परिचय
The Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock is designed to provide accurate time, indoor temperature, and convenient alarm functions. Its radio-controlled feature automatically synchronizes the time, ensuring precision. The unique projection feature allows you to view the time on your ceiling or wall, enhancing usability in low-light conditions.
प्रमुख वैशिष्ट्ये:
- Dual Alarm (Weekday/Daily alarm options)
- घरातील तापमान प्रदर्शन
- Time Projection onto ceiling or wall
- LED Backlight for LCD display
- Atomic Clock Synchronization for precise timekeeping
- स्नूझ फंक्शन
पॅकेज सामग्री
तुमच्या पॅकेजमध्ये खालील वस्तू समाविष्ट आहेत का ते तपासा:
- Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock unit
- एसी पॉवर अॅडॉप्टर
- AAA बॅटरी (2x)
- सूचना पुस्तिका (हा दस्तऐवज)
उत्पादन संपलेview
Familiarize yourself with the main components and controls of your alarm clock.
प्रतिमा: समोर view of the Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock. The image displays the clock's main body, featuring a digital LCD screen that shows time and temperature. A projection lens is visible on the top left side, designed to project the time. The clock has a clean, white finish.
फ्रंट पॅनल:
- एलसीडी डिस्प्ले: Shows current time, indoor temperature, and alarm status.
- प्रोजेक्शन लेन्स: Projects time onto a surface.
- स्नूझ/लाईट बटण: Activates snooze during alarm, illuminates backlight, or temporarily activates projection.
Rear/Side Panel:
- मोड बटण: Toggles display modes and enters setting menus.
- वर/खाली बटणे: Adjust values during settings, manually activate atomic time search.
- ALARM 1/2 Buttons: Select and set Alarm 1 or Alarm 2.
- PROJECTION ON/OFF Switch: Controls continuous projection.
- PROJECTION ROTATION Button: Rotates projected image 180 degrees.
- रीसेट बटण: Resets the unit to factory defaults.
- बॅटरी कंपार्टमेंट: बॅकअप बॅटरी ठेवते.
- डीसी इन जॅक: AC पॉवर अडॅप्टरला जोडते.
सेटअप
1. बॅटरी इन्स्टॉलेशन
- युनिटच्या मागील बाजूस असलेले बॅटरी कंपार्टमेंट कव्हर उघडा.
- Insert two (2) AAA batteries, observing the correct polarity (+ and -).
- Close the battery compartment cover. These batteries provide backup power during outages
2. Connect AC Power Adapter
- Plug the AC power adapter into the DC IN jack on the back of the clock.
- Plug the adapter into a standard wall outlet. The clock will power on, and the LCD display will activate. Continuous projection requires AC power.
3. Atomic Clock Synchronization
Upon initial power-up, the clock will automatically attempt to synchronize with the atomic clock signal. This process may take several minutes to several hours, depending on your location and signal strength. Place the clock near a window for best reception.
- A signal icon will appear on the LCD when synchronization is successful.
- To manually initiate a signal search, press and hold the UP 3 सेकंदांसाठी बटण.
३.१. वेळ क्षेत्र सेट करणे
After successful atomic synchronization, you may need to set your local time zone.
- दाबा आणि धरून ठेवा मोड वेळ सेटिंग मोडमध्ये प्रवेश करण्यासाठी 3 सेकंदांसाठी बटण.
- दाबा मोड button repeatedly until the Time Zone setting flashes.
- वापरा UP or खाली buttons to select your desired time zone (e.g., EST, CST, MST, PST).
- दाबा मोड to confirm and exit, or wait 30 seconds for automatic exit.
ऑपरेटिंग सूचना
Manual Time and Date Setting (If Atomic Sync Fails)
- दाबा आणि धरून ठेवा मोड button for 3 seconds. The hour digit will flash.
- वापरा UP or खाली तास समायोजित करण्यासाठी बटणे.
- दाबा मोड to confirm and move to the next setting (minutes, year, month, day, 12/24 hour format, Daylight Saving Time (DST) ON/OFF).
- Repeat steps 2 and 3 until all settings are adjusted.
- दाबा मोड to exit, or wait 30 seconds for automatic exit.
अलार्म सेट करणे (अलार्म १ आणि अलार्म २)
घड्याळात दोन स्वतंत्र अलार्म आहेत (अलार्म १ आणि अलार्म २).
- दाबा अलार्म 1 or अलार्म 2 वर्तमान अलार्म वेळ प्रदर्शित करण्यासाठी एकदा बटण दाबा.
- संबंधित दाबा आणि धरून ठेवा अलार्म button for 3 seconds. The alarm hour will flash.
- वापरा UP or खाली अलार्म तास समायोजित करण्यासाठी बटणे.
- दाबा अलार्म button to confirm and move to alarm minutes.
