Silverline 850W SDS Plus Hammer Drill (Model 633821) User Manual

1. परिचय

Thank you for choosing the Silverline 850W SDS Plus Hammer Drill, Model 633821. This powerful and versatile tool is designed for drilling in masonry, wood, and steel, as well as for light chiseling tasks. To ensure safe and efficient operation, please read this manual thoroughly before using the tool. Keep this manual in a safe place for future reference.

Image 1.1: The Silverline 850W SDS Plus Hammer Drill. This image shows the main unit of the hammer drill, highlighting its robust construction and ergonomic design.

2. सुरक्षितता सूचना

Always follow basic safety precautions to reduce the risk of fire, electric shock, and personal injury. This section outlines general safety guidelines for power tools and specific precautions for hammer drills.

2.1 सामान्य उर्जा साधन सुरक्षा

• कार्य क्षेत्र सुरक्षा: तुमचे कामाचे क्षेत्र स्वच्छ आणि चांगले प्रकाशमान ठेवा. गोंधळलेले किंवा अंधारे भाग अपघातांना आमंत्रण देतात. ज्वलनशील द्रव, वायू किंवा धूळ यांच्या उपस्थितीत, स्फोटक वातावरणात वीज साधने चालवू नका.
• विद्युत सुरक्षा: पॉवर टूल प्लग आउटलेटशी जुळले पाहिजेत. प्लगमध्ये कधीही कोणत्याही प्रकारे बदल करू नका. पाईप्स, रेडिएटर्स, रेंज आणि रेफ्रिजरेटर्स सारख्या मातीच्या किंवा जमिनीवर असलेल्या पृष्ठभागांशी शरीराचा संपर्क टाळा.
• वैयक्तिक सुरक्षा: Always wear eye protection. Use hearing protection when operating noisy tools. Wear a dust mask if operations create dust. Dress properly; avoid loose clothing or jewelry that can get caught in moving parts.
• साधन वापर आणि काळजी: पॉवर टूल जबरदस्तीने लावू नका. तुमच्या वापरासाठी योग्य पॉवर टूल वापरा. ​​कोणतेही समायोजन करण्यापूर्वी, अॅक्सेसरीज बदलण्यापूर्वी किंवा पॉवर टूल्स साठवण्यापूर्वी प्लग पॉवर सोर्सपासून डिस्कनेक्ट करा.

2.2 Specific Hammer Drill Safety

• Hold Tool Firmly: Always hold the tool firmly with both hands to maintain control, especially during hammer drilling or chiseling.
• सुरक्षित वर्कपीस: वर्कपीस स्थिर आणि सुरक्षितपणे घट्ट असल्याची खात्री कराampऑपरेशन दरम्यान हालचाली टाळण्यासाठी ed.
• Check for Hidden Utilities: Before drilling into walls, floors, or ceilings, check for hidden electrical wires, gas pipes, or water pipes using a suitable detector.
• धूळ व्यवस्थापन: Drilling and chiseling can generate significant dust. Use a dust guard and wear a dust mask to protect your respiratory system.
• जास्त गरम होणे: जास्त गरम होण्यापासून रोखण्यासाठी दीर्घकाळ वापर करताना टूल थंड होऊ द्या.

3. पॅकेज सामग्री

Carefully unpack the Silverline 850W SDS Plus Hammer Drill and check that all items are present and undamaged. If any items are missing or damaged, please contact your retailer.

• Silverline 850W SDS Plus Hammer Drill
• Durable Carry Case
• 13 मिमी कीड चक
• चक की
• SDS Plus Shaft and Screw
• SDS Plus Masonry Drill Bits (6mm, 8mm, 10mm)
• सपाट छिन्नी
• Pointed Chisel
• डेप्थ स्टॉप
• पिन पाना
• डस्ट गार्ड
• Grease Pot
• वापरकर्ता मॅन्युअल

Image 3.1: The Silverline 850W SDS Plus Hammer Drill, its durable carry case, and included accessories.

प्रतिमा ४: क्लोज-अप view of the included accessories, including SDS Plus drill bits, chisels, depth stop, pin wrench, and grease pot.

4. उत्पादनाची वैशिष्ट्ये

The Silverline 850W SDS Plus Hammer Drill is equipped with features designed for performance and user convenience:

• शक्तिशाली 850W मोटर: पुरवतो ample power for demanding drilling and chiseling tasks.
• एकाधिक ऑपरेटिंग मोड: Easily switch between Drill, Hammer Drill, and Rotary Stop Chisel modes for various applications.
• SDS Plus Chuck System: For quick, tool-free bit changes and efficient power transfer.
• Integrated Safety Clutch: Protects the user and the tool in case of bit jamming.
• व्हेरिएबल स्पीड कंट्रोल: Allows for precise control over drilling speed, up to 800 RPM.
• High Impact Force: Delivers 3.5 Joules of impact energy at 4,000 impacts per minute for effective masonry work.
• सहाय्यक हँडल: Provides improved control and comfort during operation.
• खोली थांबा: For consistent drilling depth.

5. सेटअप

Before operating the hammer drill, ensure it is properly set up for your task.

४.१ सहाय्यक हँडल जोडणे

1. घड्याळाच्या उलट दिशेने फिरवून सहाय्यक हँडल सैल करा.
2. ड्रिल बॉडीच्या पुढच्या बाजूला हँडल सरकवा.
3. Adjust the handle to a comfortable and secure position, then tighten it by twisting clockwise.

5.2 Inserting SDS Plus Bits

1. Clean the shank of the SDS Plus bit and apply a small amount of grease (from the supplied pot) to it.
2. Pull back the chuck sleeve on the drill.
3. Insert the SDS Plus bit into the chuck until it clicks into place.
4. Release the chuck sleeve. Pull on the bit to ensure it is securely locked. The bit should have a small amount of axial play, which is normal for SDS Plus systems.

5.3 Using the 13mm Keyed Chuck (for standard drill bits)

For drilling in wood or metal with standard round or hex shank drill bits, use the included 13mm keyed chuck.

1. Ensure the hammer drill is in 'Drill' mode (no hammer action).
2. Insert the SDS Plus shaft of the 13mm keyed chuck into the SDS Plus chuck of the hammer drill as described in section 5.2.
3. Open the jaws of the 13mm chuck using the chuck key.
4. Insert your standard drill bit and tighten the chuck jaws securely with the chuck key.

5.4 ऑपरेटिंग मोड सेट करणे

The mode selector switch allows you to choose between three operating modes:

• ड्रिल मोड (फक्त फिरवणे): For drilling in wood, metal, and plastics.
• Hammer Drill Mode (Rotation with Hammer Action): For drilling in concrete, brick, and other masonry materials.
• Rotary Stop Chisel Mode (Hammer Action Only): हलक्या छिन्नी, चिप्स आणि पाडण्याच्या कामासाठी.

Rotate the mode selector switch to the desired setting. Ensure it clicks firmly into place.

5.5 डेप्थ स्टॉप समायोजित करणे

1. सहाय्यक हँडल सोडवा.
2. Insert the depth stop rod through the hole in the auxiliary handle.
3. Adjust the rod so that the desired drilling depth is achieved when the end of the rod touches the workpiece.
4. Tighten the auxiliary handle to secure the depth stop.

6. ऑपरेटिंग सूचना

Follow these steps for safe and effective operation of your hammer drill.

6.1 सुरू करणे आणि थांबवणे

• सुरू करण्यासाठी: Plug the tool into a suitable power outlet. Press the ON/OFF trigger switch.
• थांबण्यासाठी: चालू/बंद ट्रिगर स्विच सोडा.
• सतत ऑपरेशन: For continuous operation, press the ON/OFF trigger switch and then press the lock-on button. To release, press the trigger switch again.

6.2 वेग नियंत्रण

The drill features variable speed control. The drilling speed can be adjusted by the pressure applied to the trigger switch. For higher speeds, press the trigger further. For lower speeds, apply less pressure.

6.3 Drilling in Masonry (Hammer Drill Mode)

1. Select 'Hammer Drill' mode.
2. Insert an appropriate SDS Plus masonry drill bit.
3. Position the drill bit on the desired drilling point.
4. Start the drill at a low speed and gradually increase. Apply firm, steady pressure. Do not force the drill; let the hammer action do the work.

6.4 Drilling in Wood and Metal (Drill Mode)

1. Select 'Drill' mode.
2. Insert a standard drill bit using the 13mm keyed chuck (see section 5.3).
3. Position the drill bit on the desired drilling point.
4. Start the drill at a low speed and gradually increase. Apply moderate pressure.

6.5 Chiseling (Rotary Stop Chisel Mode)

1. Select 'Rotary Stop Chisel' mode.
2. Insert a flat or pointed SDS Plus chisel.
3. Position the chisel on the material to be removed.
4. ड्रिल सुरू करा आणि स्थिर दाब द्या. छिन्नीला इच्छित मार्गावर मार्गदर्शन करा.

7. देखभाल

नियमित देखभालीमुळे तुमच्या उपकरणाचे दीर्घायुष्य आणि इष्टतम कार्यप्रदर्शन सुनिश्चित होते. कोणतीही देखभाल करण्यापूर्वी ते उपकरण नेहमी वीज पुरवठ्यापासून डिस्कनेक्ट करा.

7.1 स्वच्छता

• जास्त गरम होऊ नये म्हणून वेंटिलेशन स्लॉट्स स्वच्छ ठेवा.
• नियमितपणे टूल हाऊसिंग सॉफ्ट, डी ने स्वच्छ करा.amp कापड कठोर रसायने किंवा अपघर्षक क्लीनर वापरू नका.
• प्रत्येक वापरानंतर चक आणि बिट होल्डरमधील कोणतीही धूळ किंवा मोडतोड काढून टाका.

7.2 स्नेहन

The SDS Plus chuck mechanism requires periodic lubrication. Use the supplied grease or a suitable equivalent for SDS Plus systems.

• Apply a small amount of grease to the shank of SDS Plus bits before insertion.
• Refer to the tool's internal lubrication points (often accessible via a screw cap) for periodic greasing of the hammer mechanism. Consult a qualified service technician if unsure.

६.२ कार्बन ब्रश बदलणे

This tool uses carbon brushes, which are wear parts. When the carbon brushes wear down, the motor may spark excessively or stop working. Carbon brushes should be replaced by a qualified service technician.

५.८.१ स्टोरेज

Store the tool in its durable carry case in a dry, secure place, out of reach of children.

8. समस्या निवारण

हा विभाग तुमच्या हॅमर ड्रिलमध्ये येणाऱ्या सामान्य समस्यांबद्दल चर्चा करतो.

If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact Silverline customer support or a qualified service center.

9. तपशील

Technical data for the Silverline 850W SDS Plus Hammer Drill, Model 633821.

10. हमी आणि समर्थन

९.१ उत्पादकाची हमी

The Silverline 850W SDS Plus Hammer Drill (Model 633821) comes with a २ वर्षांची उत्पादकाची वॉरंटी. ही वॉरंटी सामान्य वापरात असलेल्या साहित्यातील दोष आणि कारागिरीला व्यापते. वॉरंटी दाव्यांसाठी कृपया खरेदीचा पुरावा जपून ठेवा.

For full terms and conditions of the warranty, please refer to the warranty card included with your product or visit the official Silverline webसाइट

10.2 ग्राहक समर्थन

For technical assistance, spare parts, or service inquiries, please contact Silverline customer support. Contact details can typically be found on the Silverline webसाइटवर किंवा उत्पादन पॅकेजिंगवर.

सपोर्टशी संपर्क साधताना, कृपया तुमचा उत्पादन मॉडेल नंबर (२१००५४) आणि सिरीयल नंबर (लागू असल्यास) तयार ठेवा.