1. परिचय
Thank you for choosing the Deca Parva 145E Welding Machine. This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your new welding equipment. Please read this manual thoroughly before using the machine and keep it for future reference.
The Deca Parva 145E is designed for various welding tasks, offering reliable performance for both hobbyists and professionals. Proper understanding and adherence to these instructions will ensure optimal results and prolong the life of your machine.
2. सुरक्षितता सूचना
इशारा: वेल्डिंग धोकादायक असू शकते. गंभीर दुखापत किंवा मृत्यू टाळण्यासाठी नेहमी सुरक्षा खबरदारी पाळा.
- विजेचा धक्का: Welding current can cause fatal electric shock. Ensure proper grounding. Do not touch live electrical parts. Wear dry, insulated gloves.
- धूर आणि वायू: Welding fumes and gases can be hazardous to your health. Work in a well-ventilated area. Use a fume extractor if necessary.
- आर्क किरण: Arc rays can burn eyes and skin. Wear a welding helmet with appropriate shade filter and protective clothing.
- आग आणि स्फोट: Welding sparks and hot metal can cause fire or explosions. Keep flammable materials away from the welding area. Have a fire extinguisher readily available.
- बर्न्स: Hot metal and slag can cause severe burns. Wear protective gloves and clothing.
- Pace Makers: पेसमेकर असलेल्या व्यक्तींनी हे उपकरण वापरण्यापूर्वी त्यांच्या डॉक्टरांचा सल्ला घ्यावा.
- कोणतीही देखभाल किंवा सेवा करण्यापूर्वी नेहमी वीज खंडित करा.
3. पॅकेज सामग्री
बॉक्स काळजीपूर्वक उघडा आणि सर्व वस्तू तिथे आहेत आणि त्या सुरक्षित आहेत याची खात्री करा. जर काही वस्तू गहाळ किंवा खराब झाल्या असतील तर ताबडतोब तुमच्या किरकोळ विक्रेत्याशी संपर्क साधा.
- Deca Parva 145E Welding Machine
- केबलसह इलेक्ट्रोड होल्डर
- ग्राउंड Clamp केबल सह
- Welding Mask (Handheld)
- Chipping Hammer / Wire Brush
- सूचना पुस्तिका
4. उत्पादन संपलेview
The Deca Parva 145E is a compact and robust welding machine designed for various arc welding applications. Below is an image illustrating the main unit and its included accessories.
आकृती 1: Deca Parva 145E Welding Machine and included accessories. The image displays the yellow main welding unit, a black handheld welding mask, a black chipping hammer with a wire brush, an electrode holder, and a ground clamp.
मुख्य घटक:
- मुख्य युनिट: पिवळा कasing with control panel.
- उर्जा कळ: चालू/बंद नियंत्रण.
- सध्याचा समायोजन नॉब: For stepless welding current regulation.
- Thermal Protection Indicator: Illuminates when the machine overheats.
- आउटपुट टर्मिनल: Connections for electrode holder and ground clamp.
- इलेक्ट्रोड होल्डर: Secures the welding electrode.
- ग्राउंड Clamp: इलेक्ट्रिकल सर्किट पूर्ण करण्यासाठी वर्कपीसशी जोडते.
- Welding Mask: Provides eye and face protection from arc rays and sparks.
- Chipping Hammer/Wire Brush: Used for removing slag and cleaning welds.
5. सेटअप
- प्लेसमेंट: Place the welding machine on a stable, level surface in a well-ventilated area, away from flammable materials. Ensure adequate space around the machine for air circulation.
- वीज कनेक्शन: Connect the machine's power cord to a suitable grounded electrical outlet. Ensure the power supply matches the machine's requirements (refer to specifications).
- ग्राउंड क्लॅम्प कनेक्ट कराamp: ग्राउंड cl संलग्न कराamp cable to the appropriate output terminal on the welding machine. Securely attach the ground clamp वर्कपीस किंवा वेल्डिंग टेबलशी, चांगला विद्युत संपर्क सुनिश्चित करणे.
- Connect Electrode Holder: Attach the electrode holder cable to the other output terminal on the welding machine. Insert a suitable electrode into the electrode holder. The recommended electrode size for this machine is 1.6mm to 3.2mm.
- वैयक्तिक संरक्षणात्मक उपकरणे (PPE): Before turning on the machine, ensure you are wearing all necessary PPE, including a welding helmet, welding gloves, and protective clothing.
