1. सुरक्षितता माहिती
This Kidde Pi9010 Dual Sensor Smoke Alarm is designed to provide early warning of fire. For optimal protection, it combines both ionization and photoelectric sensing technologies to detect both fast-flaming and slow-smoldering fires.
- महत्त्वाचे: स्थापना आणि ऑपरेशन करण्यापूर्वी सर्व सूचना वाचा.
- प्लेसमेंट: Install smoke alarms on every floor of your home, inside each bedroom, and outside sleeping areas.
- चाचणी: योग्य कार्य सुनिश्चित करण्यासाठी अलार्मची दर आठवड्याला चाचणी करा.
- UL सूचीबद्ध: This dual-sensor smoke alarm is UL listed, ensuring compliance with safety standards.
2. उत्पादन संपलेview
The Kidde Pi9010 is a battery-operated smoke alarm featuring dual sensing technology for comprehensive fire detection. It includes a Hush feature to temporarily silence nuisance alarms and a test/reset button for easy verification of operation.
प्रमुख वैशिष्ट्ये:
- Dual Photoelectric and Ionization Sensors
- 9-Volt Battery Powered (battery included)
- Hush Feature for Nuisance Alarms
- चाचणी/रीसेट बटण
- Red LED Indicator for operational status
- कमी बॅटरी चेतावणी
बॉक्समध्ये काय आहे:
- Kidde Pi9010 Dual Sensor Smoke Alarm
- माउंटिंग ब्रॅकेट
- माउंटिंग हार्डवेअर
- 9-व्होल्ट बॅटरी
- वापरकर्त्याचे मॅन्युअल
3. सेटअप आणि स्थापना
3.1 बॅटरी इंस्टॉलेशन
The Kidde Pi9010 smoke alarm operates on a standard 9-volt battery, which is included. Ensure the battery is correctly installed before mounting the alarm.
- Open the battery compartment on the back of the alarm.
- Connect the 9-volt battery to the battery clip, ensuring correct polarity.
- Place the battery into the compartment and close the cover securely.
Figure 1: Battery installation in the Kidde Pi9010 smoke alarm.
४.२ अलार्म बसवणे
Select a suitable location for your smoke alarm, typically on the ceiling or high on a wall, away from corners and obstructions. Use the provided mounting bracket and hardware.
- Attach the mounting bracket to the ceiling or wall using the screws provided.
- अलार्मला माउंटिंग ब्रॅकेटशी संरेखित करा आणि तो जागी लॉक होईपर्यंत घड्याळाच्या दिशेने फिरवा.
- Perform an initial test as described in Section 4.1.
4. ऑपरेटिंग सूचना
४.२ अलार्मची चाचणी करणे
तुमचा स्मोक अलार्म योग्यरित्या काम करत आहे याची खात्री करण्यासाठी आठवड्यातून एकदा त्याची चाचणी घ्या.
- Press and hold the test/reset button located on the front of the alarm.
- The alarm will sound a loud, pulsating horn. Release the button once the horn sounds.
- जर अलार्म वाजला नाही, तर समस्यानिवारण विभाग पहा.
६.४ शांतता वैशिष्ट्य
The Hush feature temporarily silences the alarm for approximately seven minutes during non-emergency situations, such as cooking fumes.
- To activate, press the Hush button when the alarm is sounding due to a nuisance condition.
- The alarm will silence, and the red LED will flash every 30-40 seconds to indicate it is in Hush mode.
- After approximately seven minutes, the alarm will automatically reset. If smoke is still present, the alarm will sound again.
Video 1: Official Kidde video demonstrating the Dual Photoelectric & Ionization Sensor Smoke Detector. This video provides a visual overview of the product's features and benefits.
5. देखभाल
5.1 बॅटरी बदलणे
The alarm will emit a brief chirp every 30 to 40 seconds for at least seven days when the 9-volt battery needs replacement.
- Twist the alarm counter-clockwise to remove it from the mounting bracket.
- Open the battery compartment and disconnect the old 9-volt battery.
- Connect a new 9-volt battery, ensuring correct polarity, and close the compartment.
- Reattach the alarm to the mounting bracket and test its operation.
5.2 Cleaning Your Alarm
Clean your smoke alarm regularly to prevent dust and debris from interfering with its operation.
- Use a soft brush attachment on your vacuum cleaner to gently remove dust from the alarm's cover and vents.
- Do not use water, cleaners, or solvents, as these can damage the unit.
6. समस्या निवारण
| समस्या | संभाव्य कारण | उपाय |
|---|---|---|
| दर 30-40 सेकंदांनी अलार्म वाजतो | कमी बॅटरी | Replace the 9-volt battery (see Section 5.1). |
| Nuisance alarms (e.g., from cooking) | Smoke or steam from non-fire sources | Use the Hush feature (see Section 4.2). Ventilate the area. |
| चाचणी दरम्यान अलार्म वाजत नाही | Battery not installed or dead; unit malfunction | Check battery installation/replace. If problem persists, replace unit. |
| Alarm sounds continuously without smoke | Dust buildup; unit malfunction | Clean the alarm (see Section 5.2). If problem persists, replace unit. |
7. तपशील
- ब्रँड: किडे
- मॉडेल क्रमांक: Pi9010 (Manufacturer Part Number: 21026062-N)
- उर्जा स्त्रोत: 9-व्होल्ट बॅटरी
- सेन्सर प्रकार: Ionization and Photoelectric (Dual Sensor)
- अलार्म प्रकार: श्रवणीय
- रंग: पांढरा
- परिमाणे: Approximately 5.75 inches (diameter) x 1.8 inches (depth)
- ऑपरेटिंग तापमान: 40°F (4.4°C) ते 100°F (37.8°C)
- आर्द्रता श्रेणी: 10-95% सापेक्ष आर्द्रता, नॉन-कंडेन्सिंग
- प्रमाणपत्रे: UL सूचीबद्ध
- UPC: 047871260621
8. हमी आणि समर्थन
The Kidde Pi9010 Dual Sensor Smoke Alarm is backed by a 10 वर्षांची मर्यादित वॉरंटी. This warranty covers defects in materials and workmanship from the date of purchase.
For complete warranty details, technical support, or assistance with your product, please refer to the full user manual included in the packaging or visit the official Kidde webसाइट
Contact your local fire department for additional fire preparedness tips and safety information.