- Adjust alarm minutes using UP or खाली.
- दाबा अलार्म button to confirm and move to alarm type (Daily or Weekday).
- Adjust alarm type using UP or खाली.
- दाबा अलार्म button to confirm and exit, or wait 30 seconds for automatic exit.
अलार्म सक्रिय किंवा निष्क्रिय करण्यासाठी, दाबा अलार्म 1 or अलार्म 2 button once. An alarm icon will appear on the LCD when active.
स्नूझ फंक्शन
जेव्हा अलार्म वाजतो, तेव्हा दाबा स्नूझ / लाईट button to temporarily silence the alarm for approximately 8 minutes. The alarm will sound again after the snooze period. To stop the alarm completely, press any other button.
वेळ प्रोजेक्शन
- Continuous Projection: स्लाइड करा प्रकल्प चालू/बंद वर स्विच करा ON. The time will be continuously projected. This feature requires the AC power adapter to be connected.
- Temporary Projection: If continuous projection is off, press the स्नूझ / लाईट button to activate projection for approximately 15 seconds.
- Projection Orientation: दाबा प्रोजेक्शन रोटेशन button to flip the image 180 degrees, ensuring it is displayed right-side up on your chosen surface.
- Adjusting Projection Angle: The projection lens can be manually tilted to adjust the projection angle on your ceiling or wall.
एलईडी बॅकलाइट
दाबा स्नूझ / लाईट button to illuminate the LCD display backlight for approximately 15 seconds.
देखभाल
युनिट साफ करणे
घड्याळ सॉफ्टने पुसून टाका, damp cloth. Do not use abrasive cleaners or solvents, as these may damage the unit. Ensure the unit is unplugged from the AC power before cleaning.
बॅटरी बदलणे
When the backup batteries are low, the display may dim or settings may be lost during power outages. Replace the two (2) AAA batteries in the battery compartment, observing correct polarity.
समस्यानिवारण
| समस्या | उपाय |
|---|---|
| घड्याळाचा डिस्प्ले रिकामा किंवा मंद आहे. | Ensure the AC power adapter is securely connected to both the clock and a working wall outlet. Check if backup batteries are installed correctly and are not depleted. |
| Atomic time synchronization fails or is inaccurate. | Place the clock near a window, away from electronic devices that may cause interference. Manually initiate a signal search by holding the UP button. If synchronization consistently fails, manually set the time and date. |
| Time projection is not visible or is dim. | Ensure the AC power adapter is connected for continuous projection. Check the प्रकल्प चालू/बंद switch. Adjust the projection lens angle. Ensure the room is sufficiently dark for optimal visibility. |
| Projected time is upside down or backwards. | दाबा प्रोजेक्शन रोटेशन button to flip the image 180 degrees. Adjust the physical orientation of the clock if needed. |
| अलार्म वाजत नाही. | Ensure the alarm is activated (alarm icon visible on LCD). Verify the alarm time is set correctly. Check if the volume is not set to minimum (if applicable, though this model doesn't specify volume control). |
| Snooze/Light button only activates backlight for 15 seconds, not 5 minutes. | The backlight duration is fixed at approximately 15 seconds for temporary illumination. The 5-minute duration mentioned in some older documentation may not apply to this specific model. |
तपशील
| वैशिष्ट्य | तपशील |
|---|---|
| मॉडेल | RM338PA |
| परिमाण (LxWxH) | ५.९१" x १.९७" x १.९७" (१५.०१ सेमी x ५.०० सेमी x ५.०० सेमी) |
| वजन | 0.24 एलबीएस (109 ग्रॅम) |
| अंतर्गत तापमान श्रेणी | -5°C ते 50°C (23°F ते 122°F) |
| तापमान अचूकता | 0°C to 40°C: ±1°C (±2°F); 40°C to 0°C: ±2°C (±4°F) |
| तापमान रिझोल्यूशन | 0.1°C (0.2°F) |
| वीज पुरवठा | AC Power Adapter (included), 2 x UM-4 (AAA) 1.5V batteries (for backup) |
| डिस्प्ले प्रकार | एलईडी बॅकलाइटसह डिजिटल एलसीडी |
| विशेष वैशिष्ट्ये | Atomic Time, Time Projection, Dual Alarm, Snooze, Indoor Temperature |
हमी माहिती
Oregon Scientific products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Oregon Scientific webसाइट. खरेदीचा पुरावा म्हणून तुमची खरेदी पावती ठेवा.
ग्राहक समर्थन
If you encounter any issues or have questions regarding your Oregon Scientific RM338 PROJI Projection Atomic Alarm Clock, please visit the official Oregon Scientific support website or contact their customer service department for assistance. Contact information can typically be found on the manufacturer's webसाइट किंवा उत्पादन पॅकेजिंगमध्ये.