6. ऑपरेटिंग सूचना
- चालू करा: Switch the main power switch to the "ON" position.
- Set Welding Current: Adjust the current adjustment knob to the desired welding current. The appropriate current setting depends on the electrode diameter and the material thickness being welded. Start with a lower setting and increase as needed.
- वर्कपीस तयार करा: Ensure the workpiece is clean and free of rust, paint, or grease to ensure a good weld.
- Strike an Arc: While wearing your welding helmet, gently tap or scratch the electrode against the workpiece to strike an arc. Once the arc is established, maintain a consistent arc length and travel speed.
- वेल्डिंग: Move the electrode along the joint, maintaining a steady hand and angle. Observe the weld pool and adjust your technique as necessary.
- थर्मल संरक्षण: If the thermal protection indicator illuminates, the machine has overheated. Turn off the machine and allow it to cool down before resuming operation. Do not bypass this safety feature.
- Finish Welding: When finished, lift the electrode from the workpiece to break the arc. Turn off the welding machine.
- Post-Weld Cleaning: Use the chipping hammer to remove slag from the weld bead, then use the wire brush to clean the weld.
7. देखभाल
नियमित देखभालीमुळे तुमच्या वेल्डिंग मशीनचे दीर्घायुष्य आणि सुरक्षित ऑपरेशन सुनिश्चित होते.
- स्वच्छता: Periodically clean the machine's exterior with a dry cloth. Use compressed air to blow out dust and debris from the ventilation openings. Ensure the machine is unplugged before cleaning.
- केबल तपासणी: Regularly inspect all cables (power, electrode, ground) for cuts, fraying, or damage. Replace damaged cables immediately.
- टर्मिनल कनेक्शन: Ensure all terminal connections are tight and free of corrosion.
- स्टोरेज: Store the welding machine in a dry, clean environment, away from moisture and extreme temperatures.
- Electrode Holder and Ground Clamp: Keep these accessories clean and in good working condition. Replace if damaged.
8. समस्या निवारण
| समस्या | संभाव्य कारण | उपाय |
|---|---|---|
| मशीनला शक्ती नाही. | Power cord unplugged, faulty outlet, tripped circuit breaker. | Check power connection, test outlet, reset circuit breaker. |
| Machine turns on but no arc. | Poor ground connection, incorrect current setting, faulty electrode holder/cable, wet electrode. | जमिनीची साखळी सुनिश्चित कराamp is securely attached to clean metal. Adjust current. Inspect cables and holder. Use dry electrodes. |
| Thermal protection light is on. | Machine overheated due to prolonged use or insufficient ventilation. | Turn off the machine and allow it to cool down. Ensure proper ventilation. Reduce duty cycle. |
| Poor weld quality (e.g., porosity, lack of penetration). | Incorrect current, improper arc length, wrong electrode, dirty workpiece, incorrect travel speed. | Adjust current, maintain proper arc length, use correct electrode for material, clean workpiece, adjust travel speed. |
जर तुम्हाला येथे सूचीबद्ध नसलेल्या समस्या येत असतील किंवा सुचवलेल्या उपायांमुळे समस्या सुटत नसेल, तर कृपया ग्राहक समर्थनाशी संपर्क साधा.
9. तपशील
| वैशिष्ट्य | तपशील |
|---|---|
| ब्रँड | डेका |
| मॉडेलचे नाव | Parva 145E |
| भाग क्रमांक | 0400193 |
| आयटम मॉडेल क्रमांक | 322006 |
| वेल्डिंग वर्तमान | स्टेपलेस समायोजन |
| Electrode Diameter Range | ० मिमी - ७ मिमी |
| उर्जा स्त्रोत प्रकार | इलेक्ट्रिक (AC) |
| उत्पादन परिमाणे | 390 x 210 x 280 mm (from description) / 24.99 x 16.99 x 29.49 cm (from specifications) |
| आयटम वजन | 14.5 kg (from description) / 14.3 kg (from specifications) |
| उत्पादक | DECA |
| तारीख प्रथम उपलब्ध | ८ सप्टेंबर २०२२ |
टीप: उत्पादन सुधारणेसाठी सूचना न देता तपशील बदलू शकतात.
10. हमी आणि समर्थन
For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. Deca products are manufactured to high-quality standards, and support is available for any operational issues or technical inquiries.
If you require technical assistance or have questions regarding your Deca Parva 145E Welding Machine, please contact the authorized Deca service center or your point of purchase. When contacting support, please have your model number (0400193 / 322006) and purchase date available.