्रोम फिनिश सॉफ्ट, डी ने स्वच्छ करा.amp कापड. अपघर्षक क्लीनर, कठोर रसायने किंवा स्कॉअरिंग पॅड टाळा, कारण ते फिनिशला नुकसान पोहोचवू शकतात.
• स्पॉट साफ करणे: For water spots, use a mild soap solution and rinse thoroughly with clean water, then dry with a soft cloth.
• नियमित तपासणी: Periodically check connections for any signs of leaks or corrosion.

8. समस्या निवारण

9. हमी आणि समर्थन

For specific warranty information and customer support, please refer to the official Kohler website or contact Kohler directly. Keep your purchase receipt for warranty claims.

कोहलर अधिकृत Webसाइट: www.kohler